Flow organization and heat transfer in two-dimensional tilted convection with aspect ratio 0.5

被引:20
|
作者
Wang, Qi [1 ]
Wan, Zhen-Hua [1 ]
Yan, Rui [1 ]
Sun, De-Jun [1 ]
机构
[1] Univ Sci & Technol China, Dept Modern Mech, Hefei 230027, Anhui, Peoples R China
基金
中国国家自然科学基金;
关键词
TURBULENT THERMAL-CONVECTION; RAYLEIGH-BENARD CONVECTION; BOUNDARY-LAYER STRUCTURE; ULTIMATE REGIME; PRANDTL; NUMBER; STATISTICS; TRANSPORT; CELL;
D O I
10.1063/1.5070132
中图分类号
O3 [力学];
学科分类号
08 ; 0801 ;
摘要
Thermal convection in a two-dimensional tilted cell with aspect ratio (Gamma = width/height) 0.5 is studied using direct numerical simulations. The considered tilt angle beta ranges from 0 degrees to 90 degrees. The Prandtl number Pr dependence is first studied in the range of 0.01 <= Pr <= 100 for a fixed Rayleigh number Ra = 10(7). The Ra dependence is also investigated in the range of 10(6) <= Ra <= 10(9) for a fixed Pr = 0.71. Different flow states are identified over the beta-Pr parameter space. It is found that the flow tends to organize in stable vertically-stacked double-roll state (DRS) for small Pr and small beta, while this DRS becomes unstable and flow reversals happen with the increase of beta. This finding complements our previous study of flow reversals in tilted cells with Gamma = 1 and 2 [Wang et al., J. Fluid Mech. 849, 355-372 (2018)]. For relatively larger Pr, the flow gives way to a stable triple-roll state or an unstable triple-roll state for small beta. Moreover, multiple states in the turbulent regime are found for Ra >= 10(8), between which the flow can or cannot switch. In the latter case, the Nu are different for the two states with the same number of convection rolls, but different orientations. It is found that the Nu(beta)/Nu(0) and Re(beta)/Re(0) dependence is strongly influenced by a combination of Ra and Pr. In the present system, we interestingly find that the earlier conclusion that Nu decreases with increasing beta close to beta = 90 degrees for Gamma = 1 does not hold for the present Gamma = 0.5 case with small Pr. Published under license by AIP Publishing.
引用
收藏
页数:12
相关论文
共 50 条
  • [41] Continental collisions in wide aspect ratio and high Rayleigh number two-dimensional mantle convection models
    Lowman, JP
    Jarvis, GT
    JOURNAL OF GEOPHYSICAL RESEARCH-SOLID EARTH, 1996, 101 (B11) : 25485 - 25497
  • [42] Convective heat transfer of the Taylor flow in a two-dimensional piston pump
    Chang, Liang
    Li, Zhiwei
    Jia, Wenang
    Li, Sheng
    Ruan, Jian
    PLOS ONE, 2022, 17 (10):
  • [43] Two-dimensional study of heat transfer characteristics flow in a corrugated channel
    Benchabi, R.
    Lanani, A.
    MECHANIKA, 2016, (02): : 112 - 118
  • [44] Two-dimensional turbulent flow and heat transfer in tall glazing cavities
    Power, JP
    Curcija, D
    Goss, WP
    THERMAL PERFORMANCE OF THE EXTERIOR ENVELOPES OF BUILDINGS VII, CONFERENCE PROCEEDINGS, 1998, : 385 - 395
  • [45] Investigation on the heat transfer of energy piles with two-dimensional groundwater flow
    Zhang, Wenke
    Yang, Hongxing
    Lu, Lin
    Fang, Zhaohong
    INTERNATIONAL JOURNAL OF LOW-CARBON TECHNOLOGIES, 2017, 12 (01) : 43 - 50
  • [46] Rayleigh-Benard type natural convection heat transfer in two-dimensional geometries
    Gawas, Amitkumar S.
    Patil, Dhiraj, V
    APPLIED THERMAL ENGINEERING, 2019, 153 : 543 - 555
  • [47] Effect of heat-flux ratio on two-dimensional horizontal channel flow
    Torii, S
    Yang, WJ
    JOURNAL OF THERMOPHYSICS AND HEAT TRANSFER, 2004, 18 (01) : 73 - 78
  • [48] NATURAL-CONVECTION HEAT-TRANSFER IN MODERATE ASPECT RATIO ENCLOSURES
    MEYER, BA
    MITCHELL, JW
    ELWAKIL, MM
    JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 1979, 101 (04): : 655 - 659
  • [49] Laminar Forced Convection Heat Transfer From Isothermal Bodies With Unity Aspect Ratio in Coaxial Air Flow
    Hadad, Yaser
    Jafarpur, Khosrow
    HEAT TRANSFER ENGINEERING, 2012, 33 (03) : 245 - 254
  • [50] NATURAL CONVECTION HEAT TRANSFER IN VERTICAL FLUID LAYERS OF HIGH ASPECT RATIO
    Masuoka, Takashi
    Kakimoto, Yasushi
    Ito, Hirokazu
    Inoue, Koichi
    PROCEEDINGS OF THE ASME/JSME 8TH THERMAL ENGINEERING JOINT CONFERENCE 2011, VOL 1 PTS A AND B, 2011, : 617 - +