Microstructure and Mechanical Properties of As-extruded Mg-5Li-3Al-2Zn-xY Alloy

被引:0
|
作者
Cui Chongliang [1 ]
Liu Xuhe [1 ]
Wu Libin [1 ]
Wu Ruizhi [1 ]
Zhang Minlin [1 ]
Qu Zhikun [1 ,2 ]
Zhu Jiajun [2 ]
Wang Chunfeng [2 ]
机构
[1] Harbin Engn Univ, Key Lab Superlight Mat & Surface Technol, Minist Educ, Harbin 150001, Peoples R China
[2] Harbin Normal Univ, Harbin 150025, Peoples R China
关键词
extrusion deformation; magnesium-lithium alloy; yttrium;
D O I
暂无
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The microstructure and mechanical properties of as-extruded Mg-5Li-3Al-2Zn-xY alloy were investigated by optical microscope, scanning electron microscope, and X-ray diffraction. The results show that the grains of the alloy were refined due to the dynamic recrystallization, and the AlLi phases were broken and distributed along the extrusion direction during the extrusion process. The AlLi phase disappeared when the Y content increased to 2.0wt%. The highest tensile strength of the alloy reaches 326.3MPa after extrusion. Fine grain strengthening and secondary phase strengthening are the two dominant factors for improving the ultimate strength of the alloy. The effect of secondary phase strengthening is determined by the content, size and distribution of Al2Y
引用
下载
收藏
页码:89 / 93
页数:5
相关论文
共 21 条
  • [11] Sviderskaya Z.A., 1968, IZVESTIYA AKAD NAUK, V6, P183
  • [12] Wang T, 2006, J RARE EARTH, V24, P797
  • [13] Effects of Ce-rich RE additions and heat treatment on the microstructure and tensile properties of Mg-Li-Al-Zn-based alloy
    Wu, Libin
    Cui, Chongliang
    Wu, Ruizhi
    Li, Jiqing
    Zhan, Haibo
    Zhang, Milin
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (4-5): : 2174 - 2179
  • [14] Effects of the addition of Y in Mg-8Li-(1,3)Al alloy
    Wu, Ruizhi
    Qu, Zhikun
    Zhang, Milin
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 516 (1-2): : 96 - 99
  • [15] Wu Ruizhi, 2007, T NONFERROUS METALS, VS1, P376
  • [16] Yang Hongge, 2005, MAT REV, V19, P61
  • [17] Yu H., 1996, RARE MET MAT ENG, V25, P1
  • [18] Zhai Chunquan, 2006, ACTA METALLURGICA SI, P41
  • [19] Zhang, 2009, FOUNDRY TECHNOLOGY, V30, P116
  • [20] [张景怀 Zhang Jinghuai], 2008, [稀有金属, Chinese Journal of Rare Metals], V32, P659