Microstructure and Mechanical Properties of As-extruded Mg-5Li-3Al-2Zn-xY Alloy

被引:0
|
作者
Cui Chongliang [1 ]
Liu Xuhe [1 ]
Wu Libin [1 ]
Wu Ruizhi [1 ]
Zhang Minlin [1 ]
Qu Zhikun [1 ,2 ]
Zhu Jiajun [2 ]
Wang Chunfeng [2 ]
机构
[1] Harbin Engn Univ, Key Lab Superlight Mat & Surface Technol, Minist Educ, Harbin 150001, Peoples R China
[2] Harbin Normal Univ, Harbin 150025, Peoples R China
关键词
extrusion deformation; magnesium-lithium alloy; yttrium;
D O I
暂无
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The microstructure and mechanical properties of as-extruded Mg-5Li-3Al-2Zn-xY alloy were investigated by optical microscope, scanning electron microscope, and X-ray diffraction. The results show that the grains of the alloy were refined due to the dynamic recrystallization, and the AlLi phases were broken and distributed along the extrusion direction during the extrusion process. The AlLi phase disappeared when the Y content increased to 2.0wt%. The highest tensile strength of the alloy reaches 326.3MPa after extrusion. Fine grain strengthening and secondary phase strengthening are the two dominant factors for improving the ultimate strength of the alloy. The effect of secondary phase strengthening is determined by the content, size and distribution of Al2Y
引用
收藏
页码:89 / 93
页数:5
相关论文
共 21 条
  • [1] Cai Xun, 2000, FUNDAMENTALS MAT SCI, P31
  • [2] Deng Lei, 2006, J UNIV SCI TECHNOL B, V28, P502
  • [3] DING W J, 2007, Science and technology of magnesium alloys M
  • [4] Effect of Y on microstructure and mechanical properties of duplex Mg-7Li alloys
    Dong, Hanwu
    Wang, Lidong
    Wu, Yaoming
    Wang, Limin
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2010, 506 (01) : 468 - 474
  • [5] [董含武 DONG Hanwu], 2009, [兵器材料科学与工程, Ordnance Material Science and Engineering], V32, P88
  • [6] Ji Guodong, 2009, Special Casting & Nonferrous Alloys, V29, P462, DOI 10.3870/tzzz.2009.05.026
  • [7] [蒋斌 Jiang Bin], 2005, [材料导报, Materials Review], V19, P38
  • [8] Lei Fang, 1996, J MAT ENG, P3
  • [9] Niu Zhongyi, 2007, LIGHT ALLOY FABRICAT, V35, P35
  • [10] Microstructures and tensile properties of Mg-8Gd-0.6Zr-xNd-yY (x+y=3, mass%) alloys
    Peng, Qiuming
    Wang, Jianli
    Wu, Yaoming
    Wang, Limin
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 433 (1-2): : 133 - 138