Effects of altitude on the thermal efficiency of a heavy-duty diesel engine

被引:67
|
作者
Wang, Xin [1 ]
Ge, Yunshan [1 ]
Yu, Linxiao [1 ]
Feng, Xiangyu [1 ]
机构
[1] Beijing Inst Technol, Sch Mech Engn, Lab Auto Power & Emiss Test, Beijing 100081, Peoples R China
基金
中国国家自然科学基金;
关键词
Thermal efficiency; Diesel engine; High altitude; BIODIESEL; PRESSURE;
D O I
10.1016/j.energy.2013.06.050
中图分类号
O414.1 [热力学];
学科分类号
摘要
In order to investigate the effects of altitude on the brake thermal efficiency of heavy-duty diesel engines, an experimental study on a heavy-duty diesel engine operating at various altitudes was conducted. Tests were conducted in low and moderate load and speed conditions. Brake thermal efficiency at four altitudes, including 0 m, 1600 m, 3300 m and 4500 m, was tested. A mobile engine bench which was specifically designed for mobile engine test was employed. The engine was working at low and moderate speeds and loads during the tests. The results indicated that brake thermal efficiency (with unchanged SOI (Start of Injection) at various altitudes) dropped with the rising of altitude; especially for the low-speed, low-load cases. Additionally, a few reasons to lower brake thermal efficiency at high altitude were analyzed, which indicated that factors including delayed combustion start, lowered factual expansion ratio, decreased specific heat ratio of the air fuel mixture, aggravated ineffectiveness of turbocharger, deformed fuel spray and enhanced heat transfer, contributed to the deterioration of brake thermal efficiency in high altitude regions. (C) 2013 Elsevier Ltd. All rights reserved.
引用
收藏
页码:543 / 548
页数:6
相关论文
共 50 条
  • [21] Effects of high cetane diesel on combustion, performance, and emissions of heavy-duty diesel engine
    Saikia, Navarun
    Sakunthalai, Ramadhas Arumugam
    Chakradhar, Maya
    Masilamani, Sithananthan
    Maheshwari, Muhul
    Saxena, Deepak
    [J]. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH, 2023, 30 (22) : 61246 - 61256
  • [22] Effects of diesel/ethanol dual fuel on emission characteristics in a heavy-duty diesel engine
    Liu, Junheng
    Sun, Ping
    Zhang, Buyun
    [J]. 2017 2ND INTERNATIONAL SEMINAR ON ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2017, 231
  • [23] Effects of high cetane diesel on combustion, performance, and emissions of heavy-duty diesel engine
    Navarun Saikia
    Ramadhas Arumugam Sakunthalai
    Maya Chakradhar
    Sithananthan Masilamani
    Muhul Maheshwari
    Deepak Saxena
    [J]. Environmental Science and Pollution Research, 2023, 30 : 61246 - 61256
  • [24] Effects of Modified Diesel Fuels on Pollutant Emissions from a Heavy-Duty Diesel Engine
    Zhao, Zichuan
    Liu, Shuai
    Wang, Zhong
    Zhang, Qixia
    Zhang, Libin
    He, Ren
    [J]. Hsi-An Chiao Tung Ta Hsueh/Journal of Xi'an Jiaotong University, 2022, 56 (01): : 41 - 50
  • [25] Control strategies for heavy-duty diesel engine emissions
    Schihl, P
    [J]. IEEE INSTRUMENTATION & MEASUREMENT MAGAZINE, 2001, 4 (02) : 11 - 15
  • [26] Future trends of heavy-duty diesel engine lubrication
    Kelley, FA
    [J]. LUBRICATION ENGINEERING, 1996, 52 (10): : 743 - 744
  • [27] Microcharacterization of heavy-duty diesel engine piston deposits
    Smith, GC
    Hopwood, AB
    Titchener, KJ
    [J]. SURFACE AND INTERFACE ANALYSIS, 2002, 33 (03) : 259 - 268
  • [28] A Novel Combustion Control to Achieve Higher Thermal Efficiency for a Heavy-Duty Diesel Engine with High Compression Ratio
    Uchida, N.
    Watanabe, K.
    [J]. CONFERENCE ON THERMO-AND FLUID DYNAMICS OF CLEAN PROPULSION POWERPLANTS, THIESEL 2022, 2022,
  • [29] Influence of charge density and oxygen concentration on combustion paths, thermal efficiency and emissions in a heavy-duty diesel engine
    Lu, Yingying
    Pei, Yiqiang
    Wu, Binyang
    Liu, Yize
    [J]. ADVANCES IN MECHANICAL ENGINEERING, 2020, 12 (12)
  • [30] Effects of the injection parameters and compression ratio on the emissions of a heavy-duty diesel engine
    Yilmaz, Mustafa
    Koten, Hasan
    Gul, M. Zafer
    [J]. INTERNATIONAL JOURNAL OF VEHICLE DESIGN, 2012, 59 (2-3) : 147 - 163