Surface Profile Observation of PTFE Radial Bearings under Rolling-Contact-Fatigue in Water

被引:1
|
作者
Oyama, Shunsuke [1 ]
Kida, Katsuyuki [1 ]
Santos, Edson Costa [1 ]
Koike, Hitonobu [1 ]
Kashima, Yuji [2 ]
机构
[1] Kyushu Univ, Dept Mech Eng, Nishi Ku, 744 Motooka, Fukuoka 812, Japan
[2] Kashima Plast Bearings Corp, Nishiyodogawa Ku, Osaka, Japan
来源
关键词
Tribology; Rolling Contact fatigue; Polymer Bearing; PTFE; Wear; POLYMER BEARINGS; ROTATION SPEED; PEEK BEARINGS; LOAD; RACE;
D O I
10.4028/www.scientific.net/AMM.307.337
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
Groove shape effect on wear behavior in PTFE radial bearings under rolling contact fatigue (RCF) was investigated. RCF tests in water-lubricated conditions were carried out at different loads and rotation speeds. The groove surfaces after testing were observed by using a laser confocal microscope and a two-dimensional shape measurement sensor. It was found that PTFE bearings under RCF generate wear debris, however no cracking or flaking failure could be observed. It is concluded that groove deformation depend on load rather than rotation speed. The biggest changes in groove profiles occurred when tested at loads close to 400N.
引用
收藏
页码:337 / +
页数:2
相关论文
共 50 条