Bond strengthening of lap spliced reinforcement using external FRP jackets: An effective technique for seismic retrofit of rectangular or circular RC columns

被引:26
|
作者
Harajli, Mohamed H. [1 ]
机构
[1] Amer Univ Beirut, Dept Civil & Environm Engn, Beirut, Lebanon
关键词
Bond strength; Cyclic load; Fiber reinforced polymer; Slip; Seismic retrofit; STEEL BARS; CONFINEMENT; POLYMER;
D O I
10.1016/j.conbuildmat.2008.07.028
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
Confinement of concrete at the critical hinging regions is one of the most effective means for improving the seismic behavior of reinforced concrete (RC) members. Confinement reduces the bond degradation of the steel reinforcement and limits the concrete damage within the confined zone leading to increased energy absorption and dissipation capacity of the structure. Recent experimental and analytical studies undertaken on the use of FRP composites for seismic upgrading of RC members [FRPRCSO8 Proceedings. In: Triantafillou TC, editor. 8th International symposium on fiber-reinforced polymer reinforcement for concrete structures. Patrace, Greece: University of Patrace; July 2007. p. 16-8] have clearly identified the advantages of this technology when compared to conventional strengthening methods. However, unfortunately, no guidelines have yet been developed by code committees for seismic retrofit using FRP composites. This paper provides a synthesis of the results of a series of experimental and analytical studies undertaken in the main part by the writer and in part by other investigators on the use of external FRP jackets for bond strengthening of developed/spliced steel bars in tension and its implications on the static and seismic response of concrete members. Results of the experimental programs are briefly discussed, and design expressions for evaluating the minimum thickness of FRP jacket required for seismic bond strengthening are presented and compared. The accuracy of the design expressions was verified against experimental data. In addition, a generalized model of the local bond stress-slip response of steel bars embedded in FRP confined concrete corresponding to splitting mode of bond failure is described. The model is composed of a monotonic envelope curve and bond degrading curve and can be used for evaluating the seismic behavior of the hinging zones in reinforced concrete members when confined externally with FRP jackets in comparison with the response of unconfined concrete. (C) 2008 Elsevier Ltd. All rights reserved.
引用
收藏
页码:1265 / 1278
页数:14
相关论文
共 38 条
  • [21] Seismic Retrofit of Rectangular RC Bridge Columns Using Wire Mesh Wrap Casing
    Kim, Sung-Hoon
    Kim, Dae-Kon
    KSCE JOURNAL OF CIVIL ENGINEERING, 2011, 15 (07) : 1227 - 1236
  • [22] Seismic retrofit of rectangular RC bridge columns using wire mesh wrap casing
    Sung-Hoon Kim
    Dae-Kon Kim
    KSCE Journal of Civil Engineering, 2011, 15 : 1227 - 1236
  • [23] Models for FRP-wrapped rectangular RC columns with continuous or lap-spliced bars under cyclic lateral loading
    Biskinis, Dionysis
    Fardis, Michael N.
    ENGINEERING STRUCTURES, 2013, 57 : 199 - 212
  • [24] Seismic retrofit of circular RC columns through using tensioned GFRP wires winding
    Choi, Eunsoo
    Cho, Baik-Soon
    Lee, Sol
    COMPOSITES PART B-ENGINEERING, 2015, 83 : 216 - 225
  • [25] Seismic design criteria for circular lap-spliced reinforced concrete bridge columns retrofitted with fiber-reinforced polymer jackets
    Elsanadedy, HM
    Haroun, MA
    ACI STRUCTURAL JOURNAL, 2005, 102 (03) : 354 - 362
  • [26] Experimental evaluation of seismic performance of corroded precast RC bridge columns and the retrofit measure using CFRP jackets
    Wang, Xu
    Wu, Suiwen
    Jia, Junfeng
    Li, Huaqiang
    Wei, Yanjian
    Zhang, Kaidi
    Bai, Yulei
    ENGINEERING STRUCTURES, 2021, 245
  • [27] Textile-Reinforced Mortar versus FRP Jacketing in Seismic Retrofitting of RC Columns with Continuous or Lap-Spliced Deformed Bars
    Bournas, D. A.
    Triantafillou, T. C.
    Zygouris, K.
    Stavropoulos, F.
    JOURNAL OF COMPOSITES FOR CONSTRUCTION, 2009, 13 (05) : 360 - 371
  • [28] Improving seismic performance of old-type RC frames using NSM technique and FRP jackets
    Seifi, Ali
    Hosseini, Abdollah
    Marefat, Mohammad Sadegh
    Zareian, Mohammad Sajjad
    ENGINEERING STRUCTURES, 2017, 147 : 705 - 723
  • [29] An Innovative Technique for the Strengthening of RC Columns and Their Connections with Beams Using C-FRP ROPES
    Karayannis, Chris
    Golias, Emmanuil
    Applied Sciences (Switzerland), 2024, 14 (18):
  • [30] Models of the flexure-controlled strength, stiffness and cyclic deformation capacity of rectangular RC columns with smooth bars, including lap-splicing and FRP jackets
    Sofia Grammatikou
    Michael N. Fardis
    Dionysis Biskinis
    Bulletin of Earthquake Engineering, 2018, 16 : 341 - 375