Study of joining performance of dissimilar Mg alloys in friction stir welding

被引：16

作者：

Kumar Singh, Umesh ^{[1
]}

Kumar Dubey, Avanish ^{[1
]}

机构：

[1] MNNIT Allahabad, Dept Mech Engn, Prayagraj, India

来源：

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE | 2021年 / 235卷 / 18期

关键词：

Friction stir welding; crown zone; magnesium alloys; microhardness; tensile strength; microstructure; MECHANICAL-PROPERTIES; TENSILE PROPERTIES; MICROSTRUCTURE; AZ31B; SHEETS; JOINTS;

D O I：

10.1177/0954406220959096

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

AZ91 and AZ31 Mg alloys are used for lightweight structures with excellent specific strength. Fusion welding of Mg alloys is not suitable due to its high affinity towards oxygen. The present research investigates joining performance of AZ91 and AZ31 using indigenously developed friction stir welding set-up at different welding and rotational speed. The results show that highest value of microhardness within the welded zone was 95.92 Hv on the advancing (AZ91) side. The maximum tensile strength of the welded sample was 85.09% of AZ31. In all the cases, samples broke from the advancing side near the weld centre line.

引用

页码：3554 / 3562

页数：9

共 50 条

[21] Joining Dissimilar Mg/Al Alloys by Solid-State Friction Spot Welding
Peng Chai
Kang Yang
Shude Ji
XinXin Ai
Zan Lv
Qi Song
[J]. JOM, 2019, 71 : 1760 - 1767
[22] A Survey on Friction Stir Welding Of Dissimilar Magnesium Alloys
Unnikrishnan, M. A.
Dhas, Edwin Raja J.
[J]. 1ST INTERNATIONAL CONFERENCE ON RECENT ADVANCES IN AEROSPACE ENGINEERING (ICRAAE-2017), 2017, 247
[23] FRICTION STIR SPOT WELDING OF DISSIMILAR ALUMINIUM ALLOYS
Bozkurt, Yahya
[J]. COMPTES RENDUS DE L ACADEMIE BULGARE DES SCIENCES, 2016, 69 (06): : 785 - 792
[24] Welding of dissimilar Mg alloys using indigenously developed friction stir welding set-up
Singh, Umesh Kumar
Dubey, Avanish Kumar
[J]. MATERIALS TODAY-PROCEEDINGS, 2021, 44 : 975 - 978
[25] A Study on Dissimilar Friction Stir Welds Between Al and Mg Alloys
Zettler, R.
Dos Santos, J. F.
Blanco, A.
da Silva, A.
[J]. TRENDS IN WELDING RESEARCH, PROCEEDINGS, 2006, : 413 - 419
[26] Friction Stir Welding of Mg and Al Alloys
Kupec, Tomas
Hlavacova, Ivana
Turna, Milan
[J]. MATERIALS RESEARCH AND APPLICATIONS, PTS 1-3, 2014, 875-877 : 1477 - +
[27] JOINING OF AA2014 AND AA5059 DISSIMILAR ALUMINIUM ALLOYS BY FRICTION STIR WELDING
Saleh, Abass Ali
[J]. STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA, 2020, 20 (02): : 99 - 102
[28] A Review on Dissimilar Friction Stir Welding of Aluminum Alloys to Titanium Alloys
Jain, Surya
Bhuva, Krishna
Patel, Palak
Badheka, Vishvesh J.
[J]. INNOVATIONS IN INFRASTRUCTURE, 2019, 757 : 415 - 425
[29] Friction Stir Lap Welding of Mg/Ti Dissimilar Alloys Using a Slight Penetration Depth
Ji, Shude
Hu, Wei
Ma, Zhongwei
Li, Qinghua
Gong, Xue
[J]. JOM, 2020, 72 (04) : 1589 - 1596
[30] Friction Stir Lap Welding of Mg/Ti Dissimilar Alloys Using a Slight Penetration Depth
Shude Ji
Wei Hu
Zhongwei Ma
Qinghua Li
Xue Gong
[J]. JOM, 2020, 72 : 1589 - 1596

← 1 2 3 4 5 →