Influence of Al content and pre-oxidation on the aqueous corrosion resistance of binary Fe-Al alloys in sulphuric acid

被引:34
|
作者
Peng, Jian [1 ]
Moszner, Frank [2 ]
Rechmann, Julian [1 ]
Vogel, Dirk [1 ]
Palm, Martin [1 ]
Rohwerder, Michael [1 ]
机构
[1] Max Planck Inst Eisenforsch GmbH, Max Planck Str 1, D-40237 Dusseldorf, Germany
[2] Winterthur Gas & Diesel Ltd, Schutzenstr 1-3, CH-8401 Winterthur, Switzerland
关键词
Fe-Al alloys; Aqueous corrosion resistance; Pre-oxidation; Sulphuric acid; SURFACE ANALYTICAL INVESTIGATIONS; AISI-316; STAINLESS-STEELS; IRON-ALUMINUM ALLOYS; INTERMETALLIC COMPOUND; PASSIVE LAYERS; BETA-FEAL; PURE IRON; BEHAVIOR; H2SO4; ADDITIONS;
D O I
10.1016/j.corsci.2018.12.040
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The influence of Al content and pre-oxidation on the corrosion behavior of binary Fe-Al alloys in 0.0126 M H2SO4 was investigated. The minimum Al content for forming a passive film on binary Fe-Al at 25 degrees C is 15 at.% and passivation improves up to 25 at.% Al. X-ray photoelectron spectroscopy measurements show that the passive film on Fe-25Al is enriched in Al and consists of an outer layer of mixed Al and Fe hydroxides and an inner layer of Al oxide. The oxide layer generated at 1000 degrees C effectively protected against aqueous corrosion in H2SO4.
引用
收藏
页码:123 / 132
页数:10
相关论文
共 50 条
  • [21] AES study of the initial oxidation of Fe-Al alloys
    Hong, Jae-Hwa
    Jeong, Jae-In
    Kang, Jeongsoo
    Lee, Young-Pak
    Shin, Hyun-Joon
    Proceedings of the Asia Pacific Physics Conference, 1991,
  • [22] High-temperature corrosion resistance of intermetallic alloys from Fe-Al system
    Formanek, Boleslaw
    Szczucka-Lasota, Bozena
    OCHRONA PRZED KOROZJA, 2009, 52 (12): : 583 - 588
  • [23] Effect of pre-oxidation on increasing resistance of Fe-Al-Ni-Cr-Co-Mn high entropy alloys to molten Al attack
    Yang, H. H.
    Tsai, W. T.
    Kuo, J. C.
    CORROSION ENGINEERING SCIENCE AND TECHNOLOGY, 2014, 49 (02) : 124 - 129
  • [24] Investigation on the corrosion of Fe-Al alloys and the delamination of polymer coatings
    Dannenfeldt, M
    Stratmann, M
    PROCEEDINGS OF THE SYMPOSIUM ON PASSIVITY AND ITS BREAKDOWN, 1998, 97 (26): : 473 - 484
  • [25] Creep of binary Fe-Al alloys with ultrafine lamellar microstructures
    Schmitt, A.
    Kumar, K. S.
    Kauffmann, A.
    Li, X.
    Stein, F.
    Heilmaier, M.
    INTERMETALLICS, 2017, 90 : 180 - 187
  • [26] Initial Oxidation of Fe-Al and Fe-Cr-Al Alloys: Cr as an Alumina Booster
    Heinonen, M. H.
    Kokko, K.
    Punkkinen, M. P. J.
    Nurmi, E.
    Kollar, J.
    Vitos, L.
    OXIDATION OF METALS, 2011, 76 (3-4): : 331 - 346
  • [27] Corrosion Resistance of Al–Cu–Со, Al–Ni–Со, and Al–Ni–Fe Quasicrystalline Alloys in Acid Solutions
    О. V. Sukhova
    V. А. Polonskyy
    Materials Science, 2022, 58 : 67 - 74
  • [28] Wrinkling behavior of alumina scales formed during isothermal oxidation of Fe-Al binary alloys
    Yang, ZG
    Hou, PY
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2005, 391 (1-2): : 1 - 9
  • [29] THE EFFECT OF PRE-OXIDATION AND THERMAL CYCLING ON THE CORROSION BEHAVIOR OF FE-CR-AL-BASED ALLOYS IN A COAL GASIFIER ATMOSPHERE
    SIDKY, PS
    HOCKING, MG
    CORROSION SCIENCE, 1989, 29 (06) : 735 - &
  • [30] The effect of aluminum content on the corrosion behavior of Fe-Al alloys in reducing environments at 700°C
    Banovic, SW
    DuPont, JN
    Marder, AR
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2000, 31 (07): : 1805 - 1817