Experimental Study on Damage Deterioration and Tensile Characteristics of Rock under Freeze-thaw Environment

被引:8
|
作者
Zhang, Huimei [1 ]
Yang, Gengshe [2 ]
Liang, Yuan
机构
[1] Xian Univ Sci & Technol, Dept Mech, Xian 710054, Shaanxi, Peoples R China
[2] Xian Univ Sci & Technol, Coll Architecture & Civil Engn, Xian 710054, Shaanxi, Peoples R China
基金
中国国家自然科学基金;
关键词
Environmental geotechnical engineering; Lithology; Freeze-thaw cycle; Damage deterioration; Anti-tensile characteristics;
D O I
10.4028/www.scientific.net/AMR.518-523.1749
中图分类号
O6 [化学];
学科分类号
0703 ;
摘要
The basic mechanical problem facing of environmental geotechnical engineering in cold regions is the physical and mechanical properties of rocks under freeze-thaw conditions. The freeze-thaw cycling experiment was conducted first for two types of rock which are red sandstone and shale, then the splitting tensile experiment on different freeze-thaw cycles. The damage deterioration and breaking behavior under freeze-thaw conditions was investigated, and the influence of lithology and freeze-thaw cycle on anti-tensile characteristics of rock was studied. It is shown that three freeze-thaw damage deterioration modes of two kinds of rock are spalling mode, fracture mode and crack mode. The freeze-thaw cycle leads to irreversible deterioration on physical and mechanical properties for rock, but the damage of red sandstone is more serious than that of shale by the number of freeze-thaw cycles. The regularity of freeze-thaw effects of compression and tensile characteristics for two rocks are identical, but the tensile characteristic is more sensitive to freeze-thaw cycle.
引用
收藏
页码:1749 / +
页数:2
相关论文
共 50 条
  • [31] Water Absorption and Microstructure Deterioration of Cement Paste Under Freeze-Thaw Environment
    Li H.
    Liu L.
    Wei Y.
    Kuei Suan Jen Hsueh Pao/Journal of the Chinese Ceramic Society, 2023, 51 (05): : 1302 - 1310
  • [32] Stability deterioration model of toppling unstable rock mass under freeze-thaw cycle
    Shu J.-J.
    Deng Z.-D.
    Wu B.-N.
    Guan H.-D.
    Cao M.-S.
    Zhejiang Daxue Xuebao (Gongxue Ban)/Journal of Zhejiang University (Engineering Science), 2022, 56 (09): : 1714 - 1723
  • [33] Experimental Study of the Pore Structure Deterioration of Sandstones under Freeze-Thaw Cycles and Chemical Erosion
    Li, Jielin
    Kaunda, Rennie B.
    Zhu, Longyin
    Zhou, Keping
    Gao, Feng
    ADVANCES IN CIVIL ENGINEERING, 2019, 2019
  • [34] Experimental Study on Mechanical Properties and Pore Structure Deterioration of Concrete under Freeze-Thaw Cycles
    Zhang, Kai
    Zhou, Jing
    Yin, Zhigang
    MATERIALS, 2021, 14 (21)
  • [35] A Study on the Freeze-Thaw Damage and Deterioration Mechanism of Slope Rock Mass Based on Model Testing and Numerical Simulation
    Zhu, Jiebing
    Xu, Dongdong
    Wang, Bin
    Li, Cong
    APPLIED SCIENCES-BASEL, 2022, 12 (13):
  • [36] Study on damage characteristics and influence scope of coal-rock saturated with freeze-thaw water
    Liu, Jian
    Wang, Laigui
    Li, Hewan
    Ren, Tianjiao
    BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT, 2024, 83 (04)
  • [37] Experimental Investigation of the Influence of Freeze-Thaw Mode on Damage Characteristics of Sandstone
    Peng, Ningbo
    Hong, Jie
    Zhu, Ye
    Dong, Yun
    Sun, Bo
    Huang, Jizhong
    APPLIED SCIENCES-BASEL, 2022, 12 (23):
  • [38] Macro-meso physical and mechanical deterioration properties and damage prediction model of rock under Freeze-thaw cycles
    Meng, Xiangzhen
    Zhang, Huimei
    Yuan, Chao
    Li, Yugen
    Chen, Shiguan
    Chen, Junfei
    BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT, 2024, 83 (11)
  • [39] Study on the Influence of Saturation on Freeze-Thaw Damage Characteristics of Sandstone
    Zhang, Xinlei
    Jin, Jiaxu
    Liu, Xiaoli
    Wang, Yukai
    Li, Yahao
    MATERIALS, 2023, 16 (06)
  • [40] Research on damage model of rock under coupling action of freeze-thaw and load
    Zhang, Huimei
    Yang, Gengshe
    Yanshilixue Yu Gongcheng Xuebao/Chinese Journal of Rock Mechanics and Engineering, 2010, 29 (03): : 471 - 476