A Novel Heat Treatment for Excavator Dipper Teeth Manufactured from Low-Carbon Low-Alloy Steel

被引：10

作者：

Zhao, Ming-Chun ^{[1
]}

Li, Jing-Li ^{[1
]}

Zhao, Ying-Chao ^{[1
]}

Huang, Xiao-Fang ^{[1
]}

Li, Jin-Zhu ^{[1
]}

Atrens, Andrej ^{[2
]}

机构：

[1] Cent S Univ, Sch Mat Sci & Engn, Changsha 410083, Peoples R China

[2] Univ Queensland, Div Mat, Brisbane, Qld 4072, Australia

来源：

STEEL RESEARCH INTERNATIONAL | 2013年 / 84卷 / 01期

关键词：

1; forging; annealing; remnant-heat; 3; steel; 4. mechanical properties; COOLING RATE; MANGANESE; DEFORMATION; MARTENSITE;

D O I：

10.1002/srin.201200103

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

This research examined the metallurgy of production of forged excavator teeth manufactured from low-carbon low alloy steel. A novel partial forging-remnant-heat hardening technology was proposed. The critical temperature of isothermal annealing for 40 Cr steel was determined experimentally to be 650 degrees C. Production dipper teeth were produced using this novel technology. Their properties were compared with dipper teeth produced by the alternative routes. The novel technology provided optimum microstructure, good mechanical properties, and a lower economical cost, congruent with the low carbon economy.

引用

页码：89 / 93

页数：5

共 50 条

[11] LATER STAGE OF REVERSE TRANSFORMATION IN LOW-CARBON LOW-ALLOY STEEL
MATSUDA, S
OKAMURA, Y
TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1974, 14 (06) : 444 - 449
[12] New insights into intragranular ferrite in a low-carbon low-alloy steel
Cheng, L.
Wu, K. M.
ACTA MATERIALIA, 2009, 57 (13) : 3754 - 3762
[13] PROPERTIES OF LOW-CARBON, LOW-ALLOY STEEL HARDENED TO 590 MPA
MARCHENKO, VA
RUDCHENKO, AV
KARCHEVSKAYA, NI
STEEL IN THE USSR, 1982, 12 (01): : 26 - 28
[14] Hypoeutectoid and Pearlite Ferrite Aggregates in Low-Carbon, Low-Alloy Steel
M. M. Kantor
K. G. Vorkachev
V. I. Chelpanov
K. A. Solntsev
Inorganic Materials, 2020, 56 : 1314 - 1318
[15] Formation of Mesoferrite and Granular Bainite in Low-Carbon Low-Alloy Steel
V. V. Svishchenko
D. P. Cheprasov
O. V. Antonyuk
Metal Science and Heat Treatment, 2004, 46 : 324 - 328
[16] Producing Nanobainite on Carburized Surface of a Low-Carbon Low-Alloy Steel
Avishan, Behzad
Talebi, Peyman
Tekeli, Suleyman
Yazdani, Sasan
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2023, 32 (01) : 211 - 220
[17] Rapid Induction Heat Treatment of Articles from Plain and Low-Alloy Low-Carbon and Medium-Carbon Steels
N. V. Zimin
O. S. Martynov
Metal Science and Heat Treatment, 2005, 47 : 235 - 238
[18] Rapid induction heat treatment of articles from plain and low-alloy low-carbon and medium-carbon steels
Zimin, NV
Martynov, OS
METAL SCIENCE AND HEAT TREATMENT, 2005, 47 (5-6) : 235 - 238
[19] HEAT AND THERMOMECHANICAL TREATMENT OF ROLLED PRODUCTS OF CARBON AND LOW-ALLOY STEEL
BERNSHTEIN, ML
EFIMENKO, SP
STEEL IN THE USSR, 1985, 15 (01): : 33 - 36
[20] FRACTOGRAPHY OF LOW-CARBON AND LOW-ALLOY STEELS
GEORGIEV, MN
GORITSKII, VM
STROK, LP
KHROMOV, DP
RUSSIAN METALLURGY, 1986, (03): : 154 - 157

← 1 2 3 4 5 →