Wafer-bonded single-crystal silicon slot waveguides and ring resonators

We fabricated horizontal Si slot waveguides with a 25 nm SiO(2) slot layer by bonding thin Si-on-insulator wafers. After removing the Si substrate and buried oxide from one side of the bonded structure, grating-coupled waveguides and ring resonators were partially etched into the Si/SiO(2)/Si device layers. The gratings exhibit efficiencies of up to 23% at 1550 nm and the ring resonators were measured to have loaded quality factors near 42 000 for the lowest-order transverse-electric mode, corresponding to a propagation loss of 15 dB/cm. The leaky lowest-order transverse-magnetic mode was also observed with a propagation loss of 44 dB/cm.