Wear and micropitting of steel ball sliding against TiN coated steel plate in dry and lubricated conditions

被引:9
|
作者
Iliuc, I [1 ]
机构
[1] Inst Solid Mech, Bucharest, Romania
关键词
wear; micropitting; TiN; steel;
D O I
10.1016/j.triboint.2005.04.002
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
Wear of the steel part sliding against titanium nitride both in lubricated and unlubricated conditions have been investigated. An unexpected micropitting like wear on the steel surface was found in lubricated conditions, after very short run time. Possible wear mechanisms-fatigue, chemical reaction or electrical discharge-are discussed. A special attention is given to electrical discharge mechanism. A remarkable result was obtained when the lubricant, white oil-a good insulator fluid-was replaced with glycerin, an electrical conductive fluid. With glycerin as lubricant no micropitting was observed on the steel surface even after long run time. In unlubricated condition intense, predominant oxidative wear of steel part was found. (c) 2005 Elsevier Ltd. All rights reserved.
引用
收藏
页码:607 / 615
页数:9
相关论文
共 50 条
  • [31] WEAR MECHANISM OF TIN-COATED HIGH-SPEED STEEL DURING SLIDING
    YOON, KJ
    CHO, SJ
    KIM, SS
    YOON, MS
    YANG, SH
    WEAR, 1993, 170 (01) : 101 - 108
  • [32] Sliding friction and wear behaviour of ion nitrided and TiN coated AISI 4140 steel
    Daniel Mandri, Alejo
    Alejandro Colombo, Diego
    Patricia Bruhl, Sonia
    Cesar Dommarco, Ricardo
    TRIBOLOGY-MATERIALS SURFACES & INTERFACES, 2022, 16 (04) : 373 - 383
  • [33] Wear maps of borided AISI 316L steel under ball-on-flat dry sliding conditions
    García-León, R.A.
    Martínez-Trinidad, J.
    Campos-Silva, I.
    Figueroa-López, U.
    Guevara-Morales, A.
    Materials Letters, 2021, 282
  • [34] Pressure and thermally induced stages of wear in dry sliding of a steel ball against an aluminium-silicon alloy flat
    Mahato, Anirban
    Perry, Thomas A.
    Jayaram, Vikram
    Biswas, S. K.
    WEAR, 2010, 268 (9-10) : 1080 - 1090
  • [35] Wear maps of borided AISI 316L steel under ball-on-flat dry sliding conditions
    Garcia-Leon, R. A.
    Martinez-Trinidad, J.
    Campos-Silva, I
    Figueroa-Lopez, U.
    Guevara-Morales, A.
    MATERIALS LETTERS, 2021, 282
  • [36] WEAR AND FRICTION OF PBT-BASED MATERIAL IN DRY SLIDING AGAINST STEEL
    Georgescu, Constantin
    Deleanu, Lorena
    ICEM15: 15TH INTERNATIONAL CONFERENCE ON EXPERIMENTAL MECHANICS, 2012,
  • [37] Dry sliding wear behaviour of medium carbon steel against an alumina disk
    Kumar, Shiv
    Bhattacharyya, Ashish
    Mondal, Dipak Kumar
    Biswas, Koushik
    Maity, Joydeep
    WEAR, 2011, 270 (5-6) : 413 - 421
  • [38] Dry sliding wear characteristics of some industrial polymers against steel counterface
    Unal, H
    Sen, U
    Mimaroglu, A
    TRIBOLOGY INTERNATIONAL, 2004, 37 (09) : 727 - 732
  • [39] Friction and wear characteristics of steel on rock under water and oil based lubricated sliding conditions
    Taghipour, A.
    Ytrehus, J. D.
    Lund, B.
    Skalle, P.
    Lund, M.
    Prakash, B.
    TRIBOLOGY-MATERIALS SURFACES & INTERFACES, 2015, 9 (02) : 85 - 91
  • [40] The Tribological Behavior of TiN/TiC CVD Coatings under Dry Sliding Conditions against Zirconia and Steel Counterparts
    Jakab, Miklos
    Ali, Osamah Ihsan
    Gyurika, Istvan Gabor
    Korim, Tamas
    Telegdi, Judit
    COATINGS, 2023, 13 (05)