Molding Process and Development of Large Carbon Fiber of Fan Blades with Composite Properties of Materials

被引：1
|
作者：
Wang, Juan [2 ]
Lai, Siyu
Li, Fanxiao [1 ,3 ]
机构：
[1] North Sichuan Med Coll, Dept Med Imaging, Nanchong, Peoples R China
[2] North Sichuan Med Coll, Dept Med Imaging, Nanchong, Peoples R China
[3] Dazhou Coal Chem Ind Grp, DaZhou, Peoples R China
来源：
ADVANCED RESEARCH ON ENVIRONMENTAL SCIENCE AND MATERIAL APPLICATION | 2012年 / 600卷
关键词：
carbon fiber reinforced polymer (CFRP); reinforced materials; Flex molding process; wind turbine blades; resin transfer molding (RTM);
D O I：
10.4028/www.scientific.net/AMR.600.157
中图分类号：
X [环境科学、安全科学];
学科分类号：
08 ; 0830 ;
摘要：
The fiber reinforced materials, substrates, structural core materials, adhesives and auxiliary materials of wind turbine blade are discussed in this article. And the resin transfer molding (RTM) forming process, molding process and the latest Flex molding process are mainly summarized as well in the development of carbon fiber reinforced polymer (CFRP) application. Finally, the application and development of CFRP are analyzed in wind power field by combining research status of wind power both at home and abroad.
引用
收藏
页码：157 / +
页数：2
相关论文
共 50 条
  • [41] Application and Research on Carbon Fiber Composite Materials
    Huang Yiqiang
    Li Yunfang
    PROCEEDINGS OF THE 2015 INTERNATIONAL CONFERENCE ON MECHATRONICS, ELECTRONIC, INDUSTRIAL AND CONTROL ENGINEERING, 2015, 8 : 1619 - 1622
  • [42] Heat conduction of carbon fiber composite materials
    Shen, Rongying
    Cailiao Gongcheng/Journal of Materials Engineering, 1993, (03): : 4 - 5
  • [43] Preparation and forming properties of carbon fiber/epoxy composite laminates by rolling process
    Wang J.
    Zhang L.
    Qin H.
    Zhu W.
    Yu Y.
    Wang, Jian (xiaojianwj0729@163.com), 2018, Beijing University of Aeronautics and Astronautics (BUAA) (35): : 2601 - 2611
  • [44] Effect of process conditions on properties of activated carbon fiber composite molecular sieves
    Zhou, Ying
    Qiu, Jie-Shan
    Zhu, Sheng-Wei
    Wang, Hong-Yang
    Chen, Hui-Long
    Dalian Ligong Daxue Xuebao/Journal of Dalian University of Technology, 2001, 41 (04): : 431 - 435
  • [45] TENSILE PROPERTIES OF GLASS FIBER/ CARBON FIBER REINFORCED POLYPROPYLENE HYBRID COMPOSITES FABRICATED BY DIRECT FIBER FEEDING INJECTION MOLDING PROCESS
    Yan, Xiaofei
    Uawongsuwan, Putinun
    Murakami, Masuo
    Imajo, Akihiko
    Yang, Yuqiu
    Hamada, Hiroyuki
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2016, VOL. 2, 2016,
  • [46] Study of molding structures and physicomechanical properties of carbon-ceramic composite materials of the SiC–C system
    S. A. Kolesnikov
    V. V. Konokotin
    G. A. Kravetskii
    Refractories and Industrial Ceramics, 2009, 50 : 276 - 281
  • [47] A macroscopic model of the compaction process during compression molding of carbon fiber sheet molding compounds
    Doppelbauer, Leonhard K.
    Rienesl, Konrad
    Stelzer, Philipp S.
    Zulueta, Kepa
    Chang, Li-Yang
    Major, Zoltan
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2023, 169
  • [48] Thermally-expandable elastomer molding process for thermoset composite materials
    Kim, Dong Ouk
    Keum, Sung Woo
    Lee, Jun Ho
    Lee, Jong Hoon
    Nam, Jae-Do
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2006, 37 (11) : 2121 - 2127
  • [49] Development of carbon composite bike fork using finite element analysis and a new pressure molding process
    Hyunchul Ahn
    Jin-Sung Chon
    Nam-Kyoung Woo
    Jae-Gwan Kim
    Woong-Ryeol Yu
    Fibers and Polymers, 2014, 15 : 1517 - 1522
  • [50] Development of Carbon Composite Bike Fork Using Finite Element Analysis and a New Pressure Molding Process
    Ahn, Hyunchul
    Chon, Jin-Sung
    Woo, Nam-Kyoung
    Kim, Jae-Gwan
    Yu, Woong-Ryeol
    FIBERS AND POLYMERS, 2014, 15 (07) : 1517 - 1522
12345