The compulsively short circuiting transfer phenomenon study in rotational arc MAG welding

被引：1
|
作者：
Gao, Yanfeng [1 ]
Xiao, Jianhua [1 ]
机构：
[1] NanChang HangKong Univ, Nanchang 330063, Peoples R China
来源：
ADVANCES IN MATERIALS AND MATERIALS PROCESSING, PTS 1-3 | 2013年 / 652-654卷
关键词：
Compulsively short circuiting transfer; rotational arc; arc sensor;
D O I：
10.4028/www.scientific.net/AMR.652-654.2311
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The present paper describes the compulsively short circuiting transfer phenomenon of welding current in rotational arc MAG welding. Based on a previously reported model of spray transfer welding, a mathematical model of the short circuiting transfer of rotational arc welding is proposed. A series of welding experiments had been conducted and it's results show that short circuiting transfer would take place when the welding gun electrode rotating to the sides of V groove. The relationship between the short circuiting transfer frequency and the arc rotational frequency also had been studied.
引用
收藏
页码：2311 / 2314
页数：4
相关论文
共 50 条
  • [41] Adaptivity of arc spectrum in sensoring droplet transfer of MIG/MAG welding
    Liu, Gang
    Li, Junyue
    Li, Huan
    Han, Guoming
    [J]. Jixie Gongcheng Xuebao/Chinese Journal of Mechanical Engineering, 2000, 36 (10): : 50 - 53
  • [42] CAUSES OF SPATTER LOSS IN WELDING WITH SHORT CIRCUITING CO2-SHIELDED ARC
    POPKOV, AM
    [J]. WELDING PRODUCTION, 1971, 18 (05): : 20 - &
  • [43] Observation of weld pool profiles in short-circuiting gas metal arc welding
    Wu, C. S.
    Gao, J. Q.
    Wang, D. M.
    [J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2011, 225 (B10) : 1873 - 1887
  • [44] Scientific and technological fundamentals for the development of the controlled short circuiting MIG/MAG welding process (CCC) - A review of the literature. Part 3 of 3: Principles of controlled current short circuiting MIG/MAG systems
    Welding Laboratory, Department of Mechanical Engineering, Federal University of Santa Catarina, Florianópolis, Santa Catarina, Brazil
    [J]. Weld. Int., 2009, 4 (251-260):
  • [45] Effect of laser on the welding process of short-circuiting transfer MIG welding of aluminum alloys
    Cai, Xiaoyu
    Li, Huan
    Wei, Huiliang
    Yang, Lijun
    Gao, Ying
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2014, 75 (9-12): : 1829 - 1836
  • [46] Scientific and technological fundamentals for the development of the controlled short circuiting MIG/MAG welding process (CCC) - A literature review. Part 3 of 3: Principles of the controlled current short-circuiting MIG/MAG systems
    Goncalves e Silva, Regis Henrique
    Dutra, Jair Carlos
    Gohr, Raul, Jr.
    [J]. SOLDAGEM & INSPECAO, 2008, 13 (01): : 70 - 81
  • [47] Fuzzy control of arc length for current waveform controlled short circuiting arc welding under high-speed welding condition
    Cao, Biao
    Huang, Zeng-Hao
    Zeng, Min
    Ye, Wei-Yuan
    [J]. Hanjie Xuebao/Transactions of the China Welding Institution, 2005, 26 (06): : 17 - 20
  • [48] Dynamic simulation of GMAW short circuiting transfer pool in rotating arc surfacing
    Mao Z.
    Huang T.
    Zhou S.
    [J]. Hanjie Xuebao/Transactions of the China Welding Institution, 2020, 41 (01): : 44 - 49
  • [49] Optimization of welding current waveform parameters in controlled short circuiting transfer GMAW
    Chen, Maoai
    Jiang, Yuanning
    Wu, Chuansong
    [J]. Hanjie Xuebao/Transactions of the China Welding Institution, 2014, 35 (07): : 79 - 82
  • [50] Influence of the technological conditions of welding using the MIG/MAG method on metal transfer in the welding arc
    Rykala, Janusz
    Pfeifer, Tomasz
    [J]. Welding International, 2014, 28 (12) : 931 - 940
12345