Effect of submicron SiC particle on friction and wear properties of copper matrix composites under oil-lubricated condition

被引：8

作者：

Dai, F. Z. ^{[1
]}

Lu, J. Z. ^{[1
]}

Zhang, Y. K. ^{[1
]}

Wen, D. P. ^{[1
]}

Zhang, L. ^{[1
]}

Luo, K. Y. ^{[1
]}

Xu, X. J. ^{[1
]}

Cai, L. ^{[1
]}

机构：

[1] Jiangsu Univ, Sch Mech Engn, Jingkou Dist 212013, Zhenjiang, Peoples R China

来源：

ADVANCED COMPOSITE MATERIALS | 2013年 / 22卷 / 03期

基金：

中国国家自然科学基金; 美国国家科学基金会;

关键词：

metal-matrix composite; tribophysics; wear testing; lubricated wear including scuffing; TRIBOLOGICAL BEHAVIOR; MECHANISMS;

D O I：

10.1080/09243046.2013.791240

中图分类号：

TB33 [复合材料];

学科分类号：

摘要：

Submicron SiCp/Cu composite was fabricated by means of powder metallurgy route followed by hot extrusion, and then its morphology and mechanical properties were investigated. The results showed that densification of the composite was achieved by this fabricating process when the content of submicron SiC particle was below 5 vol.%. Furthermore, the friction and wear properties of all the submicron SiCp/Cu samples were carefully investigated with lubricant of 20# machinery oil. It was found that 5 vol.% SiCp/Cu samples exhibit excellent wear properties. This phenomenon can be explained by the following fact that a new kind of tribolayer is formed, in which submicron SiC particles are well dispersed during the wear test. In addition, the wear mechanism under lubricated condition was also discussed.

引用

页码：191 / 202

页数：12

共 50 条

[21] Friction and wear properties in dry, water- and oil-lubricated DLC against alumina and DLC against steel contacts
Ronkainen, H
Varjus, S
Holmberg, K
WEAR, 1998, 222 (02) : 120 - 128
[22] Effect of rare earths surface treatment on tribological properties of carbon fibers reinforced PTFE composite under oil-lubricated condition
上官倩芡
程先华
Journal of Rare Earths, 2008, (04) : 584 - 589
[23] Effect of rare earths surface treatment on tribological properties of carbon fibers reinforced PTFE composite under oil-lubricated condition
Shangguan Qianqian
Cheng Xianhua
JOURNAL OF RARE EARTHS, 2008, 26 (04) : 584 - 589
[24] Study on the friction and wear performance of carbon fabric/phenolic composites under oil lubricated conditions
Fei, Jie
Li, He-Jun
Huang, Jian-Feng
Fu, Ye-Wei
TRIBOLOGY INTERNATIONAL, 2012, 56 : 30 - 37
[25] Effect of carbon-fibre powder on friction and wear properties of copper-matrix composites
Song, Yang
Fan, Jianglei
Wu, Shen
Liu, Jianxiu
Zhang, Chi
Li, Yuwen
MATERIALS SCIENCE AND TECHNOLOGY, 2020, 36 (01) : 92 - 99
[26] Wear behavior of as-cast ZnAl27/SiC particulate metal-matrix composites under lubricated sliding condition
Tjong, SC
Chen, F
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1997, 28 (09): : 1951 - 1955
[27] Friction properties of carbon nanotubes reinforced nitrile composites under water lubricated condition
Li Fang
Yang Xue
He Lin
Shuai Changgeng
MATERIALS AND DESIGN, PTS 1-3, 2011, 284-286 : 611 - 614
[28] Wear behavior of As-cast ZnAl27/SiC particulate metal-matrix composites under lubricated sliding condition
S. C. Tjong
F. Chen
Metallurgical and Materials Transactions A, 1997, 28 : 1951 - 1955
[29] Friction and Wear Performances of Cathodic Arc Ion Plated TiAlSiN Coating under Oil Lubricated Condition
Shen Hui
Kong Weicheng
Tang Chengjian
Li Baomin
Kong Dejun
JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION, 2017, 32 (06): : 1301 - 1305
[30] Friction and Wear Performances of Cathodic Arc Ion Plated TiAlSiN Coating under Oil Lubricated Condition
沈辉
KONG Weicheng
TANG Chengjian
LI Baomin
孔德军
Journal of Wuhan University of Technology(Materials Science), 2017, 32 (06) : 1301 - 1305

← 1 2 3 4 5 →