Microstructure and properties of laser clad TiC+NiCrBSi plus rare earth composite coatings

被引：59
|
作者：
Wang, XH [1 ]
Zhang, M
Zou, ZD
Qu, SY
机构：
[1] Shandong Univ, Sch Mat Sci & Engn, Jinan 250061, Peoples R China
[2] Shandong Univ, Sch Mech Engn, Jinan 250061, Peoples R China
来源：
SURFACE & COATINGS TECHNOLOGY | 2002年 / 161卷 / 2-3期
关键词：
nickel-based alloy; titanium carbide; microstructure; wear; laser cladding;
D O I：
10.1016/S0257-8972(02)00496-6
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
TiC particle reinforced Ni-based alloy composite coatings were clad to AISI 4140 chromium molybdenum alloy steel substrate using a laser. The microstructure and tribological behavior of coatings were studied experimentally by means of scanning electron microscopy, transmission electron microscopy and wear tests. Partial solution of TiC particles occurs in the laser melting pool during the heating stage. Twins and dislocations were observed at the interface of TiC particles and the matrix. The wear resistance was found to correlate with the load and amount of the TiC particles present in the clad layer. By adding La,03, the hardness of clad coatings was significantly increased, and the wear resistance of clad coatings was enhanced. (C) 2002 Elsevier Science B.V. All rights reserved.
引用
收藏
页码：195 / 199
页数：5
相关论文
共 50 条
  • [41] Stratification mechanism and interface characterization of (TiN), (TiC)/NiCrBSi composite coatings synthesized by laser remelting
    Liu, RX
    Lei, TQ
    Guo, LX
    SURFACE REVIEW AND LETTERS, 2004, 11 (03) : 291 - 295
  • [42] Microstructure and properties of TiC-TiB2 composite phase Ti-based rare earth laser cladding layers
    Zhang T.
    Zhang Q.
    Zhuang H.
    Li B.
    Xu Y.
    Hangkong Xuebao/Acta Aeronautica et Astronautica Sinica, 2021, 42 (07):
  • [43] Effect of power on microstructure and properties of laser cladding NiCrBSi composite coating
    Wang Kai-ming
    Fu Han-guang
    Li Yu-long
    Lei Yong-ping
    Wei Shi-zhong
    Su Zhen-qing
    TRANSACTIONS OF THE INSTITUTE OF METAL FINISHING, 2017, 95 (06): : 328 - 336
  • [44] Wear resistance of laser clad TiC reinforced FeAl intermetallic matrix composite coatings
    Chen, Y
    Wang, HM
    RARE METAL MATERIALS AND ENGINEERING, 2003, 32 (10) : 840 - 843
  • [45] Microstructure and Properties of Laser Cladded 2205 Dual -Phase Stainless Steel/TiC Composite Coatings
    Jin Ming
    He Dingyong
    Wang Zengjie
    Zhou Zheng
    Wang Guohong
    Li Xiaoxuan
    LASER & OPTOELECTRONICS PROGRESS, 2018, 55 (11)
  • [46] Microstructure and Wear Properties of Laser in-site Formation of TiBx and TiC Titanium Composite Coatings
    Liang, Jing
    Liu, Changsheng
    Chen, Suiyuan
    Ren, Cuixia
    TMS 2012 141ST ANNUAL MEETING & EXHIBITION - SUPPLEMENTAL PROCEEDINGS, VOL 1: MATERIALS PROCESSING AND INTERFACES, 2012, : 27 - 34
  • [47] Effect of laser cladding process parameters on clad quality and in-situ formed microstructure of Fe-TiC composite coatings
    Emamian, Ali
    Corbin, Stephen F.
    Khajepour, Amir
    SURFACE & COATINGS TECHNOLOGY, 2010, 205 (07): : 2007 - 2015
  • [48] Microstructure and wear resistance of NiCrBSi laser clad layer on titanium alloy
    Sun, Ronglu
    Yang, Dezhuang
    Dong, Shangli
    Guo, Lixin
    Yingyong Jiguang/Applied Laser Technology, 2000, 20 (06): : 261 - 263
  • [49] Microstructure and wear performance of laser clad surface TiC/Ti composite on Ti alloy
    Inst of Corrosion and Protection of, Metals, Chinese Acad of Sciences, Shenyang, China
    Mocaxue Xuebao, 1 (18-22):
  • [50] Influence of lanthanum on tribological properties and microstructure of laser clad B+Fe+Si composite coatings
    Cheng, XY
    Xie, XB
    Jiang, S
    JOURNAL OF RARE EARTHS, 2004, 22 (05) : 687 - 690
12345