Enhancement of fracture toughness of high-strength Cr-Ni weld metals by strain-induced martensite transformation

被引：21
|
作者：
Qiu, H. [1 ]
Wang, L. N. [1 ]
Qi, J. G. [1 ]
Zuo, H. [1 ]
Hiraoka, K. [2 ]
机构：
[1] Natl Inst Mat Sci, Res Ctr Strateg Mat, Tsukuba, Ibaraki 3050047, Japan
[2] Osaka Univ, Joining & Welding Res Inst, Suita, Osaka 565, Japan
来源：
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2013年 / 579卷
关键词：
Retained austenite; Strain-induced martensite transformation; Cr-Ni weld metal; Low temperature; ASSISTED MULTIPHASE STEELS; PHASE-TRANSFORMATION; RETAINED AUSTENITE; BRITTLE MATERIALS; CRACK; MECHANICS; ZIRCONIA; CERAMICS; FATIGUE; SILICON;
D O I：
10.1016/j.msea.2013.05.012
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The effect of strain-induced martensite transformation from retained austenite was investigated on the fracture toughness of Cr-Ni weld metal, in terms of crack tip opening displacement, within the range of room temperature to 77 K. Strain-induced martensite transformation has a positive impact on fracture toughness and can change fracture mode. This effect generally increases with an increase in the amount of retained austenite, but it is weak at 77 K. (C) 2013 Elsevier B.V. All rights reserved.
引用
收藏
页码：71 / 76
页数：6
相关论文
共 50 条
  • [41] Strain-Induced Precipitation Kinetics of Vanadium Carbonitride Precipitates with the Cubic Structure in High-Strength Weathering Steels
    J. Cheng
    J. Qing
    H. F. Shen
    [J]. Strength of Materials, 2018, 50 : 218 - 228
  • [42] EFFECT OF TEMPERING ON FRACTURE MODE IN HIGH-STRENGTH, PHOSPHORUS-DOPED NI-CR STEELS
    BRIANT, CL
    LEWIS, N
    [J]. MATERIALS SCIENCE AND TECHNOLOGY, 1986, 2 (01) : 34 - 41
  • [43] Microstructure and Mechanical Properties of Welded Joint of a Fe-Cr-Ni-Mo Steel with High-Strength and High-Toughness
    Hu Xiaofeng
    Jiang Haichang
    Zhao Mingjiu
    Yan Desheng
    Lu Shanping
    Rong Lijian
    [J]. ACTA METALLURGICA SINICA, 2018, 54 (01) : 1 - 10
  • [44] Interactions of negative strain rate sensitivity, martensite transformation, and dynamic strain aging in 3rd generation advanced high-strength steels
    Callahan, Michael
    Perlade, Astrid
    Schmitt, Jean-Hubert
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2019, 754 : 140 - 151
  • [45] EFFECT OF REVERSION TREATMENT ON STRENGTH AND DUCTILITY OF LOW C, CR-NI MARTENSITIC STAINLESS-STEEL WITH HIGH-RESISTANCE TO WELD SOFTENING
    IGAWA, T
    TAKEMOTO, T
    UEMATSU, Y
    HOSHINO, K
    [J]. TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1993, 79 (08): : 996 - 1002
  • [46] Enhancement of ballistic performance enabled by transformation-induced plasticity in high-strength bainitic steel
    Jo, Min Cheol
    Kim, Selim
    Suh, Dong Woo
    Kim, Hong Kyu
    Kim, Yong Jin
    Sohn, Seok Su
    Lee, Sunghak
    [J]. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2021, 84 : 219 - 229
  • [47] Enhancement of ballistic performance enabled by transformation-induced plasticity in high-strength bainitic steel
    Min Cheol Jo
    Selim Kim
    Dong Woo Suh
    Hong Kyu Kim
    Yong Jin Kim
    Seok Su Sohn
    Sunghak Lee
    [J]. Journal of Materials Science & Technology, 2021, 84 (25) : 219 - 229
  • [48] A DYNAMIC STUDY OF STRAIN-INDUCED GAMMA-]ALPHA' MARTENSITIC-TRANSFORMATION IN AN FE-CR-NI ALLOY
    KATAYAMA, T
    FUJITA, H
    [J]. JOURNAL OF THE JAPAN INSTITUTE OF METALS, 1988, 52 (01) : 8 - 17
  • [49] STRAIN-INDUCED FCC(GAMMA)-]BCC(ALPHA') TRANSFORMATION AND ACTIVE SLIP SYSTEMS IN FE-CR-NI ALLOYS
    UEDA, S
    FUJITA, H
    [J]. JOURNAL OF THE JAPAN INSTITUTE OF METALS, 1977, 41 (10) : 1007 - 1013
  • [50] A study of retained austenite transformation during high-strength Cr-Ni-Mo-V steel tempering
    Ziza, A. I.
    Mikhailov, M. S.
    Tsukanov, V. V.
    Nikolaev, D. I.
    Lychagina, T. A.
    [J]. LETTERS ON MATERIALS-PIS MA O MATERIALAKH, 2018, 8 (02): : 146 - 151
12345