Assessment and assurance of quality in water measurement by coulometric Karl Fischer titration of petroleum products

The precise and accurate determination of water in petroleum products-gasoline, diesel oil and aromatic hydrocarbons-is of significant importance for their normal functional and operational characteristics for economics as well as in meeting international requirements. The standard method ISO 12937 for the measurement of water by the coulometric Karl Fischer titration method was subject to within-laboratory assessment. Thereby it was established that the analytical procedure could not always be relied upon, especially when low levels of water were determined. The aim of this work is to assess each stage of the test procedure depending on the particular problems defined by the samples, using high-reactive Karl Fischer reagents and coulometric cells with and without a diaphragm, and to indicate the major factors causing the uncertainty. A reduced combined uncertainty was achieved by modifying the sample preparation step, the administration of the moisture in the coulometric cell, and sample injection manipulation. Experiments showed that the cell without the diaphragm ensures lower and uniform uncertainty of the measurements in the range of 0.01 to 10 mg H2O in comparison to the cell with a diaphragm and therefore is more appropriate for the determination of low water levels in the petroleum products. A procedure that utilized a mixture of the reagent and toluene (10:6) was able to resolve the problem of two phases of formation and reduced conductivity of the reagent in direct titration of diesel oils. The results suggest that the modified procedure ensures relative expanded uncertainty equal to or less than 2.0% (n=5, confidence interval close to 95%) and 99.4% recovery for petroleum products investigated in repeatability conditions.