Effect of delaying addition time of SMF superplasticizer on the physico-mechanical properties and durability of cement pastes

被引：22

作者：

El-Didamony, H. ^{[2
]}

Heikal, Mohamed ^{[1
]}

Khalil, Kh. A. ^{[2
]}

Al-Masry, S. ^{[2
]}

机构：

[1] Benha Univ, Fac Sci, Dept Chem, Banha, Egypt

[2] Zagazig Univ, Fac Sci, Dept Chem, Zagazig, Egypt

来源：

CONSTRUCTION AND BUILDING MATERIALS | 2012年 / 35卷

关键词：

Delaying addition time; Superplasticizer; Elevated temperature; Sulphate and chloride attack; RHEOLOGICAL PROPERTIES; TEMPERATURE; HYDRATION; CONCRETE; ADMIXTURE; STRENGTH;

D O I：

10.1016/j.conbuildmat.2012.02.068

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

This research aimed to investigate the influence of delaying addition time of laboratory prepared sulphonate melamine formaldehyde (SMF) superplasticizer on the physico-mechanical characteristics and durability of cement pastes subjected to elevated temperature up to 800 degrees C, or immersed in 4% MgSO4 and 4% MgCl2. The compressive strength increases with delayed addition time at 7.5 min up to 90 days. The cement pastes containing 1.0 mass% SMF superplasticizer, with delayed addition time at 7.5 min, has highest compressive strength, bulk density and lower total porosity. The presence of SMF superplasticizer with delaying addition time process of mixing increases the compressive strength, bulk density and decreases the total porosity. These work together to produce a compact structure, inhibiting the chloride and sulphate ions penetration, hence the total sulphate and chloride contents decrease. (C) 2012 Elsevier Ltd. All rights reserved.

引用

页码：261 / 269

页数：9

共 50 条

[21] Effect of elevated temperature on physico-mechanical properties of metakaolin blended cement mortar
Morsy, M. S.
Rashad, A. M.
El-Nouhy, H. A.
STRUCTURAL ENGINEERING AND MECHANICS, 2009, 31 (01) : 1 - 10
[22] Influence of Granite Powder on Physico-Mechanical and Durability Properties of Mortar
Ramadji, Christian
Messan, Adamah
Prud'Homme, Elodie
MATERIALS, 2020, 13 (23) : 1 - 22
[23] Incorporation of metagabbro as cement replacement in cement-based materials: A role of mafic minerals on the physico-mechanical and durability properties
Rashwan, Mohammed A.
Lasheen, El Saeed R.
Shalaby, Basel N.
CONSTRUCTION AND BUILDING MATERIALS, 2019, 210 : 256 - 268
[24] Physico-mechanical and microstructural characteristics of superplasticized silica fume-blended cement pastes
Heikal, M
SILICATES INDUSTRIELS, 2005, 70 (9-10): : 135 - 142
[25] EFFECT OF PHYSICO-MECHANICAL PROPERTIES OF A PITCH-POLYMER POLISHER LAYER ON ITS DURABILITY
MOROZOVA, EN
MOROZOV, IA
NIKITINA, VA
SOVIET JOURNAL OF OPTICAL TECHNOLOGY, 1976, 43 (08): : 486 - 487
[26] The effect of marble powder on physico-mechanical and microstructural properties of kaolin-based geopolymer pastes
Kaya, Mehmet
Koksal, Fuat
Bayram, Muhammed
Nodehi, Mehrab
Gencel, Osman
Ozbakkaloglu, Togay
STRUCTURAL CONCRETE, 2023, 24 (05) : 6485 - 6504
[27] Usage of ready-mixed concrete plant wastewater in concrete with superplasticizer: Effect on physico-mechanical properties
Aruntas, Hueseyin Yilmaz
Nalli, Engin
Kaplan, Gokhan
CONSTRUCTION AND BUILDING MATERIALS, 2022, 348
[28] Usage of ready-mixed concrete plant wastewater in concrete with superplasticizer: Effect on physico-mechanical properties
Aruntaş, Hüseyin Yılmaz
Nallı, Engin
Kaplan, Gökhan
Construction and Building Materials, 2022, 348
[29] Hydro-mechanical properties of fresh cement pastes containing polycarboxylate superplasticizer
Perrot, A.
Rangeard, D.
Picandet, V.
Melinge, Y.
CEMENT AND CONCRETE RESEARCH, 2013, 53 : 221 - 228
[30] Tracking the pozzolanic activity of mafic rock powder on durability performance of cement pastes under adverse conditions: Physico-mechanical properties, mineralogy, microstructure, and heat of hydration
Rashwan, Mohammed A.
Lasheen, El Saeed R.
Hegazy, Ahmed A.
JOURNAL OF BUILDING ENGINEERING, 2023, 71

← 1 2 3 4 5 →