Effect of Multiple-binders on Properties of Al2O3-based Ceramic Foam Filter

被引：0
|
作者：
Ma, Zhanhong [1 ]
Zhao, Peifeng [1 ]
机构：
[1] Henan Univ Sci & Technol, Sch Matererial Sci & Engn, Luoyang 471003, Henan, Peoples R China
来源：
NEW MATERIALS AND PROCESSES, PTS 1-3 | 2012年 / 476-478卷
关键词：
Al2O3-based foam ceramics filter; multiple-binder; property;
D O I：
10.4028/www.scientific.net/AMR.476-478.1003
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this paper, Al2O3 ceramic foam filters prepared by polyurethane sponge impregnation.The effect of multiple binders on properties of ceramic foam was studied. The results show that aluminum phosphate-CMC ratio of 2.5:1 under the 1350 degrees C sintered alumina matrix ceramic foam filters are the best performance. The compressive strength of the Al2O3-based foam ceramics prepared with optimal multiple-binder and sintered at 1350 degrees C could reach up to 1.697MPa. At the same time,it is obtained through test that the thermal shock times of sintered samples reached 5 by staying at 1100 degrees C for 10 min.
引用
收藏
页码：1003 / 1006
页数：4
相关论文
共 50 条
  • [41] Synergistically toughening effect of SiC whiskers and nanoparticles in Al2O3-based composite ceramic cutting tool material
    Xuefei Liu
    Hanlian Liu
    Chuanzhen Huang
    Limei Wang
    Bin Zou
    Bin Zhao
    [J]. Chinese Journal of Mechanical Engineering, 2016, 29 : 977 - 982
  • [42] Effect of LaMgAl11O19 addition and temperature on the mechanical properties of Al2O3-based ceramics
    Tang, Hao
    Fang, Minghao
    Tang, Chao
    Huang, Zhaohui
    Liu, Haitao
    Zhu, Hekai
    Liu, Yangai
    Wu, Xiaowen
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016, 655 : 160 - 167
  • [43] Titanium Effect on Microstructure and Fracture toughness of Al2O3-BASED Composites
    Miranda-Hernandez, Jose G.
    Refugio-Garcia, Elizabeth
    Terres-Rojas, Eduardo
    Rocha-Rangel, Enrique
    [J]. METASTABLE AND NANOSTRUCTURED MATERIALS IV, 2011, 691 : 32 - +
  • [44] Effects of metal binder on the microstructure and mechanical properties of Al2O3-based micro-nanocomposite ceramic tool material
    Ni, Xiu-ying
    Zhao, Jun
    Sun, Jia-lin
    Gong, Feng
    Li, Zuo-li
    [J]. INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, 2017, 24 (07) : 826 - 832
  • [45] Effects of metal binder on the microstructure and mechanical properties of Al2O3-based micro-nanocomposite ceramic tool material
    Xiu-ying Ni
    Jun Zhao
    Jia-lin Sun
    Feng Gong
    Zuo-li Li
    [J]. International Journal of Minerals,Metallurgy and Materials, 2017, 24 (07) : 826 - 832
  • [46] Effects of metal binder on the microstructure and mechanical properties of Al2O3-based micro-nanocomposite ceramic tool material
    Xiu-ying Ni
    Jun Zhao
    Jia-lin Sun
    Feng Gong
    Zuo-li Li
    [J]. International Journal of Minerals, Metallurgy, and Materials, 2017, 24 : 826 - 832
  • [47] The impact of mechanical properties on the cutting performance of Al2O3-based ceramic cutting tools for green turning of hardened steel
    Ni, Xiuying
    Zhao, Jun
    Gong, Feng
    [J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2024,
  • [48] Microstructure, growth mechanism and mechanical property of Al2O3-based eutectic ceramic in situ composites
    Zhang, Jun
    Su, Haijun
    Song, Kan
    Liu, Lin
    Fu, Hengzhi
    [J]. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2011, 31 (07) : 1191 - 1198
  • [49] Wear of the Al2O3-based multi-ceramic coatings produced by SHS flame spraying
    Du, AK
    Wang, JJ
    Ye, MH
    Yan, J
    [J]. HIGH-PERFORMANCE CERAMICS III, PTS 1 AND 2, 2005, 280-283 : 1123 - 1126
  • [50] Thermal behavior of integral Al2O3-based ceramic molds for fabricating gas turbine blades
    Lu, Z. L.
    Zhao, L.
    Li, Y. N.
    Wu, H. H.
    Li, D. C.
    [J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2014, 228 (05) : 695 - 703
12345