Effects of ultraviolet radiation and associated elevated temperature on mechanical performance of steel/CFRP double strap joints

被引:95
|
作者
Tien-Cuong Nguyen [1 ]
Bai, Yu [1 ]
Zhao, Xiao-Ling [1 ]
Al-Mahaidi, Riadh [2 ]
机构
[1] Monash Univ, Dept Civil Engn, Clayton, Vic 3800, Australia
[2] Swinburne Univ Technol, Fac Engn & Ind Sci, Hawthorn, Vic 3122, Australia
基金
澳大利亚研究理事会;
关键词
CFRP; Steel; Double strap joint; Mechanical properties; Ultraviolet; Elevated temperatures; COOLED GFRP SLABS; COMPOSITES; LIGHT; CONSTRUCTION; DURABILITY; POLYESTER; ADHESIVE; BEHAVIOR; FIRE;
D O I
10.1016/j.compstruct.2012.05.036
中图分类号
O3 [力学];
学科分类号
08 ; 0801 ;
摘要
Although extensive studies of the bond between steel and CFRP under various environmental exposures have been carried out, the effects of UV have not been examined to date. This knowledge gap is addressed in this paper. Specimens (epoxy adhesive, CFRP laminates and steel/CFRP adhesively-bonded joints) were exposed to UV for various time periods and identical reference specimens were exposed to only thermal environments without UV. It was found that UV exposure does not influence the tensile strength of CFRP composites. The tensile strength of the adhesive reduced by 13.9% while modulus showed a significant increase by 105% after 744 h of exposure. The tensile modulus of adhesive exposed to only thermal environment also increased by 38%, considerably less than that induced by UV exposure. The UV exposure also led to a decrease in joint strength but an increase in stiffness, caused by the temperature effect rather than the UV rays. (C) 2012 Elsevier Ltd. All rights reserved.
引用
收藏
页码:3563 / 3573
页数:11
相关论文
共 50 条
  • [21] Effects of elevated temperature on epoxy bonded CFRP-to-steel joints in Mode I fracture
    Jabbari, Milad
    Raftery, Gary M.
    Lim, James B. P.
    STRUCTURES, 2021, 33 : 3540 - 3549
  • [22] Strength of Cfrp-steel double strap joints under impact loads using genetic programming
    Al-Mosawe, Alaa
    Kalfat, Robin
    Al-Mahaidi, Riadh
    COMPOSITE STRUCTURES, 2017, 160 : 1205 - 1211
  • [23] Mechanical characterization of CFRP/steel bond cured and tested at elevated temperature
    Chandrathilaka, E. R. K.
    Gamage, J. C. P. H.
    Fawzia, S.
    COMPOSITE STRUCTURES, 2019, 207 : 471 - 477
  • [24] Experimental investigation on elevated temperature mechanical properties in cast steel joints
    Qiang, Bin
    Liu, Xing
    Wu, Hang
    Wu, Jun
    Shi, Hongchang
    Li, Yadong
    STRUCTURES, 2024, 62
  • [25] Fire Performance of CFRP Strengthened Steel I Beams Cured at Elevated Temperature
    Chandrathilaka, E. R. K.
    Gamage, J. C. P. H.
    PROCEEDINGS OF THE 9TH INTERNATIONAL CONFERENCE ON SUSTAINABLE BUILT ENVIRONMENT (ICSBE 2018), 2020, 44 : 526 - 537
  • [26] Failure of CFRP-to-steel double strap joint bonded using carbon nanotubes modified epoxy adhesive at moderately elevated temperatures
    Korayem, Asghar H.
    Chen, Shu Jian
    Zhang, Qian Hui
    Li, Chen Yang
    Zhao, Xiao Ling
    Duan, Wen Hui
    COMPOSITES PART B-ENGINEERING, 2016, 94 : 95 - 101
  • [27] Effects of Elevated Temperature Curing on Glass Transition Temperature of Steel/CFRP Joint and Pure Epoxy Adhesive
    Chandrathilaka, E. R. K.
    Gamage, J. C. P. H.
    Fawzia, S.
    ELECTRONIC JOURNAL OF STRUCTURAL ENGINEERING, 2018, 18 (02): : 1 - 6
  • [28] Fatigue performance and parameter optimization of CFRP-reinforced steel plate considering elevated temperature
    Li, You
    Li, Hongyi
    Ou, Zhihua
    Ma, Xiaowan
    Zhu, Ziming
    Song, Chengjun
    MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, 2023, 31 (28) : 10827 - 10838
  • [29] Mechanical performance of a bond-type anchorage system for CFRP cable exposed to elevated temperature
    Jiang, Zhengwen
    Pi, Xiangfei
    Fang, Zhi
    Li, Zerun
    Li, Quanhao
    Wang, Zhiwei
    ENGINEERING STRUCTURES, 2024, 302
  • [30] Thermal cycling and ultraviolet radiation effects on fatigue performance of triaxial CFRP laminates for bridge applications
    Mosallam, Ayman
    Xin, Haohui
    He, Shaohua
    Agwa, Ashraf Ak
    Adanur, Suleyman
    Salama, Mohamed A.
    JOURNAL OF COMPOSITE MATERIALS, 2022, 56 (02) : 279 - 294