Ultraviolet radiation emitted by CO2 arc welding

被引:18
|
作者
Okuno, T
Ojima, J
Saito, H
机构
[1] Natl Inst Ind Hlth, Div Work Environm Evaluat, Tama Ku, Kawasaki, Kanagawa 2148585, Japan
[2] Natl Inst Ind Hlth, Div Human Engn, Tama Ku, Kawasaki, Kanagawa 2148585, Japan
[3] Natl Inst Ind Hlth, Div Hazard Assessment, Tama Ku, Kawasaki, Kanagawa 2148585, Japan
来源
ANNALS OF OCCUPATIONAL HYGIENE | 2001年 / 45卷 / 07期
关键词
ultraviolet radiation; CO2 arc welding; effective irradiance;
D O I
10.1093/annhyg/45.7.597
中图分类号
R1 [预防医学、卫生学];
学科分类号
1004 ; 120402 ;
摘要
The arcs associated with arc welding emit high levels of ultraviolet radiation (UVR), and this often causes acute injuries In the workplace, particularly photokeratoconjunctivitis. It is important to know the level of UVR emitted by are welding under various conditions, as this information will help in evaluating potential UVR hazards in welding workplaces and taking protective measures against it. In this study, the ACGIH effective irradiance for UVR was measured experimentally for CO2 are welding in order to evaluate its UVR hazards. A welding robot was used in the experiment in order to realize reproducible and consistent welding operations. The effective Irradiance at 1 m from the arc was in the range 0.28-7.85 W/m(2) (28-785 muW/cm(2)) under the study conditions. The corresponding permissible exposure time per day is only 4-100 s, suggesting that UVR from CO2 are welding is actually hazardous for the eye and skin. It was found that the effective irradiance is inversely proportional to the square of the distance from the arc, is strongly dependent on the direction of emission from the arc with a maximum at 50-60 degrees from the plate surface, and tends to increase with welding current. (C) 2001 British Occupational Hygiene Society. Published by Elsevier Science Ltd. All rights reserved.
引用
收藏
页码:597 / 601
页数:5
相关论文
共 50 条
  • [31] TWIN-ARC HIGH-SPEED CO2 WELDING
    FAINBERG, LI
    RYBAKOV, AA
    MANDELBERG, SL
    AUTOMATIC WELDING USSR, 1975, 28 (02): : 27 - 30
  • [32] Laboratory Evaluation of Carbon Monoxide Exposure in CO2 Arc Welding
    Ojima, Jun
    JOURNAL OF OCCUPATIONAL HEALTH, 2009, 51 (04) : 377 - 379
  • [33] VARIATION OF WIRE FEEDING RATE IN CO2 ARC WELDING.
    Yamada, Tadaaki
    Hirakoso, Keiichiro
    Kaneko, Tamotsu
    Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, 1984, 2 (02): : 30 - 35
  • [34] Generation Rate of Carbon Monoxide from CO2 Arc Welding
    Ojima, Jun
    JOURNAL OF OCCUPATIONAL HEALTH, 2013, 55 (01) : 39 - 42
  • [35] Use of CO2 in Modified Short Arc MAG-Welding
    Toivanen, J.
    Hiltunen, E.
    Martikainen, J.
    MECHANIKA 2015: PROCEEDINGS OF THE 20TH INTERNATIONAL SCIENTIFIC CONFERENCE, 2015, : 244 - 248
  • [36] Numerical analysis of plasma in CO2 laser and arc hybrid welding
    Young Tae Cho
    Suck Joo Na
    International Journal of Precision Engineering and Manufacturing, 2015, 16 : 787 - 795
  • [37] Self-optimizing control of CO2 arc welding process
    Yu, J
    Jiang, L
    COMPUTER-AIDED PRODUCTION ENGINEERING, 2001, : 163 - 166
  • [38] EQUIPMENT FOR CO2 ARC-WELDING WITH ADDITIONAL FILLER WIRE
    BUDNIK, NM
    WELDING PRODUCTION, 1974, 21 (09): : 88 - 89
  • [39] Controlling the droplet transfer process in CO2 welding with a long arc
    Knyaz'kov, A.F.
    Krampit, N.Yu.
    Krampit, A.G.
    Welding International, 2008, 22 (08) : 534 - 536
  • [40] Arc ignition of CWW CO2 welding in A36 steel
    Yang, Zhidong
    Fang, Chenfu
    Chen, Yong
    Chen, Zhiwei
    Zhu, Yu
    MATERIALS AND MANUFACTURING PROCESSES, 2018, 33 (07) : 743 - 748