Chemical interaction and activation phenomena in cold-sprayed Cu particles on Sn substrate

被引:3
|
作者
Ko, Kyung Hyun [1 ,2 ]
Lee, H. [1 ,2 ]
Jung, Sang-Hyun [3 ]
Ahn, Byungmin [1 ,2 ]
机构
[1] Ajou Univ, Dept Mat Sci & Engn, Suwon 16499, South Korea
[2] Ajou Univ, Dept Energy Syst Res, Suwon 16499, South Korea
[3] Agcy Def Dev, Res & Dev 4, Daejeon 34060, South Korea
基金
新加坡国家研究基金会;
关键词
Cold spray; Cu; Intermixing; Interfaces; Intermetallic compounds; COATINGS; DEPOSITION; MECHANISM; TEMPERATURE;
D O I
10.1016/j.matlet.2017.12.092
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
For the interactions at the interfaces of cold sprayed particles/substrates, the formation of intermetallic compounds (IMCs) of cold-sprayed Cu particles on a Sn substrate was investigated. Under room-temperature spray conditions, intermetallic layers (Cu6Sn5) were formed at the interfaces because of the high velocity collisions of the Cu particles. For the chemical interaction and activation phenomena, including intermixing at the interfaces, the bonding mechanism of the cold-sprayed coatings involved interlocking of the sprayed particles on the blasted substrates, as well as interactions between the particles and the substrate due to the high-velocity collisions (intermixing -> particles' interaction). (C) 2017 Elsevier B.V. All rights reserved.
引用
收藏
页码:161 / 164
页数:4
相关论文
共 50 条
  • [41] Cold-Sprayed Cu-MoS2 and Its Fretting Wear Behavior
    Zhang, Yinyin
    Descartes, Sylvie
    Phuong Vo
    Chromik, Richard R.
    JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2016, 25 (03) : 473 - 482
  • [42] Effect of Substrate Temperature on the Formation Mechanism of Cold-Sprayed Aluminum, Zinc and Tin Coatings
    J. G. Legoux
    E. Irissou
    C. Moreau
    Journal of Thermal Spray Technology, 2007, 16 : 619 - 626
  • [43] Effect of substrate temperature on the formation mechanism of cold-sprayed aluminum, zinc and tin coatings
    Legoux, J. G.
    Irissou, E.
    Moreau, C.
    JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2007, 16 (5-6) : 619 - 626
  • [44] The Mechanical and Tribological Properties of Cold-Sprayed Cermet Coatings—Al Alloy Substrate Systems
    Anna Trelka
    Anna Góral
    Wojciech Żórawski
    Tomasz Gancarz
    Paweł Petrzak
    Journal of Thermal Spray Technology, 2023, 32 : 1714 - 1727
  • [45] Crack Initiation and Growth Behavior of Cold-Sprayed Ni Particles on IN718 Alloy
    P. Cavaliere
    A. Silvello
    Journal of Materials Engineering and Performance, 2017, 26 : 1929 - 1937
  • [46] Improving Adhesion Strength and Electrical Conductivity of Cold-Sprayed Al Deposit on Cu Substrate Through Friction-Stir-Processing
    Ji, Gang
    Liu, Hong
    Yang, Guan-Jun
    Luo, Xiao-Tao
    Li, Cheng-Xin
    Sun, Yu-Feng
    Zhu, Shu-Hao
    Zhao, Chen
    JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2022, 31 (06) : 1813 - 1826
  • [47] Improving Adhesion Strength and Electrical Conductivity of Cold-Sprayed Al Deposit on Cu Substrate Through Friction-Stir-Processing
    Gang Ji
    Hong Liu
    Guan-Jun Yang
    Xiao-Tao Luo
    Cheng-Xin Li
    Yu-Feng Sun
    Shu-Hao Zhu
    Chen Zhao
    Journal of Thermal Spray Technology, 2022, 31 : 1813 - 1826
  • [48] Investigation of Impact Behavior of Cold-Sprayed Large Annealed Copper Particles and Characterization of Coatings
    Li, Wenya
    Guo, Xueping
    Yu, Min
    Liao, Hanlin
    Coddet, Christian
    JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2011, 20 (1-2) : 252 - 259
  • [49] Investigation of Impact Behavior of Cold-Sprayed Large Annealed Copper Particles and Characterization of Coatings
    Wenya Li
    Xueping Guo
    Min Yu
    Hanlin Liao
    Christian Coddet
    Journal of Thermal Spray Technology, 2011, 20 : 252 - 259
  • [50] Crack Initiation and Growth Behavior of Cold-Sprayed Ni Particles on IN718 Alloy
    Cavaliere, P.
    Silvello, A.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2017, 26 (04) : 1929 - 1937