Buckling and compressive failure of stepped-lap joints repaired with composite patches

被引：13
|
作者：
Beylergil, Bertan [1 ]
Aktas, Alaattin [2 ]
Cunedioglu, Yusuf [1 ]
机构：
[1] Nigde Univ, Fac Engn, Dept Mech Engn, Nigde, Turkey
[2] Istanbul Univ, Fac Engn, Dept Mech Engn, Istanbul, Turkey
来源：
JOURNAL OF COMPOSITE MATERIALS | 2012年 / 46卷 / 26期
关键词：
Buckling; FEA; mechanical testing; pultrusion; FINITE-ELEMENT-ANALYSIS; ADHESIVE JOINTS; SHAPE OPTIMIZATION; STRESS-ANALYSIS; SHEAR-STRENGTH; TENSILE; DISTRIBUTIONS; BEHAVIOR; SPEW; THICKNESS;
D O I：
10.1177/0021998312437001
中图分类号：
TB33 [复合材料];
学科分类号：
摘要：
In this study, the buckling and compressive failure of adhesively-bonded stepped-lap joints (with/without composite patches) composed of pultruded glass fiber-reinforced polymer composite laminates was investigated experimentally and numerically. Two-component epoxy adhesive was used for bonding purposes. Composite patches were woven glass-epoxy layer. They were added onto the conventional stepped-lap joints so that additional load transfer paths were created and localized stress concentrations near joint edge were reduced. The axial compression tests were performed and the results revealed that the buckling and failure load of new stepped lap composite joints with composite patches were significantly higher than the conventional stepped lap joints. The influence of the overlap length was evaluated. For both types of joints, a small increase was observed in failure loads by increase of the overlap length. Numerical results showed a very good agreement with experimental results.
引用
收藏
页码：3213 / 3230
页数：18
相关论文
共 50 条
  • [21] Study on the buckling behavior of aluminum alloy sheets - before and after repaired with composite patches
    Li, Xin
    Zhong, Anbiao
    Zhang, Jiale
    Dong, Weilin
    Xiong, Ruoqin
    Zhang, Heng
    Geng, Xiaoliang
    Huang, Lei
    Liu, Jun
    THIN-WALLED STRUCTURES, 2024, 205
  • [22] Prediction of Failure Pressure in Pipelines with Localized Defects Repaired by Composite Patches
    A. Saffar
    A. Darvizeh
    R. Ansari
    A. Kazemi
    M. Alitavoli
    Journal of Failure Analysis and Prevention, 2019, 19 : 1801 - 1814
  • [23] Prediction of Failure Pressure in Pipelines with Localized Defects Repaired by Composite Patches
    Saffar, A.
    Darvizeh, A.
    Ansari, R.
    Kazemi, A.
    Alitavoli, M.
    JOURNAL OF FAILURE ANALYSIS AND PREVENTION, 2019, 19 (06) : 1801 - 1814
  • [24] Stress-based health assessment of composite open-end cylindrical laminated shell with stepped-lap repairs
    Xu, Jianxin
    Dou, Chen
    Li, Dinghe
    BIOTECHNOLOGY, CHEMICAL AND MATERIALS ENGINEERING, PTS 1-3, 2012, 393-395 : 297 - 303
  • [25] An improved framework based on four-parameter viscoelastic model for stress analysis of adhesively-bonded single stepped-lap joints
    Veisytabar, Mehdi
    Reza, Arash
    Shekari, Younes
    MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, 2023, 30 (24) : 5137 - 5158
  • [26] Adhesive nonlinearity and the prediction of failure in bonded composite lap joints
    Kim, H
    Lee, J
    JOINING AND REPAIR OF COMPOSITE STRUCTURES, 2004, : 22 - 41
  • [27] Stress analysis of adhesively-bonded single stepped-lap joints based on three-parameter fractional viscoelastic foundation model
    Veisytabar, Mehdi
    Reza, Arash
    Shekari, Younes
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, 2022, 236 (05) : 933 - 949
  • [28] A three-dimensional finite element stress analysis and strength prediction of stepped-lap adhesive joints of dissimilar adherends subjected to tensile loadings
    Ichikawa, Kohei
    Shin, Yuichiro
    Sawa, Toshiyuki
    Iwamoto, Takeshi
    Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A, 2009, 75 (751): : 279 - 286
  • [29] A three-dimensional finite element stress analysis and strength prediction of stepped-lap adhesive joints of dissimilar adherends subjected to bending moments
    Ichikawa, Kohei
    Shin, Yuichiro
    Sawa, Toshiyuki
    Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A, 2009, 75 (759): : 1562 - 1569
  • [30] A three-dimensional finite-element stress analysis and strength evaluation of stepped-lap adhesive joints subjected to static tensile loadings
    Ichikawa, Kohei
    Shin, Yuichiro
    Sawa, Toshiyuki
    INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2008, 28 (08) : 464 - 470
12345