Strengthening of σ phase in a Fe20Cr9Ni cast austenite stainless steel

被引:18
|
作者
Wang, Y. Q. [1 ,2 ]
Han, J. [1 ]
Yang, B. [1 ]
Wang, X. T. [1 ]
机构
[1] Univ Sci & Technol Beijing, State Key Lab Adv Met & Mat, Beijing 100083, Peoples R China
[2] Anhui Univ Technol, Sch Mat Sci & Engn, Maanshan 243002, Anhui, Peoples R China
关键词
Cast austenite stainless steel; Yield and ultimate tensile strengths; sigma phase; In situ tensile test; MECHANICAL-PROPERTIES; CREEP-PROPERTIES; PRECIPITATION; DUCTILITY; CORROSION;
D O I
10.1016/j.matchar.2013.07.019
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The strengthening mechanism of a phase in a Fe20Cr9Ni cast austenite stainless steel used for primary coolant pipes of nuclear power plants has been investigated. The yield and ultimate tensile strengths of aged specimens increased comparing with those of the unaged ones. It was found that the increase of strengths is due to the hard and brittle (sigma + gamma(2)) structure which decomposed from a phase in the steel. Fracture surfaces of specimens-after in situ tensile test showed that the inhibition of (sigma + gamma(2)) structure on the dislocation movements was more significant than ferrite although cracks started predominately at sigma/gamma(2) interfaces. The (sigma + gamma(2)) structure behaves like a fiber reinforced composite material. (C) 2013 Elsevier Inc. All rights reserved.
引用
收藏
页码:120 / 125
页数:6
相关论文
共 50 条
  • [41] Effects of Cr - Ni 18/9 Austenitic Cast Steel Modification by Mischmetal
    Gajewski, M.
    Kasinska, J.
    ARCHIVES OF FOUNDRY ENGINEERING, 2012, 12 (04) : 47 - 52
  • [42] Structure of Strengthening Particles of Niobium Carbide in Fe-Cr-Ni Cast Refractory Alloys
    Kondrat'ev, S. Yu.
    Svyatisheva, E. V.
    Anastasiadi, G. P.
    Petrov, S. N.
    PHYSICS OF METALS AND METALLOGRAPHY, 2017, 118 (07): : 659 - 670
  • [43] Study on wear resistant cast B-containing 1Cr18Ni9Ti stainless steel
    Kuang Jiacai1
    2.School of Electromechanical Engineering
    3.School of Mechanical Engineering
    China Foundry, 2009, 6 (01) : 32 - 36
  • [44] Solidification microstructure and deformation of stainless steel 1Cr18Ni9Ti cast by electromagnetic centrifugal casting
    Lin, G
    Yang, YS
    Hua, FA
    Guo, DY
    Hu, ZQ
    ACTA METALLURGICA SINICA, 2003, 39 (12) : 1233 - 1237
  • [45] Inclusions containing Ti in con-cast bloom of 1Cr18Ni9Ti stainless steel
    Chen, Derong
    Wei, Ruihang
    You, Dingfang
    Li, Gang
    Lu, Longsun
    Chen, Zhengyan
    Kang T'ieh/Iron and Steel (Peking), 1988, 23 (08): : 16 - 20
  • [46] Study on wear resistant cast B-containing 1Cr18Ni9Ti stainless steel
    Kuang Jiacai
    Jiang Zhiqiang
    Zhang Shiyin
    Ye Chang
    Liu Qicheng
    CHINA FOUNDRY, 2009, 6 (01) : 32 - 36
  • [47] Study on wear resistant cast B-containing 1Cr18Ni9Ti stainless steel
    Kuang JiacaiJiang Zhiqiang Zhang ShiyinYe Changand Liu Qicheng Department of Material Science and EngineeringChangsha University of Science and TechnologyChangsha ChinaSchool of Electromechanical EngineeringZhengzhou Institute of AeronauticsZhengzhou ChinaSchool of Mechanical Engineering Xian Jiaotong UniversityXian China
    China Foundry, 2009, (01) : 32 - 36
  • [48] CREEP IN A 25CR-20NI AUSTENITIC STAINLESS-STEEL
    POLESNA, M
    PAHUTOVA, M
    CADEK, J
    RES MECHANICA, 1985, 15 (02): : 129 - 149
  • [49] A Fe-Ni-Cr system filler metal for brazing of stainless steel
    赵海生
    熊华平
    潘晖
    淮军锋
    China Welding, 2015, 24 (01) : 1 - 5
  • [50] Evidence for Suzuki effect in an Fe-Ni-Cr austenitic stainless steel
    Kaneko, Y.
    Kaneko, K.
    Nohara, A.
    Saka, H.
    Philosophical Magazine A: Physics of Condensed Matter, Defects and Mechanical Properties, 71 (02):