Performance Investigation of Feed Horn using FDM 3D Printing Technology

被引：0
|
作者：
Kim, Sang Tae [1 ]
Lee, Jae W. [1 ]
Lee, Taek-Kyung [1 ]
机构：
[1] Korea Aerosp Univ, Goyang, South Korea
来源：
2018 INTERNATIONAL SYMPOSIUM ON ANTENNAS AND PROPAGATION (ISAP) | 2018年
关键词：
3D printing technology; FDM; Feed Horn; Conductive material;
D O I：
暂无
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
We fabricated feed horn using 3D printing technology and conductive coating material. The type of printing is FDM(Fused Deposition Modeling) and because printing material is dielectric, the printed antenna was coated by conductive material. To test the conductivity of coating material, two short plates and rectangular waveguide are fabricated and measured with a frequency response. Finally, frequency response and measured results were compared.
引用
收藏
页数：2
相关论文
共 50 条
  • [1] FDM 3D PRINTING TECHNOLOGY IN MANUFACTURING COMPOSITE ELEMENTS
    Dudek, P.
    [J]. ARCHIVES OF METALLURGY AND MATERIALS, 2013, 58 (04) : 1415 - 1418
  • [2] Mathematical model of extrusion in FDM 3D printing technology
    Kudryashova, O. B.
    Toropkov, N. E.
    Lerner, M. I.
    Vorozhtsov, A. B.
    [J]. MATERIALS PHYSICS AND MECHANICS, 2022, 50 (03): : 388 - 400
  • [3] FDM 3D Printing of high performance composite materials
    Russo, Anna Costanza
    Andreassi, Giustiniano
    Di Girolamo, Achille
    Pappada, Silvio
    Buccoliero, Giuseppe
    Barile, Gianluca
    Veglio, Francesco
    Stornelli, Vincenzo
    [J]. 2019 IEEE INTERNATIONAL WORKSHOP ON METROLOGY FOR INDUSTRY 4.0 AND INTERNET OF THINGS (METROIND4.0&IOT), 2019, : 355 - 359
  • [4] A Triple Mode Waveguide Corrugated Horn Antenna Using 3D Printing Technology
    Castro, Alejandro T.
    Sharma, Satish K.
    [J]. 2017 IEEE INTERNATIONAL SYMPOSIUM ON ANTENNAS AND PROPAGATION & USNC/URSI NATIONAL RADIO SCIENCE MEETING, 2017, : 1235 - 1236
  • [5] Investigation on fabricating 3D structures using inkjet printing technology
    Ibrahim, Mustaffa
    Otsubo, Takayuki
    Narahara, Hiroyuki
    Koresawa, Hiroshi
    Suzuki, Hiroshi
    [J]. TOWARDS SYNTHESIS OF MICRO - /NANO - SYSTEMS, 2007, (05): : 209 - +
  • [6] Filament Supply Sensing and Control for FFF/FDM 3D Printing Technology
    Mateev, Valentin
    Ralchev, Martin
    Marinova, Iliana
    [J]. Lecture Notes in Electrical Engineering, 2022, 886 : 301 - 313
  • [7] WELDING METHODS OF FILAMENTS USED IN FFF/FDM 3D PRINTING TECHNOLOGY
    Panda, Anton
    Cehelsky, Samuel
    [J]. MM SCIENCE JOURNAL, 2020, 2020 : 4062 - 4067
  • [8] Thermal Control of Filament Supply in FFF/FDM 3D Printing Technology
    Ralchev, Martin
    Mateev, Valentin
    Marinova, Iliana
    [J]. 2021 XXXI INTERNATIONAL SCIENTIFIC SYMPOSIUM METROLOGY AND METROLOGY ASSURANCE (MMA 2021), 2021, : 81 - 84
  • [9] Evaluation of 3D Printing Technology for Corrugated Horn Antenna Manufacturing
    Decrossas, Emmanuel
    Reck, Theodore
    Lee, Choonsup
    Jung-Kubiak, Cecile
    Mehdi, Imran
    Chattopadhyay, Goutam
    [J]. 2016 IEEE INTERNATIONAL SYMPOSIUM ON ELECTROMAGNETIC COMPATIBILITY (EMC), 2016, : 251 - 255
  • [10] Design and prototype manufacturing of a feed system for Ku-band satellite communication by using 3D FDM/PLA printing and conductive paint technology
    Carkaci, M. Emre
    Secmen, Mustafa
    [J]. INTERNATIONAL JOURNAL OF RF AND MICROWAVE COMPUTER-AIDED ENGINEERING, 2020, 30 (04)
12345