FDM 3D Printing of high performance composite materials

被引：1

作者：

Russo, Anna Costanza ^{[1
]}

Andreassi, Giustiniano ^{[1
]}

Di Girolamo, Achille ^{[2
]}

Pappada, Silvio ^{[3
]}

Buccoliero, Giuseppe ^{[3
]}

Barile, Gianluca ^{[4
]}

Veglio, Francesco ^{[4
]}

Stornelli, Vincenzo ^{[4
]}

机构：

[1] Comec Innovat, R&D Dept, Chieti, Italy

[2] Skepsis Srl, R&D Dept, Pescara, Italy

[3] CETMA, Adv Mat & Proc Consulting Dept, Brindisi, Italy

[4] Univ Aquila, Dept Ind & Informat Engn, Laquila, Italy

来源：

2019 IEEE INTERNATIONAL WORKSHOP ON METROLOGY FOR INDUSTRY 4.0 AND INTERNET OF THINGS (METROIND4.0&IOT) | 2019年

关键词：

Additive Manufacturing; 3D printing; supports; FDM;

D O I：

10.1109/metroi4.2019.8792862

中图分类号：

TP301 [理论、方法];

学科分类号：

081202 ;

摘要：

This work aims to the definition of the requirements of a new pre-impregnated high-performance material to be 3D printed. The compression molding process was used as a reference for the transformation of the new prepregs to eco-sustainable matrix to be made flush in order to be fused and deposited with a FDM 3D printer. Furthermore, the main characteristics that the matrix must have in order to be used to produce prepreg (viscosity, pot-life, shelf-life, etc.) have been identified and here presented. Finally, a commercial printer has been modified and used for filament test deposition.

引用

页码：355 / 359

页数：5

共 50 条

[1] A review article on FDM process parameters in 3D printing for composite materials
Patel, Ravikumar
Desai, Chirag
Kushwah, Sagarsingh
Mangrola, M. H.
[J]. MATERIALS TODAY-PROCEEDINGS, 2022, 60 : 2162 - 2166
[2] FDM 3D PRINTING TECHNOLOGY IN MANUFACTURING COMPOSITE ELEMENTS
Dudek, P.
[J]. ARCHIVES OF METALLURGY AND MATERIALS, 2013, 58 (04) : 1415 - 1418
[3] FDM printing of 3D forms with embedded fibrous materials
Richter, Christoph
Schmuelling, Stefan
Ehrmann, Andrea
Finsterbusch, Karin
[J]. DESIGN, MANUFACTURING AND MECHATRONICS (ICDMM 2015), 2016, : 961 - 969
[4] The Use of Composite Materials in 3D Printing
Blanco, Ignazio
[J]. JOURNAL OF COMPOSITES SCIENCE, 2020, 4 (02):
[5] Composite materials with graphenic materials by extrusion for 3D printing
Martinez Borja, Ana Lilia
Perez Bueno, Jose de Jesus
Mendoza Lopez, Maria Luisa
[J]. MRS ADVANCES, 2018, 3 (64): : 3891 - 3898
[6] Composite materials with graphenic materials by extrusion for 3D printing
Ana Lilia Martínez Borja
José de Jesús Pérez Bueno
Maria Luisa Mendoza Lopez
[J]. MRS Advances, 2018, 3 (64) : 3891 - 3898
[7] FDM-based 3D printing of PLA/PHA composite polymers
Berivan Cecen
[J]. Chemical Papers, 2023, 77 : 4379 - 4386
[8] Characterization of PLA/TPU composite filaments manufactured for 3D printing with FDM
Jayswal, Ajay
Adanur, Sabit
[J]. JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS, 2023, 36 (04) : 1450 - 1471
[9] FDM-based 3D printing of PLA/PHA composite polymers
Cecen, Berivan
[J]. CHEMICAL PAPERS, 2023, 77 (08) : 4379 - 4386
[10] Advanced Composite Materials Utilized in FDM/FFF 3D Printing Manufacturing Processes: The Case of Filled Filaments
Kantaros, Antreas
Soulis, Evangelos
Petrescu, Florian Ion Tiberiu
Ganetsos, Theodore
Koh, Young-Hag
[J]. MATERIALS, 2023, 16 (18)

← 1 2 3 4 5 →