Study on Overburden Structure Characteristics and Induced Scour Mechanisms of Horizontal Sublevel Mining in Steep and Extra-Thick Coal Seams

被引:2
|
作者
Ge, Shiguo [1 ]
Yuan, Chongliang [2 ]
Chang, Qingliang [1 ,3 ]
Wang, Yongzhong [2 ]
Zhang, Biao [1 ,3 ]
机构
[1] China Univ Min & Technol, Sch Mines, Xuzhou 221116, Jiangsu, Peoples R China
[2] Yaojie Coal Power Grp Co Ltd, Lanzhou 730080, Peoples R China
[3] State Key Lab Coal Resources & Safe Min, Xuzhou 221116, Jiangsu, Peoples R China
基金
中国国家自然科学基金;
关键词
steep thick; horizontal segmentation; induced scour mechanism; articulated rock beam;
D O I
10.3390/su141911980
中图分类号
X [环境科学、安全科学];
学科分类号
08 ; 0830 ;
摘要
In order to study the space-time evolution law and the induced impact mechanism of overburden breaking in the tangential horizontal sublevel during the fully mechanized mining of extra-thick and steep coal seams, we took the Yaojie No. 3 mine as an example. Through the establishment of an overburden breaking mechanical model, the structural characteristics of hinged rock beams after overburden breaking and the space-time evolution law of overburden structure instability were analyzed, the static and dynamic load conditions that induce rockbursts were analyzed, and the induced impact mechanism of dynamic and static load superposition was revealed. Our research showed that, due to the asymmetry of the roof and floor, the coal body in the working face is in the strong shear stress zone at the end of the air inlet roadway, which easily produces shear failure. The lateral support pressure and the shear stress of the coal body in the goaf are the static load sources of the rockburst in the steep coal seam; after the roof overburden is broken, a hinge-bearing structure is formed under the support of the sliding force of the fault block and the floating gangue in the goaf. When the coal is mined in the lower section, the strong dynamic load formed by the impact of the fault block on the topmost coal is the main dynamic load source of the impact on the working face. Under the superpositions of the dynamic load and static load, the coal and rock lose stability and release energy in a large range, generating dynamic and static superimposed rockbursts. Furthermore, the internal mechanism of the occurrence of rockbursts during the mining of steep and extra-thick coal seams in the Yaojie No. 3 coal mine was revealed. The static load of the coal body comes from the clamping actions of the roof and floor, and the dynamic impact load comes from the clamping structure's instability. The reason for the occurrence of rockbursts in the mining of steep and extra-thick coal seams in the Yaojie No. 3 coal mine was reasonably explained.
引用
收藏
页数:15
相关论文
共 50 条
  • [31] Mechanism and Control of Asymmetric Floor Heave in the Gob-Side Coal Roadway under Mining Pressure in Extra-Thick Coal Seams
    Wang, Deqiu
    Zheng, Yun
    He, Fulian
    Song, Jiayu
    Zhang, Jianlong
    Wu, Yanhao
    Jia, Pengpeng
    Wang, Xiaohui
    Liu, Baoping
    Wang, Feifei
    Zhang, Yajiang
    Tao, Kai
    ENERGIES, 2023, 16 (13)
  • [32] Study on reasonable advancing speed of fully-mechanized top-coal caving face in mining contugous extra-thick coal seams in rockburst mine
    Cui F.
    Feng G.
    Jia C.
    Zhang S.
    Sun J.
    Meitan Kexue Jishu/Coal Science and Technology (Peking), 2023, 51 (07): : 287 - 297
  • [33] Investigationand practice of the reasonablecutting height atlongwalltop coal caving face with super-large mining height inhard and extra-thick coal seams
    Xu Y.
    Wang G.
    Zhang C.
    Li M.
    Zhang J.
    Caikuang yu Anquan Gongcheng Xuebao/Journal of Mining and Safety Engineering, 2020, 37 (04): : 715 - 722
  • [34] Coal Burst Induced by Horizontal Section Mining of a Steeply Inclined, Extra-Thick Coal Seam and Its Prevention: A Case Study from Yaojie No. 3 Coal Mine, China
    Wang, Zhengyi
    Dou, Linming
    Wang, Guifeng
    SHOCK AND VIBRATION, 2019, 2019
  • [35] Pressure Relief Mechanism and Gas Extraction Method during the Mining of the Steep and Extra-Thick Coal Seam: A Case Study in the Yaojie No. 3 Coal Mine
    Zhang, Hao
    Xu, Lehua
    Yang, Mengmeng
    Deng, Cunbao
    Cheng, Yuanping
    ENERGIES, 2022, 15 (10)
  • [36] Study of automated top-coal caving in extra-thick coal seams using the continuum-discontinuum element method
    Zhang, Qunlei
    Yue, Jinchao
    Liu, Chuang
    Feng, Chun
    Li, Huamin
    INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES, 2019, 122
  • [37] STUDY ON EVOLUTION CHARACTERISTICS OF OVERBURDEN CAVING AND VOID DURING MULTI-HORIZONTAL SECTIONAL MINING IN STEEPLY INCLINED COAL SEAMS
    Yang, Wen-Hua
    Lai, Xin-Ping
    Cao, Jian-Tao
    Xu, Hui-Cong
    Fang, Xian-Wei
    THERMAL SCIENCE, 2020, 24 (06): : 3915 - 3921
  • [38] Study on overburden failure characteristics in deep thick loose seam and thick coal seam mining
    Liu, Weitao
    Pang, Lifu
    Xu, Baichao
    Sun, Xi
    GEOMATICS NATURAL HAZARDS & RISK, 2020, 11 (01) : 632 - 653
  • [39] Study on influencing factors of gas emission in horizontal sub-level mining face of steeply inclined and extra-thick coal seam
    Chen J.
    Wang S.
    Liu X.
    Zheng S.
    Wang G.
    Sun L.
    Meitan Kexue Jishu/Coal Science and Technology (Peking), 2022, 50 (03): : 127 - 135
  • [40] Case study on the mining-induced stress evolution of an extra-thick coal seam under hard roof conditions
    Li, Cong
    Xie, Heping
    Gao, Mingzhong
    Xie, Jing
    Deng, Guangdi
    He, Zhiqiang
    ENERGY SCIENCE & ENGINEERING, 2020, 8 (09) : 3174 - 3185