Study on Overburden Structure Characteristics and Induced Scour Mechanisms of Horizontal Sublevel Mining in Steep and Extra-Thick Coal Seams

被引:2
|
作者
Ge, Shiguo [1 ]
Yuan, Chongliang [2 ]
Chang, Qingliang [1 ,3 ]
Wang, Yongzhong [2 ]
Zhang, Biao [1 ,3 ]
机构
[1] China Univ Min & Technol, Sch Mines, Xuzhou 221116, Jiangsu, Peoples R China
[2] Yaojie Coal Power Grp Co Ltd, Lanzhou 730080, Peoples R China
[3] State Key Lab Coal Resources & Safe Min, Xuzhou 221116, Jiangsu, Peoples R China
基金
中国国家自然科学基金;
关键词
steep thick; horizontal segmentation; induced scour mechanism; articulated rock beam;
D O I
10.3390/su141911980
中图分类号
X [环境科学、安全科学];
学科分类号
08 ; 0830 ;
摘要
In order to study the space-time evolution law and the induced impact mechanism of overburden breaking in the tangential horizontal sublevel during the fully mechanized mining of extra-thick and steep coal seams, we took the Yaojie No. 3 mine as an example. Through the establishment of an overburden breaking mechanical model, the structural characteristics of hinged rock beams after overburden breaking and the space-time evolution law of overburden structure instability were analyzed, the static and dynamic load conditions that induce rockbursts were analyzed, and the induced impact mechanism of dynamic and static load superposition was revealed. Our research showed that, due to the asymmetry of the roof and floor, the coal body in the working face is in the strong shear stress zone at the end of the air inlet roadway, which easily produces shear failure. The lateral support pressure and the shear stress of the coal body in the goaf are the static load sources of the rockburst in the steep coal seam; after the roof overburden is broken, a hinge-bearing structure is formed under the support of the sliding force of the fault block and the floating gangue in the goaf. When the coal is mined in the lower section, the strong dynamic load formed by the impact of the fault block on the topmost coal is the main dynamic load source of the impact on the working face. Under the superpositions of the dynamic load and static load, the coal and rock lose stability and release energy in a large range, generating dynamic and static superimposed rockbursts. Furthermore, the internal mechanism of the occurrence of rockbursts during the mining of steep and extra-thick coal seams in the Yaojie No. 3 coal mine was revealed. The static load of the coal body comes from the clamping actions of the roof and floor, and the dynamic impact load comes from the clamping structure's instability. The reason for the occurrence of rockbursts in the mining of steep and extra-thick coal seams in the Yaojie No. 3 coal mine was reasonably explained.
引用
收藏
页数:15
相关论文
共 50 条
  • [1] Application of RFPA2D in sublevel caving mining extra-thick coal seams
    Nan, Hua
    Xu, Tao
    Wei, Zhidong
    PHYSICAL AND NUMERICAL SIMULATION OF MATERIALS PROCESSING, PTS 1 AND 2, 2008, 575-578 : 1246 - +
  • [2] Study on bearing characteristics of filling paste and coal in steeply inclined extra-thick coal seams with large mining height and horizontal stratification
    Chang, Qingliang
    Leng, Qiang
    Yuan, Chongliang
    Zhou, Huaqiang
    Zhang, Biao
    Caikuang yu Anquan Gongcheng Xuebao/Journal of Mining and Safety Engineering, 2021, 38 (05): : 919 - 928
  • [3] Study on underlying coal seam stress distribution and failure characteristics in slicing mining of extra-thick coal seams
    Gao J.
    Cai H.
    Lu F.
    Wang W.
    Meitan Kexue Jishu/Coal Science and Technology (Peking), 2021, 49 (05): : 19 - 26
  • [4] Study on the linkage mechanism between key strata fracture in overburden and surface subsidence during caving mining in extra-thick coal seams
    Lan, Tianwei
    Zhang, Zhijia
    Guo, Weiqiang
    Li, Zhu
    Wu, Guoqiang
    Fang, Ping
    SCIENTIFIC REPORTS, 2025, 15 (01):
  • [5] Study on failure characteristics of overburden in extra thick coal seam mining
    Chang Liu
    Pingsong Zhang
    Duoxi Yao
    Yuanchao Ou
    Yutong Tian
    Environmental Earth Sciences, 2022, 81
  • [6] Study on failure characteristics of overburden in extra thick coal seam mining
    Liu, Chang
    Zhang, Pingsong
    Yao, Duoxi
    Ou, Yuanchao
    Tian, Yutong
    ENVIRONMENTAL EARTH SCIENCES, 2022, 81 (19)
  • [7] A case study of floor failure characteristics under fully mechanised caving mining conditions in extra-thick coal seams
    Zhang, Pingsong
    Ou, Yuanchao
    Sun, Binyang
    Liu, Chang
    JOURNAL OF GEOPHYSICS AND ENGINEERING, 2020, 17 (05) : 813 - 826
  • [8] Research on the overburden deformation and migration law in deep and extra-thick coal seam mining
    Sun, Binyang
    Zhang, Pingsong
    Wu, Rongxin
    Fu, Maoru
    Ou, Yuanchao
    JOURNAL OF APPLIED GEOPHYSICS, 2021, 190
  • [9] The Key Stratum Structure Morphology of Longwall Mechanized Top Coal Caving Mining in Extra-Thick Coal Seams: A Typical Case Study
    He, Fulian
    Li, Xiaobin
    He, Wenrui
    Zhao, Yongqiang
    Xu, Zhuhe
    Li, Quansheng
    ADVANCES IN CIVIL ENGINEERING, 2020, 2020
  • [10] Study on Dynamic Failure Characteristics of Coal and Rock in Stope Induced by Dynamic Load of Steep Horizontal Sublevel Mining
    Wang, Yongzhong
    Yuan, Chongliang
    Shi, Xianyuan
    Chang, Qingliang
    Zhang, Biao
    PROCESSES, 2022, 10 (09)