Influences of Polymer Fiber and Polymer Latex on Physical Properties of Cement Mortar

被引：1
|
作者：
Song, Shenghui [1 ]
Liu, Futian [1 ]
机构：
[1] Univ Jinan, Sch Mat Sci & Engn, Jinan 250022, Peoples R China
来源：
EMERGING FOCUS ON ADVANCED MATERIALS, PTS 1 AND 2 | 2011年 / 306-307卷
关键词：
Polymer modified cement mortar; fibre reinforced cement mortar; toughness; bondability; microstructure;
D O I：
10.4028/www.scientific.net/AMR.306-307.814
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Two kinds of polymer fiber and polymer latex are used to improve the toughness and bondability of cement mortar. The influences of the fiber and latex on the compressive and flexural strength, compressive strength-flexural strength ratio (CS/FS), bond flexural strength and compactedness of the hardened mortar were studied. The results showed that both of the latex and fibre can improve the compressive and flexural strength of mortar in low content, decrease the CS/FS, and then improve the toughness significantly. The bond flexural strength of mortar can be improved by 40-50% when the latex is added. The effect of fibre-latex added together was better than that of two matters added separately. The optimized components for Fibre-Latex hybrid were: 0.28% of PVA+5% of ACE.
引用
收藏
页码：814 / 818
页数：5
相关论文
共 50 条
  • [21] Proportioning Design and Mechanical Properties Research of Polypropylene Fiber and Polymer Emulsion Reinforced Cement Mortar
    Li, Guo-zhong
    Zhao, Shuai
    JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 2010, 22 (03) : 223 - 226
  • [22] Influences of Processing and Testing Conditions on Flexural Behavior of Fiber-reinforced Polymer-modified Cement Mortar
    Chen, Weideng
    Zhong, Shiyun
    PROGRESS IN POLYMERS IN CONCRETE, 2013, 687 : 502 - +
  • [23] Hydration and Physical Properties of Polymer Modified Cement Mortar Containing Superfine Blast Furnace Slag
    Cho, Jin-Sang
    Park, Jin-Koo
    Yu, Young-Hwan
    Choi, Moon-Kwan
    Yeon, Kyu-Seok
    Hyun, Sang-Hoon
    PROCEEDINGS OF THE 6TH ASIAN SYMPOSIUM ON POLYMERS IN CONCRETE, 2009, : 319 - 324
  • [24] Polymer Additives in Cement and Mortar.
    Rodriguez, G.
    Construction, 1973, 28 (03): : 86 - 95
  • [25] New polymer additives for mortar cement
    Chu, SG
    Podlas, TJ
    Young, TS
    MASONRY: MATERIALS, TESTING, AND APPLICATIONS, 1999, 1356 : 1 - 12
  • [26] Research of the Content of Polymer's Detection in Polymer Cement Mortar
    Ding, Rui
    Xiao, Liguang
    Ruan, Jiongzheng
    Li, Qiang
    PROCEEDINGS OF THE 6TH ASIAN SYMPOSIUM ON POLYMERS IN CONCRETE, 2009, : 484 - 489
  • [27] Modification of cement mortars by polymer latex
    Sumathy, CT
    Dharakumar, M
    Devi, MS
    Saccubai, S
    JOURNAL OF APPLIED POLYMER SCIENCE, 1997, 63 (10) : 1251 - 1257
  • [28] Effect of polymer cement modifiers on mechanical and physical properties of polymer-modified mortar using recycled waste concrete fine aggregate
    Eui-Hwan, Hwang
    Ko, Young Soo
    Jeon, Jong-Ki
    JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY, 2007, 13 (03) : 387 - 394
  • [29] Effect of mixing ratio on fire resistance of cement mortar with polypropylene fiber and polymer
    Jeon, Kisoo
    Jeon, Chansoo
    Choi, Wonyoung
    CASE STUDIES IN CONSTRUCTION MATERIALS, 2023, 19
  • [30] Effect of superabsorbent polymer admixtures on hygric and thermal properties of cement mortar
    Fort, Jan
    Hotek, Petr
    Mildner, Martin
    Krejsova, Jitka
    Cerny, Robert
    12TH NORDIC SYMPOSIUM ON BUILDING PHYSICS (NSB 2020), 2020, 172
12345