Conversion of a Commercial 3-Axis Milling Machine into a 3D Printer

被引：0

作者：

Badger, Paul ^{[1
]}

Yarmeak, Gary ^{[2
]}

Sirinterlikci, Arif ^{[3
,4
]}

机构：

[1] Robert Morris Univ, Moon, PA 15108 USA

[2] RMU Engn Dept, Moon, PA USA

[3] Robert Morris Univ, Ind & Mfg Engn, Moon, PA USA

[4] Robert Morris Univ, Engn, Moon, PA USA

来源：

JOURNAL OF ENGINEERING TECHNOLOGY | 2016年 / 33卷 / 02期

关键词：

D O I：

暂无

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This paper explains the authors work in converting a commercial 3-axis milling machine into a 3D printer., The technology behind the printer is the fused filament fabrication process, a variant of fused deposition modeling. The paper details the added components for the conversion including the tooling mount for the extruder, the extruder and temperature controls as well as modification to the motion controller card for the 4th axis used in the extrusion process, and the challenge of incorporating software changes and additions in making the conversion successful. The paper concludes with cost estimation figures and printer performance results.

引用

页码：40 / 48

页数：9

共 50 条

[21] Study on simulation system for 3-axis NC milling
Ming, Z
Li, JG
Yuang, ZJ
Tan, JB
[J]. PROCEEDINGS OF THE 1996 IEEE IECON - 22ND INTERNATIONAL CONFERENCE ON INDUSTRIAL ELECTRONICS, CONTROL, AND INSTRUMENTATION, VOLS 1-3, 1996, : 637 - 640
[22] Geometric contributions to 3-axis milling of sculptured surfaces
Wallner, J
Glaeser, G
Pottmann, H
[J]. MACHINING IMPOSSIBLE SHAPES, 1999, 18 : 33 - 41
[23] Error Compensation for 3-axis Machine Tools
Pan, Fang-yu
Nie, Li
Bai, Yue-wei
Wang, Xiao-gang
Liu, Kai
Wu, Xiao-yan
[J]. INTERNATIONAL CONFERENCE ON COMPUTER, MECHATRONICS AND ELECTRONIC ENGINEERING (CMEE 2016), 2016,
[24] Patient-Specific 3D Printed Models of Renal Tumours Using Home-Made 3D Printer in Comparison with Commercial 3D Printer
Liu, Dongting
Sun, Zhonghua
Chaichana, Thanapong
Ducke, Werner
Fan, Zhanming
[J]. JOURNAL OF MEDICAL IMAGING AND HEALTH INFORMATICS, 2018, 8 (02) : 303 - 308
[25] Development of a 3-axis Parallel Kinematic Machine for Milling Wood Material - Part 1: Design
Ayyildiz, Elmas Askar
Ayyildiz, Mustafa
[J]. BIORESOURCES, 2017, 12 (04): : 9326 - 9337
[26] Design of a Meso-scale 3-axis Milling with Nanometer
Fan, Kuang-Chao
Shiou, Fang-Jung
Pan, Kai-Ming
Ke, Zhi-Yuan
Lin, Yjng-Jhih
Wu, Kun-Jin
[J]. PROCEEDINGS OF THE 36TH INTERNATIONAL MATADOR CONFERENCE, 2010, : 161 - 164
[27] An Algorithm for Determining the Optimal Cutter Length in 3-Axis Milling
Huang, Wenli
Inui, Masatomo
[J]. 2009 IEEE INTERNATIONAL CONFERENCE ON MECHATRONICS AND AUTOMATION, VOLS 1-7, CONFERENCE PROCEEDINGS, 2009, : 1979 - +
[28] Clustering Of Machinable Volumes For Tool Selection In 3-axis Milling
Krishnamurthy, Hariharan
Bhonge, Manoj W.
Chakraborty, Tathagata
[J]. Computer-Aided Design and Applications, 2023, 20 (02): : 306 - 321
[29] ADAPTIVE TOOLPATH FOR 3-AXIS MILLING OF THIN WALLED PARTS
Grossi, N.
Scippa, A.
Croppi, L.
Morelli, L.
Campatelli, G.
[J]. MM SCIENCE JOURNAL, 2019, 2019 : 3378 - 3385
[30] FREEFORM SURFACE REGION OPTIMIZATION FOR 3-AXIS AND 5-AXIS MILLING
ELBER, G
[J]. COMPUTER-AIDED DESIGN, 1995, 27 (06) : 465 - 470

← 1 2 3 4 5 →