Drying of porous materials at low moisture content

被引:10
|
作者
Plumb, OA [1 ]
Gu, LM
Webb, SW
机构
[1] Washington State Univ, Sch Mech & Mat Engn, Pullman, WA 99164 USA
[2] Sandia Natl Labs, Mission Anal & Simulat Dept, Albuquerque, NM 87185 USA
关键词
porous materials; vapor phase diffusion; enhanced vapor diffusion;
D O I
10.1080/07373939908917669
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
Drying experiments were conducted using packed beds of glass beads with initial moisture content near or slightly above the irreducible moisture content. The objective was to validate the vapor phase diffusion coefficient determined in earlier experiments and to quantify the effect of temperature gradient on vapor phase diffusion in the presence of irreducible saturation. The results indicate that for isothermal drying the enhancement factor, beta, which is the ratio of the diffusion coefficient in the packed bed to that in free space, is slightly less than unity. This is consistent with previous results. However, the results for non-isothermal drying show little effect of temperature gradient for temperature gradients either assisting the concentration gradient or opposing the concentration gradient. This is contrary to the traditional thinking about enhanced vapor diffusion originally proposed by Philip and deVries (1957).
引用
收藏
页码:1999 / 2011
页数:13
相关论文
共 50 条
  • [31] Energetic Analysis of Drying Biological Materials with High Moisture Content by Using Microwave Energy
    Kurjak, Zoltan
    Barhacs, Attila
    Beke, Janos
    [J]. DRYING TECHNOLOGY, 2012, 30 (03) : 312 - 319
  • [32] Application of the Luikov's Model in the Moisture Content Measurement of Solid Materials by the Drying Method
    Martines-Lopez, E.
    Lira-Cortes, L.
    [J]. INTERNATIONAL JOURNAL OF THERMOPHYSICS, 2019, 40 (01)
  • [33] Porous silicon in low moisture content dry gas by impedance spectroscopy
    Islam, T.
    Hussain, S.
    Gangopadhyay, A.
    Islam, S. S.
    Harsh
    [J]. PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE, 2011, 208 (06): : 1475 - 1479
  • [34] DRYING EQUATION FOR HIGH MOISTURE MATERIALS
    BUNN, JM
    WALTON, LR
    HENSON, WH
    [J]. JOURNAL OF AGRICULTURAL ENGINEERING RESEARCH, 1972, 17 (04): : 343 - &
  • [35] Calculation of Moisture Content and Drying Rate during Microwave Drying
    Moghanaki, S. Khani
    Khoshandam, B.
    Mirhaj, M. H.
    [J]. APPLIED MATERIALS AND TECHNOLOGIES FOR MODERN MANUFACTURING, PTS 1-4, 2013, 423-426 : 746 - 749
  • [36] MICROWAVE DRYING OF POROUS MATERIALS
    LEFEUVRE, S
    [J]. PHYSICS IN TECHNOLOGY, 1981, 12 (04): : 155 - &
  • [37] Microwave drying of porous materials
    Araszkiewicz, M
    Koziol, A
    Oskwarek, A
    Lupinski, AC
    [J]. DRYING TECHNOLOGY, 2004, 22 (10) : 2331 - 2341
  • [38] Determination of particle density and porosity in foods and porous materials with high moisture content
    Sereno, Alberto M.
    [J]. INTERNATIONAL JOURNAL OF FOOD PROPERTIES, 2007, 10 (03) : 455 - 469
  • [39] ACTIVE THERMAL MONITORING OF TF IE MOISTURE-CONTENT OF POROUS MATERIALS
    VAVILOV, VP
    BIZON, P
    BRESSAN, K
    GRINZATO, E
    IVANOV, AI
    KOVALEVA, O
    MARINETTI, S
    NEDAVNII, OI
    [J]. RUSSIAN JOURNAL OF NONDESTRUCTIVE TESTING, 1994, 30 (05) : 390 - 397
  • [40] Comparison of salt solution and air drying methods for moisture fixation in highly porous building materials
    Antonov, Yovko Ivanov
    Jensen, Rasmus Lund
    Moldrup, Per
    Pomianowski, Michal
    [J]. 11TH NORDIC SYMPOSIUM ON BUILDING PHYSICS (NSB2017), 2017, 132 : 189 - 194