A Comparative Investigation of Drilling and Milling Micro Holes Using Micro-EDM

被引：0
|
作者：
Li, Yiquan [1 ]
Hou, Wanwu [1 ]
Xu, Jinkai [1 ]
Yu, Huadong [1 ]
机构：
[1] Changchun Univ Sci & Technol, Coll Mech & Elect Engn, Changchun, Jilin Province, Peoples R China
来源：
2016 6TH IEEE INTERNATIONAL CONFERENCE ON MANIPULATION, MANUFACTURING AND MEASUREMENT ON THE NANOSCALE (IEEE 3M-NANO) | 2016年
关键词：
micro-EDM; drilling; milling; depth to diameter ratio; rotate speed; DEEP HOLE;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Micro Electrical Discharge Machining (micro-EDM), is one of the most important technologies for the machining of difficult-to-cut materials, and it can be considered as one of the most promising manufacturing process for fabricating micro holes. Micro-EDM is suitable for machining micro holes, while it is still hard to machining holes with high depth. The study will make a research on drilling and milling holes using micro-EDM, the milling process shows better performance especially for the holes with high depth to diameter ratio; while drilling process could gain higher processing speed and better geometrical properties of the micro-holes.
引用
收藏
页码：212 / 216
页数：5
相关论文
共 50 条
  • [1] An Investigation on Drilling Micro Holes in Different Processes using Micro-EDM
    Li, Yiquan
    Hou, Wanwu
    Xu, Jinkai
    Yu, Huadong
    [J]. 2016 IEEE INTERNATIONAL CONFERENCE ON MECHATRONICS AND AUTOMATION, 2016, : 1283 - 1288
  • [2] Drilling of Micro-holes in Titanium Using Micro-EDM: A Parametric Investigation
    Kar, Siddhartha
    Sarmah, Pallab
    Baroi, Binoy Kumar
    Patowari, Promod Kumar
    [J]. ADVANCES IN MECHANICAL ENGINEERING, ICRIDME 2018, 2020, : 589 - 600
  • [3] Drilling an Array of Square Micro-holes Using Micro-EDM
    Debnath, Tapas
    Patowari, Promod Kumar
    [J]. ADVANCES IN MECHANICAL ENGINEERING, ICRIDME 2018, 2020, : 527 - 537
  • [4] Micro-EDM drilling of tapered holes for industrial applications
    Diver, C
    Atkinson, J
    Helml, HJ
    Li, L
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2004, 149 (1-3) : 296 - 303
  • [5] Enhancement of the micro-EDM process for drilling through-holes
    Bellotti, Mattia
    Qian, Jun
    Reynaerts, Dominiek
    [J]. 19TH CIRP CONFERENCE ON ELECTRO PHYSICAL AND CHEMICAL MACHINING, 2018, 68 : 610 - 615
  • [6] Micro-EDM milling of micro platinum hemisphere
    Hang, Guanrong
    Cao, Guohui
    Wang, Zaicheng
    Tang, Jing
    Wang, Zhenlong
    Zhao, Wansheng
    [J]. 2006 1ST IEEE INTERNATIONAL CONFERENCE ON NANO/MICRO ENGINEERED AND MOLECULAR SYSTEMS, VOLS 1-3, 2006, : 579 - +
  • [7] INVESTIGATING THE MICRO-EDM MACHINABILITY OF BULK METALLIC GLASS IN MICRO-EDM DRILLING
    Liu, Chong
    Rashid, Asif
    Jahan, Muhammad P.
    Ma, Jianfeng
    [J]. PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2019, VOL 2A, 2019,
  • [8] Orbital electrode actuation to improve efficiency of drilling micro-holes by micro-EDM
    Bamberg, Eberhard
    Heamawatanachai, Sumet
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2009, 209 (04) : 1826 - 1834
  • [9] Comparison of Micro-milling and Micro-EDM Operations
    Vanderauwera, W.
    Garzon, M.
    Aerts, T.
    Klocke, F.
    Lauwers, B.
    [J]. PROCEEDINGS OF THE 8TH INTERNATIONAL CONFERENCE ON MULTI-MATERIAL MICRO MANUFACTURE (4M 2011), 2011, : 285 - 289
  • [10] Properties of micro-holes for nozzle by micro-EDM
    Cusanelli, G.
    Minello, M.
    Torchia, F.
    Ammann, W.
    Grize, P. -E.
    [J]. PROCEEDINGS OF THE 15TH INTERNATIONAL SYMPOSIUM ON ELECTROMACHINING, 2007, : 241 - 245
12345