Numerical Simulation of Flow Field Using Swirling Flow Nozzle in Continuous Casting Billet Mould

被引：0

作者：

Yu Zhan ^{[1
]}

Lei Zuo-sheng ^{[1
]}

Jia Hong-hai ^{[1
]}

Deng Kang ^{[1
]}

Chen Jia-chang ^{[2
]}

Hua Wen-jie ^{[2
]}

Ren Zhong-ming ^{[1
]}

机构：

[1] Shanghai Univ, Sch Mat Sci & Engn, Shanghai 200072, Peoples R China

[2] Baosteel Grp, Special Steel Branch, Shanghai 200936, Peoples R China

来源：

JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL | 2008年 / 15卷

关键词：

straight nozzle; swirling flow nozzle; penetration depth; circulation regions;

D O I：

暂无

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

The physical and numerical modeling was carried out to study the flow patterns using swirling flow nozzle in continuous casting billet mould, the influence of the angles and locations of the blade on flow patterns in the mould was analyzed. The results showed that the flow patterns in mould was uniformed and the upper circulation regions were observed with swirling flow nozzle; the penetration depth of swirling fluid was decreased and the upper circulating regions moved upward with the blade angle reducing, and the lower circulation regions were observed in the case of 60 degrees blade angle; the penetration depth of swirling flow was increased with the distance increasing between the blade and the outlet.

引用

页码：554 / 557

页数：4

共 50 条

[11] Experimental Validation and Numerical Analysis of the Swirling Flow in a Submerged Entry Nozzle and Mold by Using a Reverse TurboSwirl in a Billet Continuous Casting Process
Bai, Haitong
Ersson, Mikael
Jonsson, Par
[J]. STEEL RESEARCH INTERNATIONAL, 2017, 88 (07)
[12] Numerical Simulation of the Flow Field in an Ultrahigh-Speed Continuous Casting Billet Mold
Qiu, Dejin
Zhang, Zhaohui
Li, Xintao
Lv, Ming
Mi, Xiaoyu
Xi, Xiaofeng
[J]. METALS, 2023, 13 (05)
[13] NUMERICAL STUDY OF IMMERSION NOZZLE CUTLET FLOW PATTERN WITH SWIRLING FLOW IN CONTINUOUS-CASTING
YOKOYA, S
WESTOFF, R
ASAKO, Y
HARA, S
SZEKELY, J
[J]. ISIJ INTERNATIONAL, 1994, 34 (11) : 889 - 895
[14] Numerical simulation on fluid flow in mould for slab continuous casting
Ma, Fanjun
Wen, Guanghua
Li, Gang
[J]. Jinshu Xuebao/Acta Metallurgica Sinica, 2000, 36 (04): : 399 - 402
[15] Effects of Electromagnetic Swirling Flow in Submerged Entry Nozzle on Square Billet Continuous Casting of Steel Process
Li, Dewei
Su, Zhijian
Chen, Jin
Wang, Qiang
Yang, Ying
Nakajima, Keiji
Marukawa, Katsukiyo
He, Jicheng
[J]. ISIJ INTERNATIONAL, 2013, 53 (07) : 1187 - 1194
[16] NUMERICAL-ANALYSIS OF IMMERSION NOZZLE OUTLET FLOW PATTERN THROUGH USING SWIRLING FLOW IN CONTINUOUS-CASTING
WESTHOFF, R
WESTHOFF, R
ASAKO, Y
HARA, S
SZEKELY, J
[J]. TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1994, 80 (10): : 759 - 764
[17] Optimisation of electromagnetic field and flow field in round billet continuous casting mould with electromagnetic stirring
Geng, X.
Li, X.
Liu, F. B.
Li, H. B.
Jiang, Z. H.
[J]. IRONMAKING & STEELMAKING, 2015, 42 (09) : 675 - 682
[18] Numerical Simulation and Experimental Verification of Flow Field of Multiple Swirling Nozzle
Lei, Li
Dai, Xiaodong
[J]. JOURNAL OF APPLIED SCIENCE AND ENGINEERING, 2019, 22 (01): : 135 - 144
[19] Novel Opposite Stirring Mode in Bloom Continuous Casting Mould by Combining Swirling Flow Nozzle with EMS
Sun, Haibo
Li, Liejun
Liu, Chengbin
[J]. METALS, 2018, 8 (10):
[20] CONTROL OF IMMERSION NOZZLE OUTLET FLOW PATTERN BY USING SWIRLING FLOW IN CONTINUOUS-CASTING
YOKOYA, S
ASAKO, Y
HARA, S
SZEKELY, J
[J]. TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1994, 80 (10): : 754 - 758

← 1 2 3 4 5 →