Modifying surface properties of polyamide powders for selective laser sintering

被引：0
|
作者：
Lyakhovich, A. M. [1 ]
Kashapov, R. N. [1 ,2 ]
Kashapov, N. F. [1 ]
Kashapov, L. N. [1 ,3 ]
机构：
[1] Kazan Fed Univ, Engn Inst, Kazan 420008, Russia
[2] Russian Acad Sci, FRC Kazan Sci Ctr, Zavoisky Phys Tech Inst, Lab Radiat Phys, Kazan 420029, Russia
[3] Russian Acad Sci, FRC Kazan Sci Ctr, Inst Mech & Engn, Lab Continuum Mech, Kazan 420111, Russia
来源：
INTERNATIONAL SCIENTIFIC-TECHNICAL CONFERENCE ON INNOVATIVE ENGINEERING TECHNOLOGIES, EQUIPMENT AND MATERIALS 2018 (ISTC-IETEM-2018) | 2019年 / 570卷
关键词：
D O I：
10.1088/1757-899X/570/1/012066
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The purpose of this work was determination of the changes in surface properties of Polyamide-12 powder used in Selective Laser Sintering (SLS). The powders of original polyamide Duraform PA(tm) (3D Systems) were investigated. Also the powders remaining around the product after the sintering process were investigated. The difference in the chemical structure of the Polyamide-12 powder surface layers has been established. The reason is the increased content of oxygen-containing groups in the surface layers. To a greater extent, this difference was revealed for powders left after sintering and intended for reuse. Aliphatic chains are subject to oxidative degradation in the surface layers of the original powder. In the powder remaining after sintering, terminal carbonyl and amine groups are subject to oxidative degradation.
引用
收藏
页数：7
相关论文
共 50 条
  • [21] Investigations on Mechanical Properties of Polyamide Parts Fabricated by Selective Laser Sintering Process
    Sharma, Vishal
    Singh, Jaiinderpreet
    Sharma, Vishal S.
    Sachdeva, Anish
    Gupta, Munish Kumar
    Singh, Sharanjit
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2022, 31 (07) : 5767 - 5781
  • [22] Polymer Powders for Selective Laser Sintering (SLS)
    Schmid, Manfred
    Amado, Antonio
    Wegener, Konrad
    PROCEEDINGS OF PPS-30: THE 30TH INTERNATIONAL CONFERENCE OF THE POLYMER PROCESSING SOCIETY, 2015, 1664
  • [23] Selective laser sintering of PZT ceramic powders
    D. M. Gureev
    R. V. Ruzhechko
    I. V. Shishkovskii
    Technical Physics Letters, 2000, 26 : 262 - 264
  • [24] Selective laser sintering of PZT ceramic powders
    Gureev, DM
    Ruzhechko, RV
    Shishkovsky, IV
    TECHNICAL PHYSICS LETTERS, 2000, 26 (03) : 262 - 264
  • [25] Morphology of polymeric powders in Laser Sintering (LS): From Polyamide to new PEEK powders
    Berretta, S.
    Ghita, O.
    Evans, K. E.
    EUROPEAN POLYMER JOURNAL, 2014, 59 : 218 - 229
  • [26] The effect of polyamide particles on the processibility of selective laser sintering
    Lim, Byung-Seok
    Kim, Hyung-Il
    Kim, Dong-Soo
    Bang, Young-Kil
    INTERNATIONAL JOURNAL OF MODERN PHYSICS B, 2008, 22 (9-11): : 1827 - 1832
  • [27] Morphology of polymeric powders in Laser Sintering (LS): From Polyamide to new PEEK powders
    Berretta, S. (sb508@exeter.ac.uk), 1600, Elsevier Ltd (59):
  • [28] A process control and interlayer heating approach to reuse polyamide 12 powders and create parts with improved mechanical properties in selective laser sintering
    Yang, Feifei
    Jiang, Tianyu
    Lalier, Greg
    Bartolone, John
    Chen, Xu
    JOURNAL OF MANUFACTURING PROCESSES, 2020, 57 (57) : 828 - 846
  • [29] Processing behavior of polyamide nanocomposites for selective laser sintering
    Pearson, Raymond
    Esposito, Gabrielle
    Tanasarnsopaporn, Phacharapol
    Wang, Yuanyuan
    ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 2018, 256
  • [30] Selective Laser Sintering of Clay-Reinforced Polyamide
    Jain, Prashant K.
    Pandey, Pulak M.
    Rao, P. V. M.
    POLYMER COMPOSITES, 2010, 31 (04) : 732 - 743
12345