Finite Element Analysis and Optimizing Design of the Bus Body

被引：2
|
作者：
Zhi, Shuya [1 ]
Lu, Hongjun [2 ]
机构：
[1] Jingling Inst Technol, Nanjing 211169, Jiangsu, Peoples R China
[2] Nanjing Inst Ind Technol, Nanjing 210046, Jiangsu, Peoples R China
来源：
ADVANCES IN DESIGN TECHNOLOGY, VOLS 1 AND 2 | 2012年 / 215-216卷
关键词：
Bus body; Pro/E modeling; Finite element analysis; Optimization design;
D O I：
10.4028/www.scientific.net/AMM.215-216.78
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
To model one bus body based on shell element and put it into the finite element analysis ANSYS made the mechanics analysis Using Pro/e software. Exert bending, reverse load, etc and done the operation and calibration. Through to adjust body structure balanced each part stress of the body. Analyzed data and put forward reasonable improvement scheme for restarting the optimization design. Got the purpose of the Body quality being light with high strength, the material effective utilization rate dramatically been improved.
引用
收藏
页码：78 / +
页数：2
相关论文
共 50 条
  • [21] Optimizing stress distribution in dental air abrasion through design of experiments: a finite element analysis
    Chethan, K. N.
    Namlimhemnatee, Thanachai
    Padmaraj, N. H.
    Kumar, Saurabh
    Eram, Afiya
    Shetty, Nisha
    Bamrungwong, Joompon
    Keni, G. Laxmikant
    COGENT ENGINEERING, 2024, 11 (01):
  • [22] Application of Finite-Element Modeling Tools for Analysis and Design of AC Drive Power Bus Structures
    Tallam, Rangarajan M.
    Lukaszewski, Richard A.
    Solveson, Mark
    2009 IEEE INTERNATIONAL ELECTRIC MACHINES & DRIVES CONFERENCE, VOLS 1-3, 2009, : 543 - +
  • [23] Finite element analysis for wireless design
    MacNeal-Schwendler Corp, Milwaukee, United States
    Applied microwave magazine, 1996, 8 (02):
  • [24] STRESS AND DISPLACEMENT ANALYSIS OF A MODERN DESIGN LATHE BODY BY THE FINITE ELEMENT METHOD (FEM)
    Staniek, R.
    Gessner, A.
    Zielnica, J.
    Ptaszynski, W.
    Myszkowski, A.
    Ciszak, O.
    Stoic, A.
    METALURGIJA, 2012, 51 (01): : 51 - 54
  • [25] FINITE ELEMENT ANALYSIS FOR OPTIMIZING ANTENNA FOR MICROWAVE COAGULATION THERAPY
    Surita, Main
    Marwaha, A.
    Marwaha, S.
    JOURNAL OF ENGINEERING SCIENCE AND TECHNOLOGY, 2012, 7 (04) : 462 - 470
  • [26] Dynamic Analysis of Electric Bus Chassis Using Finite Element Method
    Kurdi, Ojo
    Haryanto, Ismoyo
    Haryadi, Gunawan Dwi
    Wildan, M.
    2018 5TH INTERNATIONAL CONFERENCE ON ELECTRIC VEHICULAR TECHNOLOGY (ICEVT), 2018, : 214 - 217
  • [27] Failure analysis of FRP sandwich bus panels by finite element method
    Wu, HC
    Mu, B
    Warnemuende, K
    COMPOSITES PART B-ENGINEERING, 2003, 34 (01) : 51 - 58
  • [28] Finite element modeling and simulation analysis on side impact of electric bus
    Wang, Z.-P. (wangzhenpo@bit.edu.cn), 1600, Beijing Institute of Technology (33):
  • [29] Finite Element Analysis on Head Injury of Child Occupants in City Bus
    Cui S.
    Ma W.
    Li H.
    He L.
    Lü W.
    Qiche Gongcheng/Automotive Engineering, 2021, 43 (03): : 414 - 420and428
  • [30] Tunnel support design with finite element analysis
    Louhenapessy, WG
    GEO-ENGINEERING FOR UNDERGROUND FACILITIES, 1999, (90): : 526 - 537
12345