Microstructure of fast tool servo machining on copper alloy

被引：13
|
作者：
Lu, Hong [1 ]
Choi, Soo-chang [2 ]
Lee, Sang-min [1 ]
Lee, Deug-woo [3 ]
机构：
[1] Pusan Natl Univ, Dept Nano Fus Technol, Miryang 627706, South Korea
[2] Korea Inst Machinery & Mat, Taejon 305343, South Korea
[3] Pusan Natl Univ, Dept Nano Mechatron Engn, Miryang 627706, South Korea
来源：
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA | 2012年 / 22卷
关键词：
fast tool servo; microstructure; piezoelectric; diamond machining; copper alloy; DESIGN;
D O I：
10.1016/S1003-6326(12)61810-X
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The development of the fast tool servo (FTS) for precision machining was investigated. The micron machining performance of a piezoelectric-assisted FTS on copper alloy was evaluated. The results indicate that the quality of the microstructure depends mainly on two important factors: the cutting speed (or spindle speed) and the driving frequency of the FTS. The excessive driving frequency increases the formation of burrs. The effect of the clearance angle of the diamond tool on the microstructure machining precision was also investigated.
引用
收藏
页码：S820 / S824
页数：5
相关论文
共 50 条
  • [31] Machining control of non-axisymmetric aspheric surface based on piezoelectric fast tool servo system
    Chang, Kuo-Ming
    Cheng, Jui-Liang
    Liu, Yung-Tien
    PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 2022, 76 : 160 - 172
  • [32] Study on the Performance of laser-assisted fast tool servo machining device for glass-ceramic
    Fan, Mingxu
    Zhou, Xiaoqin
    Chen, Shunfa
    Jiang, Shan
    Song, Jinzhou
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2024, 238 (6-7) : 1030 - 1040
  • [33] Diamond machining of sinusoidal grid surface using fast tool servo system for fabrication of hydrophobic surface
    Hong LU
    Deug-Woo LEE
    Sang-Min LEE
    Jeong-Woo PARK
    TransactionsofNonferrousMetalsSocietyofChina, 2012, 22(S3) (S3) : 787 - 792
  • [34] Study of the surface roughness and optimization of machining parameters during laser-assisted fast tool servo machining of glass-ceramic
    Fan, Mingxu
    Zhou, Xiaoqin
    Chen, Shunfa
    Jiang, Shan
    Song, Jinzhou
    SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES, 2023, 11 (02)
  • [35] Development of a fast tool servo for ultraprecision turning
    Tian, Yanling
    Zhang, Dawei
    Ruan, Honghui
    ADVANCES IN MATERIALS MANUFACTURING SCIENCE AND TECHNOLOGY II, 2006, 532-533 : 33 - +
  • [36] Design and Adaptive Terminal Sliding Mode Control of a Fast Tool Servo System for Diamond Machining of Freeform Surfaces
    Zhu, Wu-Le
    Yang, Xu
    Duan, Fang
    Zhu, Zhiwei
    Ju, Bing-Feng
    IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2019, 66 (06) : 4912 - 4922
  • [37] Characterization of surface defects in fast tool servo machining of microlens array using a pattern recognition and analysis method
    Cheung, C. F.
    Hu, K.
    Jiang, X. Q.
    Kong, L. B.
    MEASUREMENT, 2010, 43 (09) : 1240 - 1249
  • [38] Repetitive control of a rotary fast tool servo
    Calzaretta, JA
    Ludwick, SJ
    Byl, MF
    Trumper, DL
    CONTROL OF PRECISIONS SYSTEMS, PROCEEDINGS, 2001, : 94 - 97
  • [39] Tool path generation of slow tool servo for active control machining error
    Cai H.-B.
    Shi G.-Q.
    Jilin Daxue Xuebao (Gongxueban)/Journal of Jilin University (Engineering and Technology Edition), 2019, 49 (04): : 1221 - 1227
  • [40] High bandwidth fast tool servo control
    Lu, XD
    Trumper, DL
    PROCEEDINGS OF THE 2004 AMERICAN CONTROL CONFERENCE, VOLS 1-6, 2004, : 734 - 739
12345