Comparing the melt-spun nanostructured aluminum 6061 foils with conventional direct chill ingot

被引：22
|
作者：
Dehghani, K. [1 ]
Salehi, Maryam [1 ]
Salehi, Mina [1 ]
Aboutalebi, H. [1 ]
机构：
[1] Amirkabir Univ Technol, Dept Min & Met Engn, Tehran, Iran
来源：
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2008年 / 489卷 / 1-2期
关键词：
rapid solidification; nanostructure; Al alloy;
D O I：
10.1016/j.msea.2007.12.017
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The properties of nanostructured A16061 foils, produced by melt spinning technique at a cooling rate of about 10(7) K/s, were investigated using atomic force microscopy (AFM), scanning electron microscopy (SEM), X-ray diffraction pattern (XRD) and microhardness testing. The properties of nanostructured foils were then compared with those of direct-chill (DC) casting. The results show that the formation of nanoparticles Of Mg2Si (about 50 nm in radius), the nanograins of about 61.8 nm and the ultra-fine dendrites, having a nanoarm. spacing about 80-100 nm, can significantly refine the structure and, in turn, enhance the properties of nanostructured foils comparing to the DC cast ones. Besides, the produced nanodendrites can extremely lead to structure homogeneity. (C) 2007 Elsevier B.V. All rights reserved.
引用
收藏
页码：245 / 252
页数：8
相关论文
共 50 条
  • [31] Structure and properties of nanostructured aluminum A413.1 produced by melt spinning compared with ingot microstructure
    Salehi, M.
    Dehghani, K.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2008, 457 (1-2) : 357 - 361
  • [32] Structure and properties of nanostructured aluminum A413.1 produced by melt spinning compared with ingot microstructure
    Salehi, M.
    Dehghani, K.
    Journal of Alloys and Compounds, 2008, 457 (1-2): : 357 - 361
  • [33] Nanostructured melt-spun Sm(Co,Fe,Zr,B)7.5 alloys for high-temperature magnets
    Makridis, SS
    Litsardakis, G
    Efthimiadis, KG
    Papathanasiou, G
    Panagiotopoulos, I
    Höfinger, S
    Fidler, J
    Hadjipanayis, GC
    Niarchos, D
    IEEE TRANSACTIONS ON MAGNETICS, 2003, 39 (05) : 2869 - 2871
  • [34] Effect of casting speed on surface quality of horizontal direct chill casting 7075 aluminum alloy ingot
    Zhu, Qingfeng
    Zhao, Zhihao
    Cui, Jianzhong
    Wang, Xiangjie
    Qin, Ke
    ACTA METALLURGICA SINICA-ENGLISH LETTERS, 2011, 24 (05) : 399 - 404
  • [35] Effect of casting speed on surface quality of horizontal direct chill casting 7075 aluminum alloy ingot
    Qingfeng ZHU
    Acta Metallurgica Sinica(English Letters), 2011, 24 (05) : 399 - 404
  • [36] Direct joule heating of Nd-Fe-B based melt-spun powder and zinc binder
    Yamashita, F
    Hashimoto, S
    Sasaki, Y
    Fukunaga, H
    IEEE TRANSACTIONS ON MAGNETICS, 1999, 35 (05) : 3304 - 3306
  • [37] Morphological characteristic of the conventional and melt-spun Al-10Ni-5.6Cu (in wt.%) alloy
    Karakose, Ercan
    Keskin, Mustafa
    MATERIALS CHARACTERIZATION, 2009, 60 (12) : 1569 - 1577
  • [38] Microstructural evolution and improved hydrogenation-dehydrogenation kinetics of nanostructured melt-spun Mg-Ni-Mm alloys
    Wu, Y.
    Lototsky, M. V.
    Solberg, J. K.
    Yartys, V. A.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2011, 509 : S640 - S645
  • [39] Effect of the Intensity of Melt Shearing on the As Cast Structure of Direct Chill Cast 2024 Aluminum Alloy
    Liu, Xudong
    Zhu, Qingfeng
    Zuo, Yubo
    Zhu, Cheng
    Zhao, Zhihao
    Cui, Jianzhong
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2019, 50 (12): : 5727 - 5733
  • [40] Effect of the Intensity of Melt Shearing on the As Cast Structure of Direct Chill Cast 2024 Aluminum Alloy
    Xudong Liu
    Qingfeng Zhu
    Yubo Zuo
    Cheng Zhu
    Zhihao Zhao
    Jianzhong Cui
    Metallurgical and Materials Transactions A, 2019, 50 : 5727 - 5733
12345