Impact response of Napier fibre reinforced nanomodified epoxy composites

被引：0
|
作者：
Ramli, W. M. A. Wan [1 ]
Majid, M. S. Abdul [1 ]
Ridzuan, M. J. M. [1 ]
Amin, N. A. M. [1 ]
机构：
[1] Univ Malaysia Perlis, Sch Mechatron Engn, Mech Engn Programme, Pauh Putra Campus, Arau 02600, Perlis, Malaysia
来源：
6TH INTERNATIONAL CONFERENCE ON APPLICATIONS AND DESIGN IN MECHANICAL ENGINEERING | 2019年 / 670卷
关键词：
Composites; nanoclay; alkali treatment; impact properties; natural fibre;
D O I：
10.1088/1757-899X/670/1/012050
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The effects of nanoclay filler content on the impact properties of Napier fibre reinforced epoxy composites were investigated. The natural fibre based composites were fabricated using either untreated or 5% alkali-treated Napier fibre along with nanomodified epoxy resin which consists of various nanoclay filler contents which were 0, 3, 5 and 10 wt%. The composites were manufactured using cold compression moulding process. Morphological analysis was then conducted to further analyse the fractured specimens following the impact test. The maximum impact properties were recorded by the treated Napier fibre reinforced nanomodified epoxy with 3 wt% of nanoclay filler content. The SEM image of the Napier fibre reinforced nanomodified epoxy composites at the optimal nanofiller content also exhibited excellent interfacial adhesion between the epoxy matrix and the fibre reinforcement.
引用
收藏
页数：5
相关论文
共 50 条
  • [11] Erosion of Glass Fibre reinforced Epoxy Composites
    Atia, A. M.
    Ali, W. Y.
    KGK-KAUTSCHUK GUMMI KUNSTSTOFFE, 2018, 71 (04): : 22 - 27
  • [12] Flexural properties of hybrid synthetic/Napier fibres reinforced epoxy composites
    Ridzuan, M. J. M.
    Majid, M. S. Abdul
    Khasri, A.
    Tajul, L.
    Cheng, E. M.
    6TH INTERNATIONAL CONFERENCE ON APPLICATIONS AND DESIGN IN MECHANICAL ENGINEERING, 2019, 670
  • [13] Impact and flexural properties of hybrid jute/HTPET fibre reinforced epoxy composites
    Ahmadi, M. S.
    Dastan, T.
    INDIAN JOURNAL OF FIBRE & TEXTILE RESEARCH, 2017, 42 (03) : 307 - 311
  • [14] Impact behaviour of nanomodified deflection-hardening fibre-reinforced concretes
    Demirhan, Serhat
    Yildirim, Gurkan
    Banyhussan, Qais Sahib
    Koca, Kemal
    Anil, Ozgur
    Erdem, Recep Tugrul
    Sahmaran, Mustafa
    MAGAZINE OF CONCRETE RESEARCH, 2020, 72 (17) : 865 - 887
  • [15] Analysis of mechanical properties anisotropy of nanomodified carbon fibre-reinforced woven composites
    Ruslantsev, A. N.
    Portnova, Ya M.
    Tairova, L. P.
    Dumansky, A. M.
    4TH INTERNATIONAL CONFERENCE ON ADVANCED COMPOSITES AND MATERIALS TECHNOLOGIES FOR ARDUOUS APPLICATIONS (ACMTAA), 2016, 153
  • [16] Tensile Strength of Untreated Napier Grass Fibre Reinforced Unsaturated Polyester Composites
    Haameem, M. J. A.
    Majid, M. S. Abdul
    Ubaidillah, E. A. H. Engku
    Afendi, M.
    Daud, R.
    Amin, N. A. M.
    MECHANICAL AND MATERIALS ENGINEERING, 2014, 554 : 189 - +
  • [17] Fatigue Behavior of Kenaf Fibre Reinforced Epoxy Composites
    Abdullah, Abdul Hakim
    Alias, Siti Khadijah
    Jenal, Norhisyam
    Abdan, Khalina
    Ali, Aidy
    ENGINEERING JOURNAL-THAILAND, 2012, 16 (05): : 105 - 113
  • [18] Investigation of flax fibre reinforced epoxy friction composites
    Taha, I.
    MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 2012, 43 (12) : 1059 - 1066
  • [19] Mechanical properties of flax fibre reinforced epoxy composites
    George, J
    Ivens, J
    Verpoest, I
    ANGEWANDTE MAKROMOLEKULARE CHEMIE, 1999, 272 : 41 - 45
  • [20] Flammability Behavior of Hemp Fibre Reinforced Epoxy Composites
    Koyuncu, Menderes
    INZYNIERIA MINERALNA-JOURNAL OF THE POLISH MINERAL ENGINEERING SOCIETY, 2024, (01):
12345