High-temperature tribological properties of NiCoCrAlY-WSe2-BaF2•CaF2 solid lubricant coatings prepared by plasma spraying

被引:0
|
作者
Chen, X. H. [1 ]
Yuan, X. J. [1 ]
Xia, J. [1 ]
Yu, Z. H. [1 ]
机构
[1] Xian Res Inst Hitech, Xian 710025, Shaanxi Provinc, Peoples R China
关键词
D O I
10.1088/1757-899X/103/1/012052
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
In this paper, NiCoCrAlY-WSe2-BaF2 center dot CaF2 solid lubricant coatings were produced on a substrate by plasma spray and investigated at the high temperature, such as 500 degrees C and 800 degrees C. The structure of the coatings was characterized using XRD pattern and scanning electron microscopy. The TC1 (83wt% NiCoCrAlY) coating has a low friction coefficient at 500 degrees C, where the WSe2 is a good solid lubricant. The TC2 (65wt% NiCoCrAlY) coating has the low friction coefficient (0.279) at 800 degrees C, due to the formation of BaCrO4 on the surfaces. As a result, the TC2 coating has the optimal tribological property in the wide temperature.
引用
收藏
页数:5
相关论文
共 50 条
  • [41] The Microstructure and Mechanical Properties of High Entropy Alloy CoCrFeNiMn Matrix with Cr3C2 Reinforcement and Ag, BaF2/CaF2 Solid Lubrication
    Guo, Zhiming
    Li, Jingdan
    Ren, Xiaoyan
    COATINGS, 2023, 13 (11)
  • [42] Plasma Spraying NiCoCrAlY-Cr2O3-AgMo Coatings: Fabrication and Tribological Mechanisms (vol 14, 1233, 2024)
    Zhao, Yafei
    Gao, Yanping
    Zhai, Zhaoyang
    Zhang, Yanchao
    Zhang, Dongya
    COATINGS, 2024, 14 (12):
  • [43] Effect of CaF2 on thermal shock resistance of Yb2Si2O7-based high-temperature abradable sealing coatings: Simulation and experiment
    Zhu, Yongwang
    Wang, Jintao
    Li, Jieping
    Hong, Du
    Liu, Xiaomin
    Wang, Liang
    Xie, Lingling
    Niu, Yaran
    Zheng, Xuebin
    SURFACE & COATINGS TECHNOLOGY, 2025, 498
  • [44] Thermal-mechanical driven oxidation of NiCr-Cr3C2-BaF2/CaF2 composite coating at high temperature
    Feng, Kaili
    Wang, Tianying
    Liang, Yimai
    Wang, Rong
    Wang, Changliang
    Shao, Tianmin
    CORROSION SCIENCE, 2022, 208
  • [45] Microstructure and properties of CrB2-Cr3C2 composite coatings prepared by plasma spraying
    Wang, Yan-wei
    Sun, Xiao-wen
    Wang, Lei
    Yang, Yong
    Ren, Xian-xing
    Ma, Yu-duo
    Cui, Yu-hang
    Sun, Wen-wei
    Wang, Xing-yu
    Dong, Yan-chun
    SURFACE & COATINGS TECHNOLOGY, 2021, 425 (425):
  • [46] Microstructure and properties of Al2O3-ZrO2-TiO2 composite coatings prepared by plasma spraying
    Gao, Peng-Yue
    Ma, Yu-Duo
    Sun, Wen-Wei
    Yang, Yong
    Zhang, Chen
    Cui, Yu-Hang
    Wang, Yan-Wei
    Dong, Yan-Chun
    RARE METALS, 2021, 40 (07) : 1825 - 1834
  • [47] Structure, mechanical, and tribological properties of Ag2CrO4 high-temperature oxide coatings
    Zeng, Zhong
    Zhang, Lei
    Pelenovich, Vasiliy
    Wan, Qiang
    Zhan, Xinggang
    Xu, Tao
    Hu, Longwei
    Liu, Yan
    Li, Zhenggang
    Yang, Bing
    Chen, Yanming
    THIN SOLID FILMS, 2024, 807
  • [48] Mechanical and tribological properties of sputter deposited nanostructured Cr-WS2 solid lubricant coatings
    Deepthi, B.
    Barshilia, Harish C.
    Rajam, K. S.
    Konchady, Manohar S.
    Pai, Devdas M.
    Sankar, Jagannathan
    SURFACE & COATINGS TECHNOLOGY, 2010, 205 (07): : 1937 - 1946
  • [49] TSL and OSL Properties of Cu-doped CaF2 Ceramics Prepared by Spark Plasma Sintering
    Kato, Takumi
    Nakauchi, Daisuke
    Kawaguchi, Noriaki
    Yanagida, Takayuki
    SENSORS AND MATERIALS, 2022, 34 (02) : 653 - 660
  • [50] Microstructure and tribological properties of laser-clad Ni-Cr/TiB2 composite coatings on copper with the addition of CaF2
    Yan, Hua
    Zhang, Peilei
    Yu, Zhishui
    Lu, Qinghua
    Yang, Shanglei
    Li, Chonggui
    SURFACE & COATINGS TECHNOLOGY, 2012, 206 (19-20): : 4046 - 4053