Processing and structural characterisation of 3Y-TZP ceramics resistant to hydrothermal ageing

被引：11

作者：

Rodriquez-Pulido, A ^{[1
]}

Ross, IM ^{[1
]}

Rainforth, WM ^{[1
]}

机构：

[1] Univ Sheffield, Dept Mat Engn, Sheffield S1 3JD, S Yorkshire, England

来源：

EURO CERAMICS VII, PT 1-3 | 2002年 / 206-2卷

关键词：

tetragonal zirconia polycrystals; hydrothermal ageing; powder-processing; microstructure;

D O I：

10.4028/www.scientific.net/KEM.206-213.1053

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Doped tetragonal zirconia polycrystals (TZP's) have been prepared by the addition of 0, 0.05 and 0.25wt% Al2O3 to a 3mol% ZrO2 powder via co-milling. A modal grain size of 0.34-0.38 mum and fracture toughness K-1c in the range 7.5-7.9 MPa rootm was achieved for all samples after sintering at 1450 degreesC for 3 hours. The addition of trace Al2O3 is shown to have a profound effect on the materials resistance to hydrothermal ageing which was found to increase in the order 0 <0.05 <0.25wt% Al2O3.

引用

下载

页码：1053 / 1056

页数：4

共 50 条

[41] Microstructure and mechanical properties of 3Y-TZP ceramics by low temperature sintering
Sun, Yihai
Zhang, Yufeng
Guo, Jingkun
Kuei Suan Jen Hsueh Pao/ Journal of the Chinese Ceramic Society, 2002, 30 (03): : 267 - 271
[42] Preparation and properties of anti-static coating on the 3Y-TZP ceramics
Yang, Xianfeng
Ni, Zhentao
Yang, Xiaole
He, Qinglong
Xie, Hehan
Xu, Xiewen
Xie, Zhipeng
CERAMICS INTERNATIONAL, 2018, 44 (14) : 16459 - 16463
[43] Enhanced Hydrothermal Resistance of Y-TZP Ceramics Through Colloidal Processing
Rayon, E.
Moreno, R.
Alcazar, C.
Salvador, M. D.
Manjon, F. J.
Jimenez-Pique, E.
LLanes, L.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2013, 96 (04) : 1070 - 1076
[44] In vivo ageing of zirconia dental ceramics - Part II: Highly-translucent and rapid-sintered 3Y-TZP
Cotic, Jasna
Kocjan, Andraz
Panchevska, Sanja
Kosmac, Tomaz
Jevnikar, Peter
DENTAL MATERIALS, 2021, 37 (03) : 454 - 463
[45] Degradation resistance of 3Y-TZP ceramics sintered using spark plasma sintering
Chintapalli, R.
Marro, F. G.
Valle, J. A.
Yan, H.
Reece, M. J.
Anglada, M.
5TH INTERNATIONAL EEIGM/AMASE/FORGEMAT CONFERENCE ON ADVANCED MATERIALS RESEARCH, 2009, 5
[46] Effect of holding time on the mechanical properties and microstructural evaluation of 3Y-TZP ceramics
Golieskardi, M.
Satgunam, M.
Ragurajan, D.
JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY, 2017, 53 (02) : 1001 - 1006
[47] Effect of testing parameters on wear properties of alumina strengthen 3Y-TZP ceramics
Zhao, Shihai
Xin, Shaobo
Wang, Xiaohui
Liang, Xiaoping
HIGH-PERFORMANCE CERAMICS IV, PTS 1-3, 2007, 336-338 : 2468 - +
[48] Effect of BaTiO3 addition on structures and mechanical properties of 3Y-TZP ceramics
Yang, B
Chen, XM
Liu, XQ
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2000, 20 (08) : 1153 - 1158
[49] Deceleration of hydrothermal degradation of 3Y-TZP by alumina and lanthana co-doping
Nogiwa-Valdez, A. A.
Rainforth, W. M.
Zeng, P.
Ross, I. M.
ACTA BIOMATERIALIA, 2013, 9 (04) : 6226 - 6235
[50] Characterization of 3Y-TZP/TiO2 hybrid experimental dental ceramics
Miranda, Ranulfo Benedito de Paula
Ussui, Valter
Lazar, Dolores Ribeiro Ricci
de Lima, Nelson Batista
Marchi, Juliana
Cesar, Paulo Francisco
CERAMICS INTERNATIONAL, 2023, 49 (10) : 15734 - 15740

← 1 2 3 4 5 →