ON THE MECHANISMS OF FATIGUE CRACK PROPAGATION IN STRUCTURAL MATERIALS

被引:0
|
作者
Gavras, Anastasios G. [1 ]
Lados, Diana A. [1 ]
机构
[1] Worcester Polytech Inst, Dept Mech Engn, Integrat Mat Design Ctr, Worcester, MA 01609 USA
关键词
Fatigue Crack Growth; Wrought and Cast Light Metals; Microstructure; MG CAST ALLOYS; GROWTH-BEHAVIOR; RESIDUAL-STRESS; TITANIUM-ALLOY; MICROSTRUCTURES; TI-6AL-4V; CLOSURE; IRONS; RATIO;
D O I
暂无
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
Fatigue crack growth mechanisms of long and small cracks were investigated in cast and wrought aluminum alloys, titanium alloys and gray irons with various microstructures resulting from changes in heat treatment and chemistry. Microstructural effects on the fatigue crack growth response of each material were evaluated. Long crack growth data were generated on compact tension specimens tested at low, intermediate and high stress ratios (R=0.1, R=0.5 and R=0.7). Small crack growth testing was performed on corner and surface flaw tension specimens at low stress ratio, R=0.1. Fatigue crack growth mechanisms with and without crack closure were identified. Corrective techniques compensating for closure and microstructural effects on fatigue crack growth data will be presented and discussed.
引用
收藏
页码:93 / 110
页数:18
相关论文
共 50 条
  • [31] Mechanisms of intergranular fatigue crack initiation in polycrystalline materials
    Polak, Jaroslav
    Chlupova, Alice
    [J]. 10TH INTERNATIONAL CONFERENCE ON MATERIALS STRUCTURE AND MICROMECHANICS OF FRACTURE, MSMF, 2023, 43 : 197 - 202
  • [32] Mechanisms of fatigue-crack propagation in ductile and brittle solids
    R.O. Ritchie
    [J]. International Journal of Fracture, 1999, 100 : 55 - 83
  • [33] USE OF ELECTRON MICROFRACTOGRAPHY IN INTERPRETING MECHANISMS OF FATIGUE CRACK PROPAGATION
    NAIR, KD
    LEMAY, I
    [J]. MATERIALS RESEARCH AND STANDARDS, 1968, 8 (05): : 65 - &
  • [34] Mechanisms of fatigue-crack propagation in ductile and brittle solids
    Ritchie, RO
    [J]. INTERNATIONAL JOURNAL OF FRACTURE, 1999, 100 (01) : 55 - 83
  • [35] TOUGHENED EPOXY POLYMERS - FATIGUE-CRACK PROPAGATION MECHANISMS
    AZIMI, HR
    PEARSON, RA
    HERTZBERG, RW
    [J]. ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 1994, 207 : 134 - PMSE
  • [36] Mechanisms and modeling of intrinsic and environmentally assisted fatigue crack propagation
    Petit, J
    Sarrazin-Baudoux, C
    Hénaff, G
    [J]. PROGRESS IN MECHANICAL BEHAVIOUR OF MATERIALS (ICM8), VOL 1: FATIGUE AND FRACTURE, 1999, : 3 - 11
  • [37] A peridynamic approach to simulating fatigue crack propagation in composite materials
    Ni, Tao
    Zaccariotto, Mirco
    Galvanetto, Ugo
    [J]. PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, 2023, 381 (2240):
  • [38] Fatigue crack propagation behavior of underfill materials in microelectronic packaging
    Zhang, JP
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2001, 314 (1-2): : 194 - 200
  • [39] Fatigue crack propagation
    Totten, George
    [J]. ADVANCED MATERIALS & PROCESSES, 2008, 166 (05): : 39 - 41
  • [40] Structural influence on crack propagation behaviour in elastomeric materials
    Horst, T.
    Heinrich, G.
    [J]. CONSTITUTIVE MODELS FOR RUBBER VI, 2010, : 331 - 336