Effects of heating rate on microstructure and transparency of spark-plasma-sintered alumina

被引：141

作者：

Kim, Byung-Nam ^{[1
]}

Hiraga, Keijiro ^{[1
]}

Morita, Koji ^{[1
]}

Yoshida, Hidehiro ^{[1
]}

机构：

[1] Natl Inst Mat Sci, Tsukuba, Ibaraki 3050047, Japan

来源：

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY | 2009年 / 29卷 / 02期

关键词：

Grain growth; Sintering; Porosity; Optical properties; Al2O3; GRAIN-GROWTH; DENSIFICATION; STRENGTH;

D O I：

10.1016/j.jeurceramsoc.2008.03.015

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Commercial alumina powder was densified by spark plasma sintering (SPS) at 1150 degrees C. During SPS processing, the effects of the heating rate were examined on microstructure and transparency. With decreasing heating rate, the grain size and the residual porosity decreased, while the transparency increased. At a heating rate of 2 degrees C/min, the grain size was 0.29 mu m, and the in-line transmission was 46% for a wavelength of 640 nm. The mechanisms for the fine microstructure and low porosity at slow heating, which are conflicting with some existing results, were explained by considering the role of defect concentration and grain-boundary diffusion during densification. (C) 2008 Elsevier Ltd. All rights reserved.

引用

页码：323 / 327

页数：5

共 50 条

[41] Effects of hydrogen reduction on the thermoelectric properties of spark-plasma-sintered Bi2Te3-based compounds
Lim, CH
Cho, DC
Lee, YS
Lee, CH
Kim, KT
Lee, DM
JOURNAL OF THE KOREAN PHYSICAL SOCIETY, 2005, 46 (04) : 995 - 1000
[42] Dynamic compressive and tensile strengths of spark plasma sintered alumina
Girlitsky, I.
Zaretsky, E.
Kalabukhov, S.
Dariel, M. P.
Frage, N.
JOURNAL OF APPLIED PHYSICS, 2014, 115 (24)
[43] Dynamic yield and tensile strengths of spark plasma sintered alumina
Girlitsky, I.
Zaretsky, E.
Kalabukhov, S.
Dariel, M.
Frage, N.
18TH APS-SCCM AND 24TH AIRAPT, PTS 1-19, 2014, 500
[44] The effect of heating rate and composition on the properties of spark plasma sintered zirconium diboride based composites
Snyder, Alexandra
Bo, Zhenyu
Hodson, Stephen
Fisher, Timothy
Stanciu, Lia
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 538 : 98 - 102
[45] Thermoelectric Enhancement of Spark-Plasma-Sintered Cu2Te Induced by Graphene Sheets
Ju, Hyun
Park, Dabin
Kim, Minsu
Kim, Jooheon
POLYMER-KOREA, 2022, 46 (01) : 122 - 126
[46] The Fabrication and Characterization of Spark Plasma Sintered Nickel Based Binary Alloy at Different Heating Rate
Babalola, B. J.
Shongwe, M. B.
Rominiyi, A. L.
Legele, P. L.
Popoola, A. P., I
JOURNAL OF MICRO AND NANO-MANUFACTURING, 2019, 7 (03):
[47] Impedance study of spark-plasma-sintered lutetium titanate ceramics: Effect of post-annealing
An, Liqiong
Zhang, Jian
Fan, Runhua
Goto, Takashi
Wang, Shiwei
CERAMICS INTERNATIONAL, 2019, 45 (13) : 16317 - 16322
[48] Effects of heating rate on microstructure and property of sintered reaction bonded silicon nitrides
Nakashima, Yuki
Zhou, You
Tanabe, Keisuke
Arima, Souhei
Okuno, Teruhisa
Hirao, Kiyoshi
Ohji, Tatsuki
Fukushima, Manabu
JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 2023, 131 (08) : 475 - 481
[49] Effects of SiC on phase transformation and microstructure of spark plasma sintered α/β=SiAlON composite ceramics
Yu, Kejuan
Yin, Zengbin
Guo, Fuzhou
Yuan, Juntang
INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 2023, 20 (02) : 1205 - 1214
[50] Effect of compaction pressure and heating rate on microstructure and mechanical properties of spark plasma sintered Ti6Al4V alloy
Garbiec, Dariusz
Siwak, Piotr
Mroz, Adrian
ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, 2016, 16 (04) : 702 - 707

← 1 2 3 4 5 →