Tribological Behavior of Copper and Graphite of Layered Friction Materials

被引:8
|
作者
Han, Xiaoming [1 ]
Yang, Junying [1 ]
Nong, Wanhua [2 ]
Wang, Changfeng [1 ]
机构
[1] Dalian Jiaotong Univ, Engn Res Ctr Continuous Extrus, Minist Educ, Dalian, Liaoning, Peoples R China
[2] Guangxi Univ Sci & Technol, Dept Mech Engn, Lushan Coll, Liuzhou, Guangxi, Peoples R China
关键词
Tribological behavior; copper; graphite; friction coefficient; MATRIX COMPOSITES; WEAR BEHAVIOR;
D O I
10.1080/10402004.2020.1777362
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
Copper and graphite are the main components of copper-based brake materials commonly used in high-speed trains. Their interaction influences the tribological performance of copper-based brake materials. In this article, with copper and graphite as the materials, three kinds of layered samples were prepared as pins and tested against a disc made of H13 steel. Friction tests were conducted under the condition of 0.8-2.35 m/s and pressure of 0.5 MPa using a pin-on-disc tribometer. Results showed that the friction coefficient decreased with an increase in the angle between boundary orientation and the friction direction in the range of 0 degrees-90 degrees. When the angle was 90 degrees, the interaction between copper and graphite was the strongest. Graphite provided positions for friction film accumulation. Copper and its friction film covered and protected the graphite and boundary and reduced the friction coefficient.
引用
收藏
页码:906 / 912
页数:7
相关论文
共 50 条
  • [41] Tribological behavior of graphite/brass composite
    1600, NACE International (52):
  • [42] Friction and wear behavior of copper-graphite material under electrical current
    Shanghai Key Laboratory for R and D and Application of Metallic Functional Materials, School of Materials Science and Engineering, Tongji University, Shanghai 200092, China
    不详
    不详
    Mocaxue Xuebao, 2008, 2 (167-172): : 167 - 172
  • [43] Friction and Wear Behavior of Copper Matrix Composites Reinforced with SiC and Graphite Particles
    Yongzhong Zhan
    Guoding Zhang
    Tribology Letters, 2004, 17 : 91 - 98
  • [44] Friction and wear behavior of copper matrix composites reinforced with SiC and graphite particles
    Zhan, YZ
    Zhang, GD
    TRIBOLOGY LETTERS, 2004, 17 (01) : 91 - 98
  • [45] Influence of the contact parameters and several graphite materials on the tribological behaviour of graphite/copper two-disc electrical contacts
    Kalin, Mitjan
    Poljanec, Dejan
    TRIBOLOGY INTERNATIONAL, 2018, 126 : 192 - 205
  • [46] Effect of carbonization on mechanical and tribological behavior of a copper-phenolic-based friction material
    Ho, SC
    Lin, JHC
    Ju, CP
    CARBON, 2005, 43 (03) : 491 - 502
  • [47] TRIBOLOGICAL BEHAVIOR OF GRAPHITE GRAPHITE AND GRAPHITE COPPER COUPLES IN SLIDING ELECTRICAL CONTACT - INFLUENCE OF THE CONTACT ELECTRIC-FIELD ON THE SURFACE PASSIVATION
    HOUNKPONOU, E
    NERY, H
    PAULMIER, D
    BOUCHOUCHA, A
    ZAIDI, H
    APPLIED SURFACE SCIENCE, 1993, 70-1 : 176 - 179
  • [48] Influence of sliding velocity on friction properties of copper-graphite slide plate materials
    Zhang, Bin
    Hu, Zheng-Fei
    He, Guo-Qiu
    Ma, Xing-Chi
    Cailiao Kexue yu Gongyi/Material Science and Technology, 2010, 18 (03): : 363 - 367
  • [49] Study on micro-plastic behavior and tribological characteristics of granular materials in friction process
    Wang, Gang
    Wang, Wei
    Zhang, Yi
    Zhang, Xu
    Hu, Zhaowen
    Liu, Kun
    Wei, Daogao
    INDUSTRIAL LUBRICATION AND TRIBOLOGY, 2021, 73 (08) : 1098 - 1104
  • [50] The Effect of Spherical Silica Powder on the Tribological Behavior of Phenolic Resin–Based Friction Materials
    Hongyun Jin
    Yaoqing Wu
    Shuen Hou
    Yunlong Li
    Min Liu
    Zhengjia Ji
    Jiao Yuan
    Tribology Letters, 2013, 51 : 65 - 72