Impact of Inkjet and 3D Printing Methods on Low Weight and Complex Structure Antennas

被引：0
|
作者：
Sharma, Satish K. [1 ]
机构：
[1] San Diego State Univ, Dept Elect & Comp Engn, AML, 5500 Campanile Dr, San Diego, CA 92182 USA
来源：
2018 18TH INTERNATIONAL SYMPOSIUM ON ANTENNA TECHNOLOGY AND APPLIED ELECTROMAGNETICS (ANTEM 2018) | 2018年
关键词：
Inkjet printing; 3D printing; Conformal antennas; 5G Technology antennas;
D O I：
暂无
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
In this paper, impact of the inkjet and 3D printing methods on design and development of the novel antennas and arrays is discussed. Both techniques have got great attention in the recent years and arc going to receive further importance as we move towards the 5G technolop. era. Some examples of inkjet and 3D printed antennas being carried out in the Antenna and Microwave Lab (AML) at San Diego State University will be discussed. The author had an opportunity to learn antennas while working with Prof. Lot Shafai at the University of Manitoba. This provided the author a very high impact antenna engineering hands-on-training and which has contributed to his profession and in educating several other antenna engineers.
引用
收藏
页数：2
相关论文
共 50 条
  • [41] Investigation on fabricating 3D structures using inkjet printing technology
    Ibrahim, Mustaffa
    Otsubo, Takayuki
    Narahara, Hiroyuki
    Koresawa, Hiroshi
    Suzuki, Hiroshi
    [J]. TOWARDS SYNTHESIS OF MICRO - /NANO - SYSTEMS, 2007, (05): : 209 - +
  • [42] Inkjet printing of 3D metal-insulator-metal crossovers
    Sanchez-Romaguera, Veronica
    Madec, Marie-Beatrice
    Yeates, Stephen G.
    [J]. REACTIVE & FUNCTIONAL POLYMERS, 2008, 68 (06): : 1052 - 1058
  • [43] Impact of inkjet printing parameters and environmental conditions on formation of 2D and 3D binder jetting geometries
    Colton, Trenton
    Inkley, Colton
    Berry, Adam
    Crane, Nathan B.
    [J]. JOURNAL OF MANUFACTURING PROCESSES, 2021, 71 : 187 - 196
  • [44] Electronic circuit printing, 3D printing and film formation utilizing electrostatic inkjet technology
    Kawamoto, Hiroyuki
    [J]. NIP 23: 23RD INTERNATIONAL CONFERENCE ON DIGITAL PRINTING TECHNOLOGIES, TECHNICAL PROGRAM AND PROCEEDINGS/DIGITAL FABRICATION 2007, 2007, : 961 - 964
  • [45] 3D Printing Latex: A Route to Complex Geometries of High Molecular Weight Polymers
    Scott, Philip J.
    Meenakshisundaram, Viswanath
    Hegde, Maruti
    Kasprzak, Christopher R.
    Winkler, Christopher R.
    Feller, Keyton D.
    Williams, Christopher B.
    Long, Timothy E.
    [J]. ACS APPLIED MATERIALS & INTERFACES, 2020, 12 (09) : 10918 - 10928
  • [46] Fabrication of Capacitive Acoustic Resonators Combining 3D Printing and 2D Inkjet Printing Techniques
    Haque, Rubaiyet Iftekharul
    Ogam, Erick
    Loussert, Christophe
    Benaben, Patrick
    Boddaert, Xavier
    [J]. SENSORS, 2015, 15 (10) : 26018 - 26038
  • [47] Analysis of Dispense and Water Transfer Printing as Fabrication Methods for UHF Antennas on 3D Printed Substrates
    Gurusekaran, Arvind
    Ahmad, Mukhtar
    Ciocca, Manuela
    Avancini, Enrico
    Lugli, Paolo
    Petti, Luisa
    [J]. 6TH IEEE ELECTRON DEVICES TECHNOLOGY AND MANUFACTURING CONFERENCE (EDTM 2022), 2022, : 110 - 112
  • [48] Fabrication antennas with 2D and 3D printing technologies: Review
    Grudzinski, Dariusz T.
    Sloma, Marcin
    [J]. PHOTONICS APPLICATIONS IN ASTRONOMY, COMMUNICATIONS, INDUSTRY, AND HIGH-ENERGY PHYSICS EXPERIMENTS 2019, 2019, 11176
  • [49] 3D printing the pterygopalatine fossa: a negative space model of a complex structure
    Ross Bannon
    Shivani Parihar
    Yiannis Skarparis
    Ourania Varsou
    Enis Cezayirli
    [J]. Surgical and Radiologic Anatomy, 2018, 40 : 185 - 191
  • [50] 3D printing the pterygopalatine fossa: a negative space model of a complex structure
    Bannon, Ross
    Parihar, Shivani
    Skarparis, Yiannis
    Varsou, Ourania
    Cezayirli, Enis
    [J]. SURGICAL AND RADIOLOGIC ANATOMY, 2018, 40 (02) : 185 - 191
12345