NeT bead-on-plate round robin: Comparison of residual stress predictions and measurements

被引：101
|
作者：
Smith, M. C. [1 ]
Smith, A. C. [1 ]
机构：
[1] British Energy Generat Ltd, Barnwood GL4 3RS, Glos, England
来源：
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING | 2009年 / 86卷 / 01期
关键词：
Weld residual stress simulation; Benchmarking; Accuracy; Comparison with measurements; Material hardening models;
D O I：
10.1016/j.ijpvp.2008.11.017
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The members of the European network NeT have undertaken parallel round robin activities measuring and simulating the residual stresses generated by laying a single Tungsten Inert Gas (TIC) weld bead on an AISI Type 316L austenitic stainless steel flat plate. This is a strongly three-dimensional configuration with many of the characteristics of a repair weld. The round robin finite element predictions of weld residual stresses are compared with each other in order to identify the effects on the predicted residual stresses of material hardening model, global heat input, mechanical and thermal boundary conditions, and the handling of high temperature inelastic strains. Comparison with the residual stress measurements then leads to the optimum choices for these variables. (C) 2008 Published by Elsevier Ltd.
引用
收藏
页码：79 / 95
页数：17
相关论文
共 50 条
  • [21] Analysis of thermal stress and distortion in bead-on-plate welding using laminated isotropic plate theory
    Hyundai Heavy Industry Co, Ltd, Ulsan, Korea, Republic of
    J Mater Process Technol, 3-4 (337-344):
  • [22] An analysis of thermal stress and distortion in bead-on-plate welding using laminated isotropic plate theory
    Bae, KY
    Na, SJ
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1996, 57 (3-4) : 337 - 344
  • [23] The NeT Task Group 4 residual stress measurement and analysis round robin on a three-pass slot-welded plate specimen
    Smith, Mike C.
    Smith, Ann C.
    Ohms, Carsten
    Wimpory, Robert C.
    INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2018, 164 : 3 - 21
  • [24] COMPARISON OF TECHNIQUES FOR RESIDUAL STRESS DETERMINATION IN A BEAD ON PLATE TITANIUM SAMPLE.
    Brown, D.K.
    Owens, A.
    Strain, 1986, 22 (02) : 71 - 76
  • [25] Temperature and residual stress simulations of the NeT single-bead-on-plate specimen using SYSWELD
    Xu, J. J.
    Gilles, P.
    Duan, Y. G.
    Yu, C.
    INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2012, 99 : 51 - 60
  • [26] TLyLz method and T method for measurement of 3 dimensional residual stresses in bead-on-plate welds
    Ueda, Yukio
    Ma, Ning Xu
    Koki, Ryouchi
    Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, 1993, 11 (04): : 555 - 562
  • [27] METHODS FOR UNCERTAINTY QUANTIFICATION AND COMPARISON OF WELD RESIDUAL STRESS MEASUREMENTS AND PREDICTIONS
    Lewis, John R.
    Brooks, Dusty
    Benson, Michael L.
    PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2017, VOL 6B, 2017,
  • [28] IMPEDANCE TUBE MEASUREMENTS - A ROUND-ROBIN COMPARISON
    PEPPIN, RJ
    HAINES, J
    ENGINEERING FOR ENVIRONMENTAL NOISE CONTROL, VOLS 1 AND 2: INTER-NOISE 89, 1989, : 1103 - 1108
  • [29] THE NET TASK GROUP 6 WELD RESIDUAL STRESS MEASUREMENT AND SIMULATION ROUND ROBIN IN ALLOY 600/82
    Smith, Mike C.
    Muransky, Ondrej
    Akrivos, Vasileios
    Angles, Jean
    PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2016, VOL 6B, 2017,
  • [30] Comparison of residual stress predictions and measurements using excimer laser layer removal
    Jansen, KMB
    Orij, JJW
    Meijer, CZ
    Van Dijk, DJ
    POLYMER ENGINEERING AND SCIENCE, 1999, 39 (10): : 2030 - 2041
12345