Determination of flow stress and the critical strain for the onset of dynamic recrystallization using a hyperbolic tangent function

被引：25
|
作者：
Solhjoo, Soheil [1 ]
机构：
[1] Univ Groningen, Fac Math & Nat Sci, Groningen, Netherlands
来源：
MATERIALS & DESIGN | 2014年 / 54卷
关键词：
INITIATION;
D O I：
10.1016/j.matdes.2013.08.055
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A new model has been developed to estimate the flow stress under hot deformation conditions up to the peak of the stress-strain curves. This model is derived from the general form of hyperbolic function by introducing an additional parameter to bring the results to a more acceptable level. Stress-strain curves and the critical strain of a '304 austenitic stainless steel' are determined with an average percentage error of 1.24. The model is also used to obtain an equation which has the ability of predicting the critical strain for the onset of dynamic recrystallization. (C) 2013 Elsevier Ltd. All rights reserved.
引用
收藏
页码：390 / 393
页数：4
相关论文
共 50 条
  • [31] Dynamic recrystallization of wet synthetic polycrystalline halite: dependence of grain size distribution on flow stress, temperature and strain
    Ter Heege, JH
    De Bresser, JHP
    Spiers, CJ
    TECTONOPHYSICS, 2005, 396 (1-2) : 35 - 57
  • [32] PID controller design with Hyperbolic Tangent weighted error function using GA
    Verma, Bharat
    Padhy, Prabin Kumar
    2018 5TH INTERNATIONAL CONFERENCE ON SIGNAL PROCESSING AND INTEGRATED NETWORKS (SPIN), 2018, : 792 - 795
  • [33] Determination of the critical conditions for the initiation of dynamic recrystallization in boron microalloyed steels
    Mejia, I.
    Bedolla-Jacuinde, A.
    Maldonado, C.
    Cabrera, J. M.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (12): : 4133 - 4140
  • [34] Flow Behavior and the Critical Strain of Dynamic Recrystallization for Mg-10.22Gd-2.31Y-0.1Zr Alloy
    Bao, Jian
    Li, Quanan
    Chen, Xiaoya
    Wang, Songbo
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2021, 74 (09) : 2149 - 2159
  • [35] Effect of Grain Size and Processing Parameters on Critical Strain for Austenite Dynamic Recrystallization
    Xing, J.
    Zhu, G. H.
    Ding, H. L.
    Li, F.
    Wang, Y. Q.
    Wu, B. Q.
    PHYSICS OF METALS AND METALLOGRAPHY, 2022, 123 (13): : 1299 - 1305
  • [36] Investigation on critical strain of dynamic recrystallization for SiCp/Al-Cu composite
    Sun, Yali
    Xie, Jingpei
    Hao, Shiming
    Wang, Aiqin
    Liu, Pei
    Li, Min
    2015 GLOBAL CONFERENCE ON POLYMER AND COMPOSITE MATERIALS (PCM2015), 2015, 87
  • [37] Flow Behavior and the Critical Strain of Dynamic Recrystallization for Mg-10.22Gd-2.31Y-0.1Zr Alloy
    Jian Bao
    Quanan Li
    Xiaoya Chen
    Songbo Wang
    Transactions of the Indian Institute of Metals, 2021, 74 : 2149 - 2159
  • [38] Effect of Grain Size and Processing Parameters on Critical Strain for Austenite Dynamic Recrystallization
    J. Xing
    G. H. Zhu
    H. L. Ding
    F. Li
    Y. Q. Wang
    B. Q. Wu
    Physics of Metals and Metallography, 2022, 123 : 1299 - 1305
  • [39] Critical strain of dynamic recrystallization of 45Cr4NiMoV steel
    Chen, Xue-Wen
    Chen, Tian-An
    Zhou, Hui-Jun
    Zhu, Mei-Ling
    Cailiao Rechuli Xuebao/Transactions of Materials and Heat Treatment, 2015, 36 (01): : 109 - 113
  • [40] Dynamic Preisach model in giant magnetostrictive actuator based on hyperbolic tangent function hysteresis operators
    Zhu, Y. (meeyczhu@nuaa.edu.cn), 1600, Chinese Mechanical Engineering Society (50):
12345