Real-time or faster-than-real-time simulation of airflow in buildings

Real-time flow simulation is crucial for emergency management in buildings, such as fire and accidental or intentional release of chemical/biological agents (contaminants). The simulation results can then be used to impose proper measures to minimize casualties. Computational fluid dynamics (CFD) is accurate, but too time-consuming. Nodal models are fast, but not informative. To obtain a quick and informative solution, this study proposes an intermediate approach between nodal models and CFD by introducing a fast fluid dynamics (FFD) method. This investigation used the FFD methods with and without turbulence treatments to study systematically four basic flows in buildings, and compared the numerical results with the corresponding CFD results and the data from the literature. The results show that, on one hand, the FFD can offer much richer flow information than nodal models, but less accurate results than CFD. On the other hand, the FFD is 50 times faster than the CFD. The results also show that the FFD with the laminar assumption has the best overall performance as regards both accuracy and speed. It is possible to conduct faster-than-real-time flow simulations with detailed flow information by using the FFD method.The paper introduces a fast fluid dynamics (FFD) method, which can simulate airflow and contaminant dispersion in buildings with real-time or faster-than-real-time speed and provide informative solutions. As an intermediate approach between nodal models and the computational fluid dynamics (CFD), the FFD can be a very useful tool for emergency management in case of fire and accidental or intentional release of chemical or biological agents in a building or around the buildings. The FFD can also be used as a preliminary test tool for quick assessment of indoor airflows before a detailed CFD analysis.