Experimental and numerical investigation of fatigue damage due to wave-induced vibrations in a containership in head seas

Fatigue cracks have been known to occur in welded ships for several decades. For large ocean-going ships wave-induced vibrations can, depending on trade and design, cause up to 50% of the fatigue damage. The vibrations may be due to springing and whipping effects. In this paper, we address the fatigue damage caused by wave-induced vibrations in a containership of newer design trading in the North Atlantic. The fatigue damage was obtained both experimentally and numerically. The experimental results were found from tests performed with a flexible model of the ship, while the numerical predictions were done using nonlinear hydroelastic strip theory. The measurements showed that the wave-induced vibrations contributed approximately 40% of the total fatigue damage. The numerical method predicted the wave frequency damage well, but was found to overestimate the total fatigue damage by 50%. This was mainly due to an overprediction of the wave-induced vibrations. The discrepancy is partly related to three-dimensional (3D) effects which are not included in the two-dimensional (2D) slamming calculation, and partly to an overprediction of the springing contribution. Moreover, the numerical method does not account for the steady wave due to forward speed. By using a simplified approach we show that high-frequency damage can be significantly reduced by including the steady wave for the relevant vessel, implying better agreement with the experimental results.