3D Printed Alumina for Low-Loss Millimeter Wave Components

被引：29
|
作者：
Jimenez-Saez, Alejandro [1 ]
Schuessler, Martin [1 ]
Krause, Christopher [2 ]
Pandel, Damian [3 ,4 ]
Rezer, Kamil [2 ]
Vom Boegel, Gerd [2 ]
Benson, Niels [3 ,4 ]
Jakoby, Rolf [1 ]
机构：
[1] Tech Univ Darmstadt, Inst Microwave Engn & Photon, D-64289 Darmstadt, Germany
[2] Fraunhofer Inst Microelect Circuits & Syst IMS, D-47057 Duisburg, Germany
[3] Univ Duisburg Essen, Inst Technol Nanostruct, D-47057 Duisburg, Germany
[4] Univ Duisburg Essen, CENIDE, D-47057 Duisburg, Germany
来源：
IEEE ACCESS | 2019年 / 7卷
关键词：
Three-dimensional printing; photonic crystals; high Q-factor; SENSORS;
D O I：
10.1109/ACCESS.2019.2906034
中图分类号：
TP [自动化技术、计算机技术];
学科分类号：
0812 ;
摘要：
This paper compares the performance of three different materials and processing techniques suitable for low-loss mm-Wave components. The comparison is made by fabricating the same 2D photonic crystal structure in the W-band. Rogers RT/duroid (R) 6010.2LM and high resistive silicon are milled and etched, respectively. In addition, a novel technique consisting of 3D printed alumina is tested and its performance is compared with the technologies and materials above, which all have similar relative permittivities of around ten. The material characterization is carried out by means of high-Q resonator samples integrated into 2D photonic crystal structures. The results of these samples prove the high material purity and low loss of the 3D printed alumina structures, which opens up the use of this technology for high-permittivity low-loss mm-Wave components.
引用
收藏
页码：40719 / 40724
页数：6
相关论文
共 50 条
  • [1] Rapid Prototyping of Low Loss 3D Printed Waveguides for Millimeter-Wave Applications
    Shen, Junyu
    Aiken, Michael W.
    Abbasi, Morteza
    Parekh, Dishit P.
    Zhao, Xin
    Dickey, Michael D.
    Ricketts, David S.
    [J]. 2017 IEEE MTT-S INTERNATIONAL MICROWAVE SYMPOSIUM (IMS), 2017, : 41 - 44
  • [2] A low-loss 3D printed ridge waveguide via stereolithography
    Ramollari, Helio
    Measor, Philip
    [J]. INTEGRATED OPTICS: DEVICES, MATERIALS, AND TECHNOLOGIES XXVI, 2022, 12004
  • [3] A low-loss 3D printed rib waveguide using stereolithography
    Gusman, Dominic
    Ramollari, Helio
    Measor, Philip
    [J]. INTEGRATED OPTICS: DEVICES, MATERIALS, AND TECHNOLOGIES XXVII, 2023, 12424
  • [4] A 0.1 THz low-loss 3D printed hollow waveguide
    Li, Shuai
    Dai, Zijie
    Wang, Zhiguo
    Qi, Pengfei
    Su, Qiang
    Gao, Xiang
    Gong, Cheng
    Liu, Weiwei
    [J]. OPTIK, 2019, 176 : 611 - 616
  • [5] Lightweight and Low-Loss 3-D Printed Millimeter-Wave Bandpass Filter Based on Gap-waveguide
    Al-Juboori, Bahaa
    Zhou, Jiafeng
    Huang, Yi
    Hussein, Muaad
    Alieldin, Ahmed
    Otter, William J.
    Klugmann, Dirk
    Lucyszyn, Stepan
    [J]. IEEE ACCESS, 2019, 7 : 2624 - 2632
  • [6] Additive Micro-Fabrication for Low-loss Millimeter-wave Components
    David, F.
    Dalmay, C.
    Chatras, M.
    Blondy, P.
    Carpentier, L.
    Lapierre, L.
    [J]. 2017 IEEE MTT-S INTERNATIONAL MICROWAVE WORKSHOP SERIES ON ADVANCED MATERIALS AND PROCESSES FOR RF AND THZ APPLICATIONS (IMWS-AMP), 2017,
  • [7] 3D/Inkjet-printed Millimeter Wave Components and Interconnects for Communication and Sensing
    Georgiadis, Apostolos
    Kimionis, John
    Tentzeris, Manos M.
    [J]. 2017 IEEE COMPOUND SEMICONDUCTOR INTEGRATED CIRCUIT SYMPOSIUM (CSICS), 2017,
  • [8] Electrical Characterization of Millimeter-Wave Interconnects on Low-k and Low-loss Oxides for Advanced 3D Silicon Interposers
    Reig, B.
    Renaux, P.
    Sibuet, H.
    Mercier, D.
    Mounet, C.
    Ferrandon, C.
    Joblot, S.
    Bar, P.
    Coudrain, P.
    Carpentier, J. F.
    Lacrevaz, T.
    Flechet, B.
    [J]. 2011 6TH EUROPEAN MICROWAVE INTEGRATED CIRCUIT CONFERENCE, 2011, : 608 - 611
  • [9] Electrical Characterization of Millimeter-Wave Interconnects on Low-k and Low-loss Oxides for Advanced 3D Silicon Interposers
    Reig, B.
    Renaux, P.
    Sibuet, H.
    Mercier, D.
    Mounet, C.
    Ferrandon, C.
    Joblot, S.
    Bar, P.
    Coudrain, P.
    Carpentier, J. F.
    Lacrevaz, T.
    Flechee, B.
    [J]. 2011 41ST EUROPEAN MICROWAVE CONFERENCE, 2011, : 1169 - 1172
  • [10] Polymer-based 3D Printed Millimeter-wave Components for Spacecraft Payloads
    Lucyszyn, Stepan
    Shang, Xiaobang
    Otter, William J.
    Myant, Connor W.
    Cheng, Ran
    Ridler, Nick M.
    [J]. 2018 IEEE MTT-S INTERNATIONAL MICROWAVE WORKSHOP SERIES ON ADVANCED MATERIALS AND PROCESSES FOR RF AND THZ APPLICATIONS (IMWS-AMP), 2018,
12345